BMC/Intel-BMC/linux.git/drivers/iio/proximity, branch dev-4.4

iio: proximity: as3935: set up buffer timestamps for non-zero values

2016-09-24T08:07:37+00:00

commit f8adf645db03345af2d9a8b6095b02327ea50885 upstream. Use the iio_pollfunc_store_time parameter during triggered buffer set-up to get valid timestamps. Signed-off-by: Alison Schofield Cc: Daniel Baluta Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: proximity: as3935: fix buffer stack trashing

2016-07-27T16:47:36+00:00

commit 37b1ba2c68cfbe37f5f45bb91bcfaf2b016ae6a1 upstream. Buffer wasn't of a valid size to allow the timestamp, and correct padding. This patchset also moves the buffer off the stack, and onto the heap. Cc: george.mccollister@gmail.com Signed-off-by: Matt Ranostay Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: proximity: as3935: remove triggered buffer processing

2016-07-27T16:47:36+00:00

commit 7d0643634ea567969bf3f3ed6193a9d6fc75653b upstream. Triggered buffers shouldn't return processed data, and the respective conversion was overflowing the defined .realbits for the channel. Cc: george.mccollister@gmail.com Signed-off-by: Matt Ranostay Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: proximity: as3935: correct IIO_CHAN_INFO_RAW output

2016-07-27T16:47:36+00:00

commit 5138806f16c74c7cb8ac3e408a859c79eb7c9567 upstream. IIO_CHAN_INFO_RAW was returning processed data which was incorrect. This also adds the IIO_CHAN_INFO_SCALE value to convert to a processed value. Signed-off-by: Matt Ranostay Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: lidar: return -EINVAL on invalid signal

2015-11-21T15:56:53+00:00

Returning zero from the measurment function has the side effect of corrupting the triggered buffer readings, better to use -EINVAL than a zero measurement reading. The INVALID status happens even it isn't out of range sometimes roughly once every second or two. This can be from an invalid second signal return path. Hence there are spurious zero readings from the triggered buffer, and warning messages in the kernel log. Signed-off-by: Matt Ranostay Signed-off-by: Jonathan Cameron

Merge tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2015-11-05T21:15:12+00:00

Pull spi updates from Mark Brown: "Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver" * tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI spi: pxa2xx: Add support for Intel Broxton spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals spi: pxa2xx: Add output control for multiple Intel LPSS chip selects spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific spi: Add DSPI support for layerscape family spi: ti-qspi: improve ->remove() callback spi/spi-xilinx: Fix race condition on last word read spi: Drop owner assignment from spi_drivers spi: Add THIS_MODULE to spi_driver in SPI core spi: Setup the master controller driver before setting the chipselect spi: dw: replace magic constant by DW_SPI_DR spi: mediatek: mt8173 spi multiple devices support spi: mediatek: handle controller_data in mtk_spi_setup spi: mediatek: remove mtk_spi_config spi: mediatek: Update document devicetree bindings to support multiple devices spi: fix kernel-doc warnings about missing return desc in spi.c spi: fix kernel-doc warnings about missing return desc in spi.h spi: pxa2xx: Align a few defines spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select ...

spi: Drop owner assignment from spi_drivers

2015-10-28T01:30:17+00:00

An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis Acked-by: Jonathan Cameron Signed-off-by: Mark Brown

iio: remove gpio interrupt probing from drivers that use a single interrupt

2015-10-03T11:05:51+00:00

Commit 845c877009cf014b ("i2c / ACPI: Assign IRQ for devices that have GpioInt automatically") automatically assigns the first ACPI GPIO interrupt in client->irq, so we can remove the probing code from drivers that use only one interrupt. Signed-off-by: Octavian Purdila Signed-off-by: Jonathan Cameron

iio: lidar: add missing MODULE_DEVICE_TABLE for dt

2015-09-30T17:20:53+00:00

The device tree compatible strings weren't properly registered for the pulsedlight-lidar-lite-v2 driver. Signed-off-by: Matt Ranostay Signed-off-by: Jonathan Cameron

iio: proximity: add support for PulsedLight LIDAR

2015-08-31T15:48:16+00:00

Add support for the PulsedLight LIDAR rangefinder sensor which allows high speed (over 300Hz) distance measurements using Barker Coding within 40 meter range. Support only tested on the "blue label" rev 2, but may work using low sample frequencies on the original version. Signed-off-by: Matt Ranostay Signed-off-by: Jonathan Cameron