BMC/Intel-BMC/linux.git/drivers/infiniband/core/device.c, branch dev-4.17

Merge tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

2018-04-07T00:35:43+00:00

Pull rdma updates from Jason Gunthorpe: "Doug and I are at a conference next week so if another PR is sent I expect it to only be bug fixes. Parav noted yesterday that there are some fringe case behavior changes in his work that he would like to fix, and I see that Intel has a number of rc looking patches for HFI1 they posted yesterday. Parav is again the biggest contributor by patch count with his ongoing work to enable container support in the RDMA stack, followed by Leon doing syzkaller inspired cleanups, though most of the actual fixing went to RC. There is one uncomfortable series here fixing the user ABI to actually work as intended in 32 bit mode. There are lots of notes in the commit messages, but the basic summary is we don't think there is an actual 32 bit kernel user of drivers/infiniband for several good reasons. However we are seeing people want to use a 32 bit user space with 64 bit kernel, which didn't completely work today. So in fixing it we required a 32 bit rxe user to upgrade their userspace. rxe users are still already quite rare and we think a 32 bit one is non-existing. - Fix RDMA uapi headers to actually compile in userspace and be more complete - Three shared with netdev pull requests from Mellanox: * 7 patches, mostly to net with 1 IB related one at the back). This series addresses an IRQ performance issue (patch 1), cleanups related to the fix for the IRQ performance problem (patches 2-6), and then extends the fragmented completion queue support that already exists in the net side of the driver to the ib side of the driver (patch 7). * Mostly IB, with 5 patches to net that are needed to support the remaining 10 patches to the IB subsystem. This series extends the current 'representor' framework when the mlx5 driver is in switchdev mode from being a netdev only construct to being a netdev/IB dev construct. The IB dev is limited to raw Eth queue pairs only, but by having an IB dev of this type attached to the representor for a switchdev port, it enables DPDK to work on the switchdev device. * All net related, but needed as infrastructure for the rdma driver - Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers - SRP performance updates - IB uverbs write path cleanup patch series from Leon - Add RDMA_CM support to ib_srpt. This is disabled by default. Users need to set the port for ib_srpt to listen on in configfs in order for it to be enabled (/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port) - TSO and Scatter FCS support in mlx4 - Refactor of modify_qp routine to resolve problems seen while working on new code that is forthcoming - More refactoring and updates of RDMA CM for containers support from Parav - mlx5 'fine grained packet pacing', 'ipsec offload' and 'device memory' user API features - Infrastructure updates for the new IOCTL interface, based on increased usage - ABI compatibility bug fixes to fully support 32 bit userspace on 64 bit kernel as was originally intended. See the commit messages for extensive details - Syzkaller bugs and code cleanups motivated by them" * tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (199 commits) IB/rxe: Fix for oops in rxe_register_device on ppc64le arch IB/mlx5: Device memory mr registration support net/mlx5: Mkey creation command adjustments IB/mlx5: Device memory support in mlx5_ib net/mlx5: Query device memory capabilities IB/uverbs: Add device memory registration ioctl support IB/uverbs: Add alloc/free dm uverbs ioctl support IB/uverbs: Add device memory capabilities reporting IB/uverbs: Expose device memory capabilities to user RDMA/qedr: Fix wmb usage in qedr IB/rxe: Removed GID add/del dummy routines RDMA/qedr: Zero stack memory before copying to user space IB/mlx5: Add ability to hash by IPSEC_SPI when creating a TIR IB/mlx5: Add information for querying IPsec capabilities IB/mlx5: Add IPsec support for egress and ingress {net,IB}/mlx5: Add ipsec helper IB/mlx5: Add modify_flow_action_esp verb IB/mlx5: Add implementation for create and destroy action_xfrm IB/uverbs: Introduce ESP steering match filter IB/uverbs: Add modify ESP flow_action ...

IB/core: Simplify ib_query_gid to always refer to cache

2018-04-04T03:33:50+00:00

Currently following inconsistencies exist. 1. ib_query_gid() returns GID from the software cache for a RoCE port and returns GID from the HCA for an IB port. This is incorrect because software GID cache is maintained regardless of HCA port type. 2. GID is queries from the HCA via ib_query_gid and updated in the software cache for IB link layer. Both of them might not be in sync. ULPs such as SRP initiator, SRP target, IPoIB driver have historically used ib_query_gid() API to query the GID. However CM used cached version during CM processing, When software cache was introduced, this inconsitency remained. In order to simplify, improve readability and avoid link layer specific above inconsistencies, this patch brings following changes. 1. ib_query_gid() always refers to the cache layer regardless of link layer. 2. cache module who reads the GID entry from HCA and builds the cache, directly invokes the HCA provider verb's query_gid() callback function. 3. ib_query_port() is being called in early stage where GID cache is not yet build while reading port immutable property. Therefore it needs to read the default GID from the HCA for IB link layer to publish the subnet prefix. Signed-off-by: Parav Pandit Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

RDMA/providers: Simplify query_gid callback of RoCE providers

2018-04-04T03:33:47+00:00

ib_query_gid() fetches the GID from the software cache maintained in ib_core for RoCE ports. Therefore, simplify the provider drivers for RoCE to treat query_gid() callback as never called for RoCE, and only require non-RoCE devices to implement it. Signed-off-by: Parav Pandit Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

IB/core: Search GID only for IB link layer

2018-03-27T22:22:12+00:00

Even though API is only used by IPoIB driver, its incorrect to refer RoCE GID table property to search for GID. Look for only IB link layer to search for the GID. Fixes: dbb12562f7c2 ("IB/{core, ipoib}: Simplify ib_find_gid to search only for IB link layer") Signed-off-by: Parav Pandit Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

IB/core: Refer to RoCE port property instead of GID table property

2018-03-22T18:42:49+00:00

ib_query_gid() in commit [1] refers to RoCE GID table capability of the HCA using rdma_cap_roce_gid_table(). ib_core maintains the GID table cache regardless of the HCA provider drivers capability to maintain RoCE GID table. Therefore, whether to return a GID table entry from the software cache or from HCA should be done based on whether the port is RoCE or not. [1] commit 03db3a2d81e6 ("IB/core: Add RoCE GID table management") Reviewed-by: Mark Bloch Signed-off-by: Parav Pandit Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

RDMA/restrack: Move restrack_clean to be symmetrical to restrack_init

2018-03-21T20:22:22+00:00

The fact that resource tracking commit 02d8883f520e ("RDMA/restrack: Add general infrastructure to track RDMA resources") was added immediately after commit 16c1975f1032 ("IB/mlx5: Create profile infrastructure to add and remove stages") caused us to miss the fact that PD and CQ are created after ib_register_device, but released after ib_unregister_device() and not before as it is expected from normal flow. Fix introduced in commit 42cea83f9524 ("IB/mlx5: Fix cleanup order on unload") revealed this fact, so this patch is needed to avoid from restrack warnings It fixes resource tracking warnings during shutdown. [ 43.473906] CPU: 5 PID: 3016 Comm: modprobe Not tainted 4.16.0-rc5-for-linust-perf-2018-03-19_07-01-58-14 #1 [ 43.473907] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014 [ 43.473919] RIP: 0010:rdma_restrack_clean+0x25/0x30 [ib_core] [ 43.473921] RSP: 0018:ffffc9000267be48 EFLAGS: 00010282 [ 43.473924] RAX: 0000000000000000 RBX: ffff88033c690070 RCX: 0000000180080006 [ 43.473925] RDX: ffff88035ce922e0 RSI: ffffea000cf1a200 RDI: ffff88033c6907c8 [ 43.473926] RBP: ffff88033c690070 R08: ffff88033c689000 R09: 0000000180080006 [ 43.473927] R10: 000000003c68a001 R11: ffff88033c689000 R12: ffff88033c690000 [ 43.473929] R13: ffff88033c69005c R14: 0000000000000000 R15: 0000000000000000 [ 43.473932] FS: 00007f5928359740(0000) GS:ffff88036c540000(0000) knlGS:0000000000000000 [ 43.473933] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 43.473935] CR2: 00007ffffc760cc8 CR3: 000000035620c000 CR4: 00000000000006e0 [ 43.473940] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 43.473941] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 43.473942] Call Trace: [ 43.473969] ib_unregister_device+0xf5/0x190 [ib_core] [ 43.474000] __mlx5_ib_remove+0x2e/0x40 [mlx5_ib] [ 43.474098] mlx5_remove_device+0xf5/0x120 [mlx5_core] [ 43.474132] mlx5_unregister_interface+0x37/0x90 [mlx5_core] [ 43.474142] mlx5_ib_cleanup+0xc/0x16a [mlx5_ib] [ 43.474152] SyS_delete_module+0x159/0x260 [ 43.474159] do_syscall_64+0x61/0x110 [ 43.474165] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 43.474168] RIP: 0033:0x7f59278466b7 [ 43.474170] RSP: 002b:00007ffffc763e38 EFLAGS: 00000202 ORIG_RAX: 00000000000000b0 [ 43.474172] RAX: ffffffffffffffda RBX: 000000000130d590 RCX: 00007f59278466b7 [ 43.474173] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000000000130d5f8 [ 43.474175] RBP: 0000000000000000 R08: 00007f5927b0b060 R09: 00007f59278b6a40 [ 43.474176] R10: 00007ffffc763bc0 R11: 0000000000000202 R12: 0000000000000000 [ 43.474177] R13: 0000000000000001 R14: 000000000130d5f8 R15: 0000000000000000 [ 43.474179] Code: 84 00 00 00 00 00 0f 1f 44 00 00 48 83 c7 28 31 c0 eb 0c 48 83 c0 08 48 3d 00 08 00 00 74 0f 48 8d 14 07 48 8b 12 48 85 d2 74 e8 <0f> 0b c3 f3 c3 66 0f 1f 44 00 00 0f 1f 44 00 00 53 48 8b 47 28 [ 43.474221] ---[ end trace e89771e2250ffc23 ]--- Fixes: 42cea83f9524 ("IB/mlx5: Fix cleanup order on unload") Reviewed-by: Mark Bloch Signed-off-by: Parav Pandit Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

IB/{core, ipoib}: Simplify ib_find_gid() for unused ndev

2018-03-15T20:40:37+00:00

ib_find_gid() is only used by IPoIB driver. For IB link layer, GID table entries are not based on netdevice. Netdevice parameter is unused here. Therefore, it is removed. Reviewed-by: Daniel Jurgens Reviewed-by: Mark Bloch Signed-off-by: Parav Pandit Signed-off-by: Leon Romanovsky Reviewed-by: Yuval Shaia Signed-off-by: Jason Gunthorpe

IB/core: Fix missing RDMA cgroups release in case of failure to register device

2018-02-28T19:10:32+00:00

During IB device registration process, if query_device() fails or if ib_core fails to registers sysfs entries, rdma cgroup cleanup is skipped. Cc: # v4.2+ Fixes: 4be3a4fa51f4 ("IB/core: Fix kernel crash during fail to initialize device") Reviewed-by: Daniel Jurgens Signed-off-by: Parav Pandit Signed-off-by: Leon Romanovsky Signed-off-by: Jason Gunthorpe

RDMA/restrack: Add general infrastructure to track RDMA resources

2018-01-30T03:21:39+00:00

The RDMA subsystem has very strict set of objects to work with, but it completely lacks tracking facilities and has no visibility of resource utilization. The following patch adds such infrastructure to keep track of RDMA resources to help with debugging of user space applications. The primary user of this infrastructure is RDMA nldev netlink (following patches), to be exposed to userspace via rdmatool, but it is not limited too that. At this stage, the main three objects (PD, CQ and QP) are added, and more will be added later. Reviewed-by: Mark Bloch Signed-off-by: Leon Romanovsky Reviewed-by: Steve Wise Signed-off-by: Jason Gunthorpe

Merge branch 'bart-srpt-for-next' into k.o/wip/dl-for-next

2018-01-08T21:06:20+00:00

Merging in 12 patch series from Bart that required changes in the current for-rc branch in order to apply cleanly. Signed-off-by: Doug Ledford