BMC/Intel-BMC/linux.git/drivers/infiniband/ulp/srp, branch dev-5.2

RDMA/srp: Accept again source addresses that do not have a port number

2019-07-26T07:11:04+00:00

commit bcef5b7215681250c4bf8961dfe15e9e4fef97d0 upstream. The function srp_parse_in() is used both for parsing source address specifications and for target address specifications. Target addresses must have a port number. Having to specify a port number for source addresses is inconvenient. Make sure that srp_parse_in() supports again parsing addresses with no port number. Cc: Fixes: c62adb7def71 ("IB/srp: Fix IPv6 address parsing") Signed-off-by: Bart Van Assche Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2019-06-07T16:25:27+00:00

Pull rdma fixes from Jason Gunthorpe: "Things are looking pretty quiet here in RDMA, not too many bug fixes rolling in right now. The usual driver bug fixes and fixes for a couple of regressions introduced in 5.2: - Fix a race on bootup with RDMA device renaming and srp. SRP also needs to rename its internal sys files - Fix a memory leak in hns - Don't leak resources in efa on certain error unwinds - Don't panic in certain error unwinds in ib_register_device - Various small user visible bug fix patches for the hfi and efa drivers - Fix the 32 bit compilation break" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/efa: Remove MAYEXEC flag check from mmap flow mlx5: avoid 64-bit division IB/hfi1: Validate page aligned for a given virtual address IB/{qib, hfi1, rdmavt}: Correct ibv_devinfo max_mr value IB/hfi1: Insure freeze_work work_struct is canceled on shutdown IB/rdmavt: Fix alloc_qpn() WARN_ON() RDMA/core: Fix panic when port_data isn't initialized RDMA/uverbs: Pass udata on uverbs error unwind RDMA/core: Clear out the udata before error unwind RDMA/hns: Fix PD memory leak for internal allocation RDMA/srp: Rename SRP sysfs name after IB device rename trigger

treewide: Add SPDX license identifier - Kbuild

2019-05-30T18:32:33+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0 Reported-by: Masahiro Yamada Signed-off-by: Greg Kroah-Hartman Reviewed-by: Kate Stewart Signed-off-by: Greg Kroah-Hartman

RDMA/srp: Rename SRP sysfs name after IB device rename trigger

2019-05-21T18:06:45+00:00

SRP logic used device name and port index as symlink to relevant kobject. If the IB device is renamed then the prior name will be re-used by the next device plugged in and sysfs will panic as SRP will try to re-use the same name. mlx5_ib: Mellanox Connect-IB Infiniband driver v5.0-0 sysfs: cannot create duplicate filename '/class/infiniband_srp/srp-mlx5_0-1' CPU: 3 PID: 1107 Comm: modprobe Not tainted 5.1.0-for-upstream-perf-2019-05-12_15-09-52-87 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0x5a/0x73 sysfs_warn_dup+0x58/0x70 sysfs_do_create_link_sd.isra.2+0xa3/0xb0 device_add+0x33f/0x660 srp_add_one+0x301/0x4f0 [ib_srp] add_client_context+0x99/0xe0 [ib_core] enable_device_and_get+0xd1/0x1b0 [ib_core] ib_register_device+0x533/0x710 [ib_core] ? mutex_lock+0xe/0x30 __mlx5_ib_add+0x23/0x70 [mlx5_ib] mlx5_add_device+0x4e/0xd0 [mlx5_core] mlx5_register_interface+0x85/0xc0 [mlx5_core] ? 0xffffffffa0791000 do_one_initcall+0x4b/0x1cb ? kmem_cache_alloc_trace+0xc6/0x1d0 ? do_init_module+0x22/0x21f do_init_module+0x5a/0x21f load_module+0x17f2/0x1ca0 ? m_show+0x1c0/0x1c0 __do_sys_finit_module+0x94/0xe0 do_syscall_64+0x48/0x120 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f157cce10d9 The module load/unload sequence was used to trigger such kernel panic: sudo modprobe ib_srp sudo modprobe -r mlx5_ib sudo modprobe -r mlx5_core sudo modprobe mlx5_core Have SRP track the name of the core device so that it can't have a name collision. Fixes: d21943dd19b5 ("RDMA/core: Implement IB device rename function") Signed-off-by: Leon Romanovsky Reviewed-by: Bart Van Assche Signed-off-by: Jason Gunthorpe

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2019-03-09T23:53:03+00:00

Pull rdma updates from Jason Gunthorpe: "This has been a slightly more active cycle than normal with ongoing core changes and quite a lot of collected driver updates. - Various driver fixes for bnxt_re, cxgb4, hns, mlx5, pvrdma, rxe - A new data transfer mode for HFI1 giving higher performance - Significant functional and bug fix update to the mlx5 On-Demand-Paging MR feature - A chip hang reset recovery system for hns - Change mm->pinned_vm to an atomic64 - Update bnxt_re to support a new 57500 chip - A sane netlink 'rdma link add' method for creating rxe devices and fixing the various unregistration race conditions in rxe's unregister flow - Allow lookup up objects by an ID over netlink - Various reworking of the core to driver interface: - drivers should not assume umem SGLs are in PAGE_SIZE chunks - ucontext is accessed via udata not other means - start to make the core code responsible for object memory allocation - drivers should convert struct device to struct ib_device via a helper - drivers have more tools to avoid use after unregister problems" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (280 commits) net/mlx5: ODP support for XRC transport is not enabled by default in FW IB/hfi1: Close race condition on user context disable and close RDMA/umem: Revert broken 'off by one' fix RDMA/umem: minor bug fix in error handling path RDMA/hns: Use GFP_ATOMIC in hns_roce_v2_modify_qp cxgb4: kfree mhp after the debug print IB/rdmavt: Fix concurrency panics in QP post_send and modify to error IB/rdmavt: Fix loopback send with invalidate ordering IB/iser: Fix dma_nents type definition IB/mlx5: Set correct write permissions for implicit ODP MR bnxt_re: Clean cq for kernel consumers only RDMA/uverbs: Don't do double free of allocated PD RDMA: Handle ucontext allocations by IB/core RDMA/core: Fix a WARN() message bnxt_re: fix the regression due to changes in alloc_pbl IB/mlx4: Increase the timeout for CM cache IB/core: Abort page fault handler silently during owning process exit IB/mlx5: Validate correct PD before prefetch MR IB/mlx5: Protect against prefetch of invalid MR RDMA/uverbs: Store PR pointer before it is overwritten ...

RDMA: Add and use rdma_for_each_port

2019-02-19T17:13:39+00:00

We have many loops iterating over all of the end port numbers on a struct ib_device, simplify them with a for_each helper. Reviewed-by: Parav Pandit Signed-off-by: Jason Gunthorpe

RDMA/srp: Rework SCSI device reset handling

2019-02-04T23:31:33+00:00

Since .scsi_done() must only be called after scsi_queue_rq() has finished, make sure that the SRP initiator driver does not call .scsi_done() while scsi_queue_rq() is in progress. Although invoking sg_reset -d while I/O is in progress works fine with kernel v4.20 and before, that is not the case with kernel v5.0-rc1. This patch avoids that the following crash is triggered with kernel v5.0-rc1: BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 CPU: 0 PID: 360 Comm: kworker/0:1H Tainted: G B 5.0.0-rc1-dbg+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:blk_mq_dispatch_rq_list+0x116/0xb10 Call Trace: blk_mq_sched_dispatch_requests+0x2f7/0x300 __blk_mq_run_hw_queue+0xd6/0x180 blk_mq_run_work_fn+0x27/0x30 process_one_work+0x4f1/0xa20 worker_thread+0x67/0x5b0 kthread+0x1cf/0x1f0 ret_from_fork+0x24/0x30 Cc: Fixes: 94a9174c630c ("IB/srp: reduce lock coverage of command completion") Signed-off-by: Bart Van Assche Signed-off-by: Jason Gunthorpe

IB/core: Remove ib_sg_dma_address() and ib_sg_dma_len()

2019-02-04T21:34:07+00:00

Keeping single line wrapper functions is not useful. Hence remove the ib_sg_dma_address() and ib_sg_dma_len() functions. This patch does not change any functionality. Signed-off-by: Bart Van Assche Signed-off-by: Jason Gunthorpe

RDMA/srp: Increase max_segment_size

2019-01-30T22:04:16+00:00

The default behavior of the SCSI core is to set the block layer request queue parameter max_segment_size to 64 KB. That means that elements of scatterlists are limited to 64 KB. Since RDMA adapters support larger sizes, increase max_segment_size for the SRP initiator. Notes: - The SCSI max_segment_size parameter was introduced in kernel v5.0. See also commit 50c2e9107f17 ("scsi: introduce a max_segment_size host_template parameters"). - Some other block drivers already set max_segment_size to UINT_MAX, e.g. nbd and rbd. Signed-off-by: Bart Van Assche Signed-off-by: Jason Gunthorpe