BMC/Intel-BMC/linux.git/drivers/infiniband/core, branch dev-5.2

RDMA/cma: fix null-ptr-deref Read in cma_cleanup

2019-09-10T09:35:21+00:00

[ Upstream commit a7bfb93f0211b4a2f1ffeeb259ed6206bac30460 ] In cma_init, if cma_configfs_init fails, need to free the previously memory and return fail, otherwise will trigger null-ptr-deref Read in cma_cleanup. cma_cleanup cma_configfs_exit configfs_unregister_subsystem Fixes: 045959db65c6 ("IB/cma: Add configfs for rdma_cm") Reported-by: Hulk Robot Signed-off-by: zhengbin Reviewed-by: Parav Pandit Link: https://lore.kernel.org/r/1566188859-103051-1-git-send-email-zhengbin13@huawei.com Signed-off-by: Doug Ledford Signed-off-by: Sasha Levin

IB/mlx5: Fix implicit MR release flow

2019-09-06T08:23:17+00:00

[ Upstream commit f591822c3cf314442819486f45ff7dc1f690e0c0 ] Once implicit MR is being called to be released by ib_umem_notifier_release() its leaves were marked as "dying". However, when dereg_mr()->mlx5_ib_free_implicit_mr()->mr_leaf_free() is called, it skips running the mr_leaf_free_action (i.e. umem_odp->work) when those leaves were marked as "dying". As such ib_umem_release() for the leaves won't be called and their MRs will be leaked as well. When an application exits/killed without calling dereg_mr we might hit the above flow. This fatal scenario is reported by WARN_ON() upon mlx5_ib_dealloc_ucontext() as ibcontext->per_mm_list is not empty, the call trace can be seen below. Originally the "dying" mark as part of ib_umem_notifier_release() was introduced to prevent pagefault_mr() from returning a success response once this happened. However, we already have today the completion mechanism so no need for that in those flows any more. Even in case a success response will be returned the firmware will not find the pages and an error will be returned in the following call as a released mm will cause ib_umem_odp_map_dma_pages() to permanently fail mmget_not_zero(). Fix the above issue by dropping the "dying" from the above flows. The other flows that are using "dying" are still needed it for their synchronization purposes. WARNING: CPU: 1 PID: 7218 at drivers/infiniband/hw/mlx5/main.c:2004 mlx5_ib_dealloc_ucontext+0x84/0x90 [mlx5_ib] CPU: 1 PID: 7218 Comm: ibv_rc_pingpong Tainted: G E 5.2.0-rc6+ #13 Call Trace: uverbs_destroy_ufile_hw+0xb5/0x120 [ib_uverbs] ib_uverbs_close+0x1f/0x80 [ib_uverbs] __fput+0xbe/0x250 task_work_run+0x88/0xa0 do_exit+0x2cb/0xc30 ? __fput+0x14b/0x250 do_group_exit+0x39/0xb0 get_signal+0x191/0x920 ? _raw_spin_unlock_bh+0xa/0x20 ? inet_csk_accept+0x229/0x2f0 do_signal+0x36/0x5e0 ? put_unused_fd+0x5b/0x70 ? __sys_accept4+0x1a6/0x1e0 ? inet_hash+0x35/0x40 ? release_sock+0x43/0x90 ? _raw_spin_unlock_bh+0xa/0x20 ? inet_listen+0x9f/0x120 exit_to_usermode_loop+0x5c/0xc6 do_syscall_64+0x182/0x1b0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 81713d3788d2 ("IB/mlx5: Add implicit MR support") Link: https://lore.kernel.org/r/20190805083010.21777-1-leon@kernel.org Signed-off-by: Yishai Hadas Reviewed-by: Artemy Kovalyov Signed-off-by: Leon Romanovsky Reviewed-by: Jason Gunthorpe Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin

IB/mad: Fix use-after-free in ib mad completion handling

2019-08-25T14:10:32+00:00

[ Upstream commit 770b7d96cfff6a8bf6c9f261ba6f135dc9edf484 ] We encountered a use-after-free bug when unloading the driver: [ 3562.116059] BUG: KASAN: use-after-free in ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.117233] Read of size 4 at addr ffff8882ca5aa868 by task kworker/u13:2/23862 [ 3562.118385] [ 3562.119519] CPU: 2 PID: 23862 Comm: kworker/u13:2 Tainted: G OE 5.1.0-for-upstream-dbg-2019-05-19_16-44-30-13 #1 [ 3562.121806] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 3562.123075] Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core] [ 3562.124383] Call Trace: [ 3562.125640] dump_stack+0x9a/0xeb [ 3562.126911] print_address_description+0xe3/0x2e0 [ 3562.128223] ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.129545] __kasan_report+0x15c/0x1df [ 3562.130866] ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.132174] kasan_report+0xe/0x20 [ 3562.133514] ib_mad_post_receive_mads+0xddc/0xed0 [ib_core] [ 3562.134835] ? find_mad_agent+0xa00/0xa00 [ib_core] [ 3562.136158] ? qlist_free_all+0x51/0xb0 [ 3562.137498] ? mlx4_ib_sqp_comp_worker+0x1970/0x1970 [mlx4_ib] [ 3562.138833] ? quarantine_reduce+0x1fa/0x270 [ 3562.140171] ? kasan_unpoison_shadow+0x30/0x40 [ 3562.141522] ib_mad_recv_done+0xdf6/0x3000 [ib_core] [ 3562.142880] ? _raw_spin_unlock_irqrestore+0x46/0x70 [ 3562.144277] ? ib_mad_send_done+0x1810/0x1810 [ib_core] [ 3562.145649] ? mlx4_ib_destroy_cq+0x2a0/0x2a0 [mlx4_ib] [ 3562.147008] ? _raw_spin_unlock_irqrestore+0x46/0x70 [ 3562.148380] ? debug_object_deactivate+0x2b9/0x4a0 [ 3562.149814] __ib_process_cq+0xe2/0x1d0 [ib_core] [ 3562.151195] ib_cq_poll_work+0x45/0xf0 [ib_core] [ 3562.152577] process_one_work+0x90c/0x1860 [ 3562.153959] ? pwq_dec_nr_in_flight+0x320/0x320 [ 3562.155320] worker_thread+0x87/0xbb0 [ 3562.156687] ? __kthread_parkme+0xb6/0x180 [ 3562.158058] ? process_one_work+0x1860/0x1860 [ 3562.159429] kthread+0x320/0x3e0 [ 3562.161391] ? kthread_park+0x120/0x120 [ 3562.162744] ret_from_fork+0x24/0x30 ... [ 3562.187615] Freed by task 31682: [ 3562.188602] save_stack+0x19/0x80 [ 3562.189586] __kasan_slab_free+0x11d/0x160 [ 3562.190571] kfree+0xf5/0x2f0 [ 3562.191552] ib_mad_port_close+0x200/0x380 [ib_core] [ 3562.192538] ib_mad_remove_device+0xf0/0x230 [ib_core] [ 3562.193538] remove_client_context+0xa6/0xe0 [ib_core] [ 3562.194514] disable_device+0x14e/0x260 [ib_core] [ 3562.195488] __ib_unregister_device+0x79/0x150 [ib_core] [ 3562.196462] ib_unregister_device+0x21/0x30 [ib_core] [ 3562.197439] mlx4_ib_remove+0x162/0x690 [mlx4_ib] [ 3562.198408] mlx4_remove_device+0x204/0x2c0 [mlx4_core] [ 3562.199381] mlx4_unregister_interface+0x49/0x1d0 [mlx4_core] [ 3562.200356] mlx4_ib_cleanup+0xc/0x1d [mlx4_ib] [ 3562.201329] __x64_sys_delete_module+0x2d2/0x400 [ 3562.202288] do_syscall_64+0x95/0x470 [ 3562.203277] entry_SYSCALL_64_after_hwframe+0x49/0xbe The problem was that the MAD PD was deallocated before the MAD CQ. There was completion work pending for the CQ when the PD got deallocated. When the mad completion handling reached procedure ib_mad_post_receive_mads(), we got a use-after-free bug in the following line of code in that procedure: sg_list.lkey = qp_info->port_priv->pd->local_dma_lkey; (the pd pointer in the above line is no longer valid, because the pd has been deallocated). We fix this by allocating the PD before the CQ in procedure ib_mad_port_open(), and deallocating the PD after freeing the CQ in procedure ib_mad_port_close(). Since the CQ completion work queue is flushed during ib_free_cq(), no completions will be pending for that CQ when the PD is later deallocated. Note that freeing the CQ before deallocating the PD is the practice in the ULPs. Fixes: 4be90bc60df4 ("IB/mad: Remove ib_get_dma_mr calls") Signed-off-by: Jack Morgenstein Signed-off-by: Leon Romanovsky Link: https://lore.kernel.org/r/20190801121449.24973-1-leon@kernel.org Signed-off-by: Doug Ledford Signed-off-by: Sasha Levin

RDMA/restrack: Track driver QP types in resource tracker

2019-08-25T14:10:32+00:00

[ Upstream commit 52e0a118a20308dd6aa531e20a5ab5907d2264c8 ] The check for QP type different than XRC has excluded driver QP types from the resource tracker. As a result, "rdma resource show" user command would not show opened driver QPs which does not reflect the real state of the system. Check QP type explicitly instead of assuming enum values/ordering. Fixes: 40909f664d27 ("RDMA/efa: Add EFA verbs implementation") Signed-off-by: Gal Pressman Reviewed-by: Leon Romanovsky Link: https://lore.kernel.org/r/20190801104354.11417-1-galpress@amazon.com Signed-off-by: Doug Ledford Signed-off-by: Sasha Levin

IB/core: Add mitigation for Spectre V1

2019-08-25T14:10:32+00:00

[ Upstream commit 61f259821dd3306e49b7d42a3f90fb5a4ff3351b ] Some processors may mispredict an array bounds check and speculatively access memory that they should not. With a user supplied array index we like to play things safe by masking the value with the array size before it is used as an index. Signed-off-by: Tony Luck Link: https://lore.kernel.org/r/20190731043957.GA1600@agluck-desk2.amr.corp.intel.com Signed-off-by: Doug Ledford Signed-off-by: Sasha Levin

RDMA/devices: Do not deadlock during client removal

2019-08-06T17:08:20+00:00

commit 621e55ff5b8e0ab5d1063f0eae0ef3960bef8f6e upstream. lockdep reports: WARNING: possible circular locking dependency detected modprobe/302 is trying to acquire lock: 0000000007c8919c ((wq_completion)ib_cm){+.+.}, at: flush_workqueue+0xdf/0x990 but task is already holding lock: 000000002d3d2ca9 (&device->client_data_rwsem){++++}, at: remove_client_context+0x79/0xd0 [ib_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&device->client_data_rwsem){++++}: down_read+0x3f/0x160 ib_get_net_dev_by_params+0xd5/0x200 [ib_core] cma_ib_req_handler+0x5f6/0x2090 [rdma_cm] cm_process_work+0x29/0x110 [ib_cm] cm_req_handler+0x10f5/0x1c00 [ib_cm] cm_work_handler+0x54c/0x311d [ib_cm] process_one_work+0x4aa/0xa30 worker_thread+0x62/0x5b0 kthread+0x1ca/0x1f0 ret_from_fork+0x24/0x30 -> #1 ((work_completion)(&(&work->work)->work)){+.+.}: process_one_work+0x45f/0xa30 worker_thread+0x62/0x5b0 kthread+0x1ca/0x1f0 ret_from_fork+0x24/0x30 -> #0 ((wq_completion)ib_cm){+.+.}: lock_acquire+0xc8/0x1d0 flush_workqueue+0x102/0x990 cm_remove_one+0x30e/0x3c0 [ib_cm] remove_client_context+0x94/0xd0 [ib_core] disable_device+0x10a/0x1f0 [ib_core] __ib_unregister_device+0x5a/0xe0 [ib_core] ib_unregister_device+0x21/0x30 [ib_core] mlx5_ib_stage_ib_reg_cleanup+0x9/0x10 [mlx5_ib] __mlx5_ib_remove+0x3d/0x70 [mlx5_ib] mlx5_ib_remove+0x12e/0x140 [mlx5_ib] mlx5_remove_device+0x144/0x150 [mlx5_core] mlx5_unregister_interface+0x3f/0xf0 [mlx5_core] mlx5_ib_cleanup+0x10/0x3a [mlx5_ib] __x64_sys_delete_module+0x227/0x350 do_syscall_64+0xc3/0x6a4 entry_SYSCALL_64_after_hwframe+0x49/0xbe Which is due to the read side of the client_data_rwsem being obtained recursively through a work queue flush during cm client removal. The lock is being held across the remove in remove_client_context() so that the function is a fence, once it returns the client is removed. This is required so that the two callers do not proceed with destruction until the client completes removal. Instead of using client_data_rwsem use the existing device unregistration refcount and add a similar client unregistration (client->uses) refcount. This will fence the two unregistration paths without holding any locks. Cc: Fixes: 921eab1143aa ("RDMA/devices: Re-organize device.c locking") Signed-off-by: Jason Gunthorpe Signed-off-by: Leon Romanovsky Link: https://lore.kernel.org/r/20190731081841.32345-2-leon@kernel.org Signed-off-by: Doug Ledford Signed-off-by: Greg Kroah-Hartman

RDMA/core: Fix race when resolving IP address

2019-07-31T05:24:50+00:00

[ Upstream commit d8d9ec7dc5abbb3f11d866e983c4984f5c2de9d6 ] Use the neighbour lock when copying the MAC address from the neighbour data struct in dst_fetch_ha. When not using the lock, it is possible for the function to race with neigh_update(), causing it to copy an torn MAC address: rdma_resolve_addr() rdma_resolve_ip() addr_resolve() addr_resolve_neigh() fetch_ha() dst_fetch_ha() memcpy(dev_addr->dst_dev_addr, n->ha, MAX_ADDR_LEN) and net_ioctl() arp_ioctl() arp_rec_delete() arp_invalidate() neigh_update() __neigh_update() memcpy(&neigh->ha, lladdr, dev->addr_len) It is possible to provoke this error by calling rdma_resolve_addr() in a tight loop, while deleting the corresponding ARP entry in another tight loop. Fixes: 51d45974515c ("infiniband: addr: Consolidate code to fetch neighbour hardware address from dst.") Signed-off-by: Dag Moxnes Signed-off-by: Håkon Bugge Reviewed-by: Jason Gunthorpe Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin

RDMA/odp: Fix missed unlock in non-blocking invalidate_start

2019-07-26T07:11:04+00:00

commit 7608bf40cf2480057ec0da31456cc428791c32ef upstream. If invalidate_start returns with EAGAIN then the umem_rwsem needs to be unlocked as no invalidate_end will be called. Cc: Fixes: ca748c39ea3f ("RDMA/umem: Get rid of per_mm->notifier_count") Signed-off-by: Jason Gunthorpe Reviewed-by: Leon Romanovsky Signed-off-by: Doug Ledford Signed-off-by: Greg Kroah-Hartman

Merge tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2019-06-08T19:52:42+00:00

Pull yet more SPDX updates from Greg KH: "Another round of SPDX header file fixes for 5.2-rc4 These are all more "GPL-2.0-or-later" or "GPL-2.0-only" tags being added, based on the text in the files. We are slowly chipping away at the 700+ different ways people tried to write the license text. All of these were reviewed on the spdx mailing list by a number of different people. We now have over 60% of the kernel files covered with SPDX tags: $ ./scripts/spdxcheck.py -v 2>&1 | grep Files Files checked: 64533 Files with SPDX: 40392 Files with errors: 0 I think the majority of the "easy" fixups are now done, it's now the start of the longer-tail of crazy variants to wade through" * tag 'spdx-5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (159 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 450 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 449 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 448 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 445 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 444 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 443 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 442 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 440 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 438 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 437 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 436 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 435 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 434 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 433 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 432 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 431 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 430 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 429 ...

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288

2019-06-05T15:36:37+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Alexios Zavras Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman