BMC/Intel-BMC/linux.git/drivers/infiniband/sw, branch dev-4.17

IB: Fix RDMA_RXE and INFINIBAND_RDMAVT dependencies for DMA_VIRT_OPS

2018-08-03T05:47:51+00:00

[ Upstream commit e02637e97d68a54b1527bc654bf8377eda310226 ] DMA_VIRT_OPS requires that dma_addr_t is at least as wide as a pointer, which is expressed as a dependency on !64BIT || ARCH_DMA_ADDR_T_64BIT. For parisc64 this is not true, and if these IB modules are enabled, kconfig warns: WARNING: unmet direct dependencies detected for DMA_VIRT_OPS Depends on [n]: HAS_DMA [=y] && (!64BIT [=y] || ARCH_DMA_ADDR_T_64BIT) Selected by [m]: - INFINIBAND_RDMAVT [=m] && INFINIBAND [=m] && 64BIT [=y] && PCI [=y] - RDMA_RXE [=m] && INET [=y] && PCI [=y] && INFINIBAND [=m] Add dependencies to fix this. Signed-off-by: Ben Hutchings Signed-off-by: Doug Ledford Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

IB/hfi1: Optimize kthread pointer locking when queuing CQ entries

2018-07-03T09:26:56+00:00

commit af8aab71370a692eaf7e7969ba5b1a455ac20113 upstream. All threads queuing CQ entries on different CQs are unnecessarily synchronized by a spin lock to check if the CQ kthread worker hasn't been destroyed before queuing an CQ entry. The lock used in 6efaf10f163d ("IB/rdmavt: Avoid queuing work into a destroyed cq kthread worker") is a device global lock and will have poor performance at scale as completions are entered from a large number of CPUs. Convert to use RCU where the read side of RCU is rvt_cq_enter() to determine that the worker is alive prior to triggering the completion event. Apply write side RCU semantics in rvt_driver_cq_init() and rvt_cq_exit(). Fixes: 6efaf10f163d ("IB/rdmavt: Avoid queuing work into a destroyed cq kthread worker") Cc: # 4.14.x Reviewed-by: Mike Marciniszyn Signed-off-by: Sebastian Sanchez Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford Signed-off-by: Greg Kroah-Hartman

nvmet,rxe: defer ip datagram sending to tasklet

2018-05-09T14:39:51+00:00

This addresses 3 separate problems: 1. When using NVME over Fabrics we may end up sending IP packets in interrupt context, we should defer this work to a tasklet. [ 50.939957] WARNING: CPU: 3 PID: 0 at kernel/softirq.c:161 __local_bh_enable_ip+0x1f/0xa0 [ 50.942602] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Tainted: G W 4.17.0-rc3-ARCH+ #104 [ 50.945466] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 [ 50.948163] RIP: 0010:__local_bh_enable_ip+0x1f/0xa0 [ 50.949631] RSP: 0018:ffff88009c183900 EFLAGS: 00010006 [ 50.951029] RAX: 0000000080010403 RBX: 0000000000000200 RCX: 0000000000000001 [ 50.952636] RDX: 0000000000000000 RSI: 0000000000000200 RDI: ffffffff817e04ec [ 50.954278] RBP: ffff88009c183910 R08: 0000000000000001 R09: 0000000000000614 [ 50.956000] R10: ffffea00021d5500 R11: 0000000000000001 R12: ffffffff817e04ec [ 50.957779] R13: 0000000000000000 R14: ffff88009566f400 R15: ffff8800956c7000 [ 50.959402] FS: 0000000000000000(0000) GS:ffff88009c180000(0000) knlGS:0000000000000000 [ 50.961552] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 50.963798] CR2: 000055c4ec0ccac0 CR3: 0000000002209001 CR4: 00000000000606e0 [ 50.966121] Call Trace: [ 50.966845] [ 50.967497] __dev_queue_xmit+0x62d/0x690 [ 50.968722] dev_queue_xmit+0x10/0x20 [ 50.969894] neigh_resolve_output+0x173/0x190 [ 50.971244] ip_finish_output2+0x2b8/0x370 [ 50.972527] ip_finish_output+0x1d2/0x220 [ 50.973785] ? ip_finish_output+0x1d2/0x220 [ 50.975010] ip_output+0xd4/0x100 [ 50.975903] ip_local_out+0x3b/0x50 [ 50.976823] rxe_send+0x74/0x120 [ 50.977702] rxe_requester+0xe3b/0x10b0 [ 50.978881] ? ip_local_deliver_finish+0xd1/0xe0 [ 50.980260] rxe_do_task+0x85/0x100 [ 50.981386] rxe_run_task+0x2f/0x40 [ 50.982470] rxe_post_send+0x51a/0x550 [ 50.983591] nvmet_rdma_queue_response+0x10a/0x170 [ 50.985024] __nvmet_req_complete+0x95/0xa0 [ 50.986287] nvmet_req_complete+0x15/0x60 [ 50.987469] nvmet_bio_done+0x2d/0x40 [ 50.988564] bio_endio+0x12c/0x140 [ 50.989654] blk_update_request+0x185/0x2a0 [ 50.990947] blk_mq_end_request+0x1e/0x80 [ 50.991997] nvme_complete_rq+0x1cc/0x1e0 [ 50.993171] nvme_pci_complete_rq+0x117/0x120 [ 50.994355] __blk_mq_complete_request+0x15e/0x180 [ 50.995988] blk_mq_complete_request+0x6f/0xa0 [ 50.997304] nvme_process_cq+0xe0/0x1b0 [ 50.998494] nvme_irq+0x28/0x50 [ 50.999572] __handle_irq_event_percpu+0xa2/0x1c0 [ 51.000986] handle_irq_event_percpu+0x32/0x80 [ 51.002356] handle_irq_event+0x3c/0x60 [ 51.003463] handle_edge_irq+0x1c9/0x200 [ 51.004473] handle_irq+0x23/0x30 [ 51.005363] do_IRQ+0x46/0xd0 [ 51.006182] common_interrupt+0xf/0xf [ 51.007129] 2. Work must always be offloaded to tasklet for rxe_post_send_kernel() when using NVMEoF in order to solve lock ordering between neigh->ha_lock seqlock and the nvme queue lock: [ 77.833783] Possible interrupt unsafe locking scenario: [ 77.833783] [ 77.835831] CPU0 CPU1 [ 77.837129] ---- ---- [ 77.838313] lock(&(&n->ha_lock)->seqcount); [ 77.839550] local_irq_disable(); [ 77.841377] lock(&(&nvmeq->q_lock)->rlock); [ 77.843222] lock(&(&n->ha_lock)->seqcount); [ 77.845178] [ 77.846298] lock(&(&nvmeq->q_lock)->rlock); [ 77.847986] [ 77.847986] *** DEADLOCK *** 3. Same goes for the lock ordering between sch->q.lock and nvme queue lock: [ 47.634271] Possible interrupt unsafe locking scenario: [ 47.634271] [ 47.636452] CPU0 CPU1 [ 47.637861] ---- ---- [ 47.639285] lock(&(&sch->q.lock)->rlock); [ 47.640654] local_irq_disable(); [ 47.642451] lock(&(&nvmeq->q_lock)->rlock); [ 47.644521] lock(&(&sch->q.lock)->rlock); [ 47.646480] [ 47.647263] lock(&(&nvmeq->q_lock)->rlock); [ 47.648492] [ 47.648492] *** DEADLOCK *** Using NVMEoF after this patch seems to finally be stable, without it, rxe eventually deadlocks the whole system and causes RCU stalls. Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com> Reviewed-by: Zhu Yanjun Signed-off-by: Doug Ledford

IB/rxe: avoid double kfree_skb

2018-04-27T18:20:47+00:00

When skb is sent, it will pass the following functions in soft roce. rxe_send [rdma_rxe] ip_local_out __ip_local_out ip_output ip_finish_output ip_finish_output2 dev_queue_xmit __dev_queue_xmit dev_hard_start_xmit In the above functions, if error occurs in the above functions or iptables rules drop skb after ip_local_out, kfree_skb will be called. So it is not necessary to call kfree_skb in soft roce module again. Or else crash will occur. The steps to reproduce: server client --------- --------- |1.1.1.1|<----rxe-channel--->|1.1.1.2| --------- --------- On server: rping -s -a 1.1.1.1 -v -C 10000 -S 512 On client: rping -c -a 1.1.1.1 -v -C 10000 -S 512 The kernel configs CONFIG_DEBUG_KMEMLEAK and CONFIG_DEBUG_OBJECTS are enabled on both server and client. When rping runs, run the following command in server: iptables -I OUTPUT -p udp --dport 4791 -j DROP Without this patch, crash will occur. CC: Srinivas Eeda CC: Junxiao Bi Signed-off-by: Zhu Yanjun Reviewed-by: Yuval Shaia Signed-off-by: Doug Ledford

IB/rxe: add RXE_START_MASK for rxe_opcode IB_OPCODE_RC_SEND_ONLY_INV

2018-04-27T18:20:47+00:00

w/o RXE_START_MASK, the last_psn of IB_OPCODE_RC_SEND_ONLY_INV will not be updated in update_wqe_psn, and the corresponding wqe will not be acked in rxe_completer due to its last_psn is zero. Finally, the other wqe will also not be able to be acked, because the wqe of IB_OPCODE_RC_SEND_ONLY_INV with last_psn 0 is still there. This causes large amount of io timeout when nvmeof is over rxe. Add RXE_START_MASK for IB_OPCODE_RC_SEND_ONLY_INV to fix this. Signed-off-by: Jianchao Wang Reviewed-by: Zhu Yanjun Signed-off-by: Doug Ledford

IB/rxe: Fix for oops in rxe_register_device on ppc64le arch

2018-04-05T19:04:50+00:00

On ppc64le arch rxe_add command causes oops in kernel log: [ 92.495140] Oops: Kernel access of bad area, sig: 11 [#1] [ 92.499710] SMP NR_CPUS=2048 NUMA pSeries [ 92.499792] Modules linked in: ipt_MASQUERADE(E) nf_nat_masquerade_ipv4(E) nf_conntrack_netlink(E) nfnetlink(E) xfrm_user(E) iptable _nat(E) nf_conntrack_ipv4(E) nf_defrag_ipv4(E) nf_nat_ipv4(E) xt_addrtype(E) iptable_filter(E) ip_tables(E) xt_conntrack(E) x_tables(E) nf_nat(E) nf_conntrack(E) br_netfilter(E) bridge(E) stp(E) llc(E) overlay(E) af_packet(E) rpcrdma(E) ib_isert(E) iscsi_target_mod(E) i b_iser(E) libiscsi(E) ib_srpt(E) target_core_mod(E) ib_srp(E) ib_ipoib(E) rdma_ucm(E) ib_ucm(E) ib_uverbs(E) ib_umad(E) bochs_drm(E) tt m(E) drm_kms_helper(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) fb_sys_fops(E) drm(E) agpgart(E) virtio_rng(E) virtio_console(E) rtc_ generic(E) dm_ec(OEN) ttln_rdma(OEN) rdma_cm(E) configfs(E) iw_cm(E) ib_cm(E) rdma_rxe(E) ip6_udp_tunnel(E) udp_tunnel(E) ib_core(E) ql a2xxx(E) [ 92.499832] scsi_transport_fc(E) nvme_fc(E) nvme_fabrics(E) nvme_core(E) ipmi_watchdog(E) ipmi_ssif(E) ipmi_poweroff(E) ipmi_powernv(EX) ipmi_devintf(E) ipmi_msghandler(E) dummy(E) ext4(E) crc16(E) jbd2(E) mbcache(E) dm_service_time(E) scsi_transport_iscsi(E) sd_mod(E) sr_mod(E) cdrom(E) hid_generic(E) usbhid(E) virtio_blk(E) virtio_scsi(E) virtio_net(E) ibmvscsi(EX) scsi_transport_srp(E) xhci_pci(E) xhci_hcd(E) usbcore(E) usb_common(E) virtio_pci(E) virtio_ring(E) virtio(E) sunrpc(E) dm_mirror(E) dm_region_hash(E) dm_log(E) sg(E) dm_multipath(E) dm_mod(E) scsi_dh_rdac(E) scsi_dh_emc(E) scsi_dh_alua(E) scsi_mod(E) autofs4(E) [ 92.499834] Supported: No, Unsupported modules are loaded [ 92.499839] CPU: 3 PID: 5576 Comm: sh Tainted: G OE NX 4.4.120-ttln.17-default #1 [ 92.499841] task: c0000000afe8a490 ti: c0000000beba8000 task.ti: c0000000beba8000 [ 92.499842] NIP: c00000000008ba3c LR: c000000000027644 CTR: c00000000008ba10 [ 92.499844] REGS: c0000000bebab750 TRAP: 0300 Tainted: G OE NX (4.4.120-ttln.17-default) [ 92.499850] MSR: 8000000000009033 CR: 28424428 XER: 20000000 [ 92.499871] CFAR: 0000000000002424 DAR: 0000000000000208 DSISR: 40000000 SOFTE: 1 GPR00: c000000000027644 c0000000bebab9d0 c000000000f09700 0000000000000000 GPR04: d0000000043d7192 0000000000000002 000000000000001a fffffffffffffffe GPR08: 000000000000009c c00000000008ba10 d0000000043e5848 d0000000043d3828 GPR12: c00000000008ba10 c000000007a02400 0000000010062e38 0000010020388860 GPR16: 0000000000000000 0000000000000000 00000100203885f0 00000000100f6c98 GPR20: c0000000b3f1fcc0 c0000000b3f1fc48 c0000000b3f1fbd0 c0000000b3f1fb58 GPR24: c0000000b3f1fae0 c0000000b3f1fa68 00000000000005dc c0000000b3f1f9f0 GPR28: d0000000043e5848 c0000000b3f1f900 c0000000b3f1f320 c0000000b3f1f000 [ 92.499881] NIP [c00000000008ba3c] dma_get_required_mask_pSeriesLP+0x2c/0x1a0 [ 92.499885] LR [c000000000027644] dma_get_required_mask+0x44/0xac [ 92.499886] Call Trace: [ 92.499891] [c0000000bebab9d0] [c0000000bebaba30] 0xc0000000bebaba30 (unreliable) [ 92.499894] [c0000000bebaba10] [c000000000027644] dma_get_required_mask+0x44/0xac [ 92.499904] [c0000000bebaba30] [d0000000043cb4b4] rxe_register_device+0xc4/0x430 [rdma_rxe] [ 92.499910] [c0000000bebabab0] [d0000000043c06c8] rxe_add+0x448/0x4e0 [rdma_rxe] [ 92.499915] [c0000000bebabb30] [d0000000043d28dc] rxe_net_add+0x4c/0xf0 [rdma_rxe] [ 92.499921] [c0000000bebabb60] [d0000000043d305c] rxe_param_set_add+0x6c/0x1ac [rdma_rxe] [ 92.499924] [c0000000bebabbf0] [c0000000000e78c0] param_attr_store+0xa0/0x180 [ 92.499927] [c0000000bebabc70] [c0000000000e6448] module_attr_store+0x48/0x70 [ 92.499932] [c0000000bebabc90] [c000000000391f60] sysfs_kf_write+0x70/0xb0 [ 92.499935] [c0000000bebabcb0] [c000000000390f1c] kernfs_fop_write+0x18c/0x1e0 [ 92.499939] [c0000000bebabd00] [c0000000002e22ac] __vfs_write+0x4c/0x1d0 [ 92.499942] [c0000000bebabd90] [c0000000002e2f94] vfs_write+0xc4/0x200 [ 92.499945] [c0000000bebabde0] [c0000000002e488c] SyS_write+0x6c/0x110 [ 92.499948] [c0000000bebabe30] [c000000000009384] system_call+0x38/0xe4 [ 92.499949] Instruction dump: [ 92.499954] 4e800020 3c4c00e8 3842dcf0 7c0802a6 f8010010 60000000 7c0802a6 fba1ffe8 [ 92.499958] fbc1fff0 fbe1fff8 f8010010 f821ffc1 7c7e1b78 2fa90000 419e0078 [ 92.499962] ---[ end trace bed077e15eb420cf ]--- It fails in dma_get_required_mask, that has ppc-specific implementation, and fail if provided device argument is NULL Signed-off-by: Mikhail Malygin Reviewed-by: Yonatan Cohen Signed-off-by: Jason Gunthorpe

IB/rxe: Removed GID add/del dummy routines

2018-04-05T16:15:33+00:00

rxe driver's add_gid() and del_gid() callbacks are doing simple checks which are already done by the ib core before invoking these callback routines. Therefore, code is simplified to skip implementing add_gid() and del_gid() callback functions. They are only invoked by ib_core if they are implemented. Signed-off-by: Parav Pandit Reviewed-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

RDMA: Use ib_gid_attr during GID modification

2018-04-04T03:34:16+00:00

Now that ib_gid_attr contains device, port and index, simplify the provider APIs add_gid() and del_gid() to use device, port and index fields from the ib_gid_attr attributes structure. Signed-off-by: Parav Pandit Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

IB/providers: Avoid null netdev check for RoCE

2018-04-04T03:33:51+00:00

Now that IB core GID cache ensures that all RoCE entries have an associated netdev remove null checks from the provider drivers for clarity. Reviewed-by: Mark Bloch Signed-off-by: Parav Pandit Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

RDMA/providers: Simplify query_gid callback of RoCE providers

2018-04-04T03:33:47+00:00

ib_query_gid() fetches the GID from the software cache maintained in ib_core for RoCE ports. Therefore, simplify the provider drivers for RoCE to treat query_gid() callback as never called for RoCE, and only require non-RoCE devices to implement it. Signed-off-by: Parav Pandit Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe