BMC/Intel-BMC/linux.git/drivers/infiniband/core, branch v4.2

IB/core: Destroy multcast_idr on module exit

2015-07-14T17:20:15+00:00

Destroy multcast_idr on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez ) @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } Signed-off-by: Johannes Thumshirn Signed-off-by: Doug Ledford

IB/ucm: Fix bitmap wrap when devnum > IB_UCM_MAX_DEVICES

2015-07-14T17:20:12+00:00

ib_ucm_release_dev clears the wrong bit if devnum is greater than IB_UCM_MAX_DEVICES. Signed-off-by: Carol L Soto Signed-off-by: Doug Ledford

IB/ucma: Fix lockdep warning in ucma_lock_files

2015-07-14T17:20:12+00:00

The ucma_lock_files() locks the mut mutex on two files, e.g. for migrating an ID. Use mutex_lock_nested() to prevent the warning below. ============================================= [ INFO: possible recursive locking detected ] 4.1.0-rc6-hmm+ #40 Tainted: G O --------------------------------------------- pingpong_rpc_se/10260 is trying to acquire lock: (&file->mut){+.+.+.}, at: [] ucma_migrate_id+0xc5/0x248 [rdma_ucm] but task is already holding lock: (&file->mut){+.+.+.}, at: [] ucma_migrate_id+0xbb/0x248 [rdma_ucm] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&file->mut); lock(&file->mut); *** DEADLOCK *** May be due to missing lock nesting notation 1 lock held by pingpong_rpc_se/10260: #0: (&file->mut){+.+.+.}, at: [] ucma_migrate_id+0xbb/0x248 [rdma_ucm] stack backtrace: CPU: 0 PID: 10260 Comm: pingpong_rpc_se Tainted: G O 4.1.0-rc6-hmm+ #40 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 ffff8801f85b63d0 ffff880195677b58 ffffffff81668f49 0000000000000001 ffffffff825cbbe0 ffff880195677c38 ffffffff810bb991 ffff880100000000 ffff880100000000 ffff880100000001 ffff8801f85b7010 ffffffff8121bee9 Call Trace: [] dump_stack+0x4f/0x6e [] __lock_acquire+0x741/0x1820 [] ? dput+0x29/0x320 [] lock_acquire+0xc8/0x240 [] ? ucma_migrate_id+0xc5/0x248 [rdma_ucm] [] ? mutex_lock_nested+0x291/0x3e0 [] mutex_lock_nested+0x65/0x3e0 [] ? ucma_migrate_id+0xc5/0x248 [rdma_ucm] [] ? trace_hardirqs_on+0xd/0x10 [] ? mutex_unlock+0xe/0x10 [] ucma_migrate_id+0xc5/0x248 [rdma_ucm] [] ucma_write+0xa4/0xb0 [rdma_ucm] [] __vfs_write+0x34/0x100 [] ? __audit_syscall_entry+0xac/0x110 [] ? current_kernel_time+0xc5/0xe0 [] ? security_file_permission+0x23/0x90 [] ? rw_verify_area+0x5d/0xe0 [] vfs_write+0xab/0x120 [] SyS_write+0x59/0xd0 [] ? __audit_syscall_entry+0xac/0x110 [] system_call_fastpath+0x12/0x76 Signed-off-by: Haggai Eran Signed-off-by: Doug Ledford

RDMA/core: Fixes for port mapper client registration

2015-07-14T17:20:10+00:00

Fixes to allow clients to make remove mapping requests, after they have provided the user space service with the mapping information, they are using when the service is restarted. 1) Adding IWPM_REG_VALID, IWPM_REG_INCOMPL and IWPM_REG_UNDEF registration types for the port mapper clients and functions to set/check the registration type. 2) If the port mapper user space service is not available to register the client, then its registration stays IWPM_REG_UNDEF and the registration isn't checked until the service becomes available (no mappings are possible, if the user space service isn't running). 3) After the service is restarted, the user space port mapper pid is set to valid and the client registration is set to IWPM_REG_INCOMPL to allow the client to make remove mapping requests. Signed-off-by: Tatyana Nikolova Reviewed-by: Steve Wise Tested-by: Steve Wise Signed-off-by: Doug Ledford

IB/cm: Do not queue work to a device that's going away

2015-07-14T17:20:09+00:00

Whenever ib_cm gets remove_one call, like when there is a hot-unplug event, the driver should mark itself as going_down and confirm that no new works are going to be queued for that device. so, the order of the actions are: 1. mark the going_down bit. 2. flush the wq. 3. [make sure no new works for that device.] 4. unregister mad agent. otherwise, works that are already queued can be scheduled after the mad agent was freed. Signed-off-by: Erez Shitrit Signed-off-by: Doug Ledford

IB/mad: Fix compare between big endian and cpu endian

2015-07-14T17:20:08+00:00

The define OPA_LID_PERMISSIVE is big endian and was compared to the cpu endian variable opa_drslid. Problem caught by 0-day build infrastructure. Fixes: 8e4349d13f33 (IB/mad: Add final OPA MAD processing) Signed-off-by: Ira Weiny Reviewed-by: Mike Marciniszyn Reviewed-by: John, Jubin Signed-off-by: Doug Ledford

IB: Add rdma_cap_ib_switch helper and use where appropriate

2015-07-14T17:20:08+00:00

Persuant to Liran's comments on node_type on linux-rdma mailing list: In an effort to reform the RDMA core and ULPs to minimize use of node_type in struct ib_device, an additional bit is added to struct ib_device for is_switch (IB switch). This is needed to be initialized by any IB switch device driver. This is a NEW requirement on such device drivers which are all "out of tree". In addition, an ib_switch helper was added to ib_verbs.h based on the is_switch device bit rather than node_type (although those should be consistent). The RDMA core (MAD, SMI, agent, sa_query, multicast, sysfs) as well as (IPoIB and SRP) ULPs are updated where appropriate to use this new helper. In some cases, the helper is now used under the covers of using rdma_[start end]_port rather than the open coding previously used. Reviewed-by: Sean Hefty Reviewed-By: Jason Gunthorpe Reviewed-by: Ira Weiny Tested-by: Ira Weiny Signed-off-by: Hal Rosenstock Signed-off-by: Doug Ledford

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

2015-06-23T22:53:26+00:00

Pull rdma updates from Doug Ledford: - a large cleanup of how device capabilities are checked for various features - additional cleanups in the MAD processing - update to the srp driver - creation and use of centralized log message helpers - add const to a number of args to calls and clean up call chain - add support for extended cq create verb - add support for timestamps on cq completion - add support for processing OPA MAD packets * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (92 commits) IB/mad: Add final OPA MAD processing IB/mad: Add partial Intel OPA MAD support IB/mad: Add partial Intel OPA MAD support IB/core: Add OPA MAD core capability flag IB/mad: Add support for additional MAD info to/from drivers IB/mad: Convert allocations from kmem_cache to kzalloc IB/core: Add ability for drivers to report an alternate MAD size. IB/mad: Support alternate Base Versions when creating MADs IB/mad: Create a generic helper for DR forwarding checks IB/mad: Create a generic helper for DR SMP Recv processing IB/mad: Create a generic helper for DR SMP Send processing IB/mad: Split IB SMI handling from MAD Recv handler IB/mad cleanup: Generalize processing of MAD data IB/mad cleanup: Clean up function params -- find_mad_agent IB/mlx4: Add support for CQ time-stamping IB/mlx4: Add mmap call to map the hardware clock IB/core: Pass hardware specific data in query_device IB/core: Add timestamp_mask and hca_core_clock to query_device IB/core: Extend ib_uverbs_create_cq IB/core: Add CQ creation time-stamping flag ...

IB/mad: Add final OPA MAD processing

2015-06-12T18:49:18+00:00

For devices which support OPA MADs 1) Use previously defined SMP support functions. 2) Pass correct base version to ib_create_send_mad when processing OPA MADs. 3) Process out_mad_key_index returned by agents for a response. This is necessary because OPA SMP packets must carry a valid pkey. 4) Carry the correct segment size (OPA vs IBTA) of RMPP messages within ib_mad_recv_wc. 5) Handle variable length OPA MADs by: * Adjusting the 'fake' WC for locally routed SMP's to represent the proper incoming byte_len * out_mad_size is used from the local HCA agents 1) when sending agent responses on the wire 2) when passing responses through the local_completions function NOTE: wc.byte_len includes the GRH length and therefore is different from the in_mad_size specified to the local HCA agents. out_mad_size should _not_ include the GRH length as it is added Signed-off-by: Ira Weiny Signed-off-by: Doug Ledford

IB/mad: Add partial Intel OPA MAD support

2015-06-12T18:49:17+00:00

Add OPA SMP processing functionality. Define the new OPA SMP format, create support functions for this format using the previously defined helper functions as appropriate. These functions are defined in this patch and used in the final OPA MAD support patch. Signed-off-by: Ira Weiny Signed-off-by: Doug Ledford