BMC/Intel-BMC/linux.git/drivers/iio/adc, branch dev-5.2

iio: adc: max9611: Fix temperature reading in probe

2019-08-25T14:10:34+00:00

commit b9ddd5091160793ee9fac10da765cf3f53d2aaf0 upstream. The max9611 driver reads the die temperature at probe time to validate the communication channel. Use the actual read value to perform the test instead of the read function return value, which was mistakenly used so far. The temperature reading test was only successful because the 0 return value is in the range of supported temperatures. Fixes: 69780a3bbc0b ("iio: adc: Add Maxim max9611 ADC driver") Signed-off-by: Jacopo Mondi Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: max9611: Fix misuse of GENMASK macro

2019-08-16T08:10:49+00:00

commit ae8cc91a7d85e018c0c267f580820b2bb558cd48 upstream. Arguments are supposed to be ordered high then low. Signed-off-by: Joe Perches Fixes: 69780a3bbc0b ("iio: adc: Add Maxim max9611 ADC driver") Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: gyroadc: fix uninitialized return code

2019-08-16T08:10:49+00:00

commit 90c6260c1905a68fb596844087f2223bd4657fee upstream. gcc-9 complains about a blatant uninitialized variable use that all earlier compiler versions missed: drivers/iio/adc/rcar-gyroadc.c:510:5: warning: 'ret' may be used uninitialized in this function [-Wmaybe-uninitialized] Return -EINVAL instead here and a few lines above it where we accidentally return 0 on failure. Cc: stable@vger.kernel.org Fixes: 059c53b32329 ("iio: adc: Add Renesas GyroADC driver") Signed-off-by: Arnd Bergmann Reviewed-by: Wolfram Sang Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

IIO: Ingenic JZ47xx: Set clock divider on probe

2019-08-16T08:10:48+00:00

commit 5a304e1a4ea000177cf25f5ecf26e786dda25b98 upstream. The SADC component can run at up to 8 MHz on JZ4725B, but is fed a 12 MHz input clock (EXT). Divide it by two to get 6 MHz, then set up another divider to match, to produce a 10us clock. If the clock dividers are left on their power-on defaults (a divider of 1), the SADC mostly works, but will occasionally produce erroneous readings. This led to button presses being detected out of nowhere on the RS90 every few minutes. With this change, no ghost button presses were logged in almost a day worth of testing. The ADCLK register for configuring clock dividers doesn't exist on JZ4740, so avoid writing it there. A function has been introduced rather than a flag because there is a lot of variation between the ADCLK registers on JZ47xx SoCs, both in the internal layout of the register and in the frequency range supported by the SADC. So this solution should make it easier to add support for other JZ47xx SoCs later. Fixes: 1a78daea107d ("iio: adc: probe should set clock divider") Signed-off-by: Maarten ter Huurne Signed-off-by: Artur Rojek Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

iio: adc: stm32-dfsdm: missing error case during probe

2019-07-31T05:24:29+00:00

[ Upstream commit d2fc0156963cae8f1eec8e2dd645fbbf1e1c1c8e ] During probe, check the devm_ioremap_resource() error value. Also return the devm_clk_get() error value instead of -EINVAL. Signed-off-by: Fabien Dessenne Acked-by: Fabrice Gasnier Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: adc: stm32-dfsdm: manage the get_irq error case

2019-07-31T05:24:28+00:00

[ Upstream commit 3e53ef91f826957dec013c47707ffc1bb42b42d7 ] During probe, check the "get_irq" error value. Signed-off-by: Fabien Dessenne Acked-by: Fabrice Gasnier Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin

iio: adc: stm32-adc: add missing vdda-supply

2019-07-14T06:01:12+00:00

commit 7685010fca2ba0284f31fd1380df3cffc96d847e upstream. Add missing vdda-supply, analog power supply, to STM32 ADC. When vdda is an independent supply, it needs to be properly turned on or off to supply the ADC. Signed-off-by: Fabrice Gasnier Fixes: 1add69880240 ("iio: adc: Add support for STM32 ADC core"). Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 459

2019-06-19T15:09:09+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation the gpl this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license version 2 gplv2 for more details you should have received a copy of the gnu general public license version 2 gplv2 along with this source code extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 16 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081201.771169395@linutronix.de Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 446

2019-06-05T15:37:18+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 30 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.962665879@linutronix.de Signed-off-by: Greg Kroah-Hartman