BMC/Intel-BMC/linux.git/drivers/i2c, branch v5.2.10

Revert "i2c: imx: improve the error handling in i2c_imx_dma_request()"

2019-08-25T14:10:24+00:00

commit e8c220fac415d9f4a994b0c2871b835feac1eb4e upstream. Since commit e1ab9a468e3b ("i2c: imx: improve the error handling in i2c_imx_dma_request()") when booting with the DMA driver as module (such as CONFIG_FSL_EDMA=m) the following endless clk warnings are seen: [ 153.077831] ------------[ cut here ]------------ [ 153.082528] WARNING: CPU: 0 PID: 15 at drivers/clk/clk.c:924 clk_core_disable_lock+0x18/0x24 [ 153.093077] i2c0 already disabled [ 153.096416] Modules linked in: [ 153.099521] CPU: 0 PID: 15 Comm: kworker/0:1 Tainted: G W 5.2.0+ #321 [ 153.107290] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) [ 153.113772] Workqueue: events deferred_probe_work_func [ 153.118979] [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [ 153.126778] [] (show_stack) from [] (dump_stack+0x9c/0xd4) [ 153.134051] [] (dump_stack) from [] (__warn+0xf8/0x124) [ 153.141056] [] (__warn) from [] (warn_slowpath_fmt+0x38/0x48) [ 153.148580] [] (warn_slowpath_fmt) from [] (clk_core_disable_lock+0x18/0x24) [ 153.157413] [] (clk_core_disable_lock) from [] (i2c_imx_probe+0x554/0x6ec) [ 153.166076] [] (i2c_imx_probe) from [] (platform_drv_probe+0x48/0x98) [ 153.174297] [] (platform_drv_probe) from [] (really_probe+0x1d8/0x2c0) [ 153.182605] [] (really_probe) from [] (driver_probe_device+0x5c/0x174) [ 153.190909] [] (driver_probe_device) from [] (bus_for_each_drv+0x44/0x8c) [ 153.199480] [] (bus_for_each_drv) from [] (__device_attach+0xa0/0x108) [ 153.207782] [] (__device_attach) from [] (bus_probe_device+0x88/0x90) [ 153.215999] [] (bus_probe_device) from [] (deferred_probe_work_func+0x60/0x90) [ 153.225003] [] (deferred_probe_work_func) from [] (process_one_work+0x204/0x634) [ 153.234178] [] (process_one_work) from [] (worker_thread+0x20/0x484) [ 153.242315] [] (worker_thread) from [] (kthread+0x118/0x150) [ 153.249758] [] (kthread) from [] (ret_from_fork+0x14/0x20) [ 153.257006] Exception stack(0xdde43fb0 to 0xdde43ff8) [ 153.262095] 3fa0: 00000000 00000000 00000000 00000000 [ 153.270306] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 153.278520] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 153.285159] irq event stamp: 3323022 [ 153.288787] hardirqs last enabled at (3323021): [] _raw_spin_unlock_irq+0x24/0x2c [ 153.297261] hardirqs last disabled at (3323022): [] clk_enable_lock+0x10/0x124 [ 153.305392] softirqs last enabled at (3322092): [] __do_softirq+0x344/0x540 [ 153.313352] softirqs last disabled at (3322081): [] irq_exit+0x10c/0x128 [ 153.320946] ---[ end trace a506731ccd9bd703 ]--- This endless clk warnings behaviour is well explained by Andrey Smirnov: "Allocating DMA after registering I2C adapter can lead to infinite probing loop, for example, consider the following scenario: 1. i2c_imx_probe() is called and successfully registers an I2C adapter via i2c_add_numbered_adapter() 2. As a part of i2c_add_numbered_adapter() new I2C slave devices are added from DT which results in a call to driver_deferred_probe_trigger() 3. i2c_imx_probe() continues and calls i2c_imx_dma_request() which due to lack of proper DMA driver returns -EPROBE_DEFER 4. i2c_imx_probe() fails, removes I2C adapter and returns -EPROBE_DEFER, which places it into deferred probe list 5. Deferred probe work triggered in #2 above kicks in and calls i2c_imx_probe() again thus bringing us to step #1" So revert commit e1ab9a468e3b ("i2c: imx: improve the error handling in i2c_imx_dma_request()") and restore the old behaviour, in order to avoid regressions on existing setups. Cc: Reported-by: Andrey Smirnov Reported-by: Russell King Fixes: e1ab9a468e3b ("i2c: imx: improve the error handling in i2c_imx_dma_request()") Signed-off-by: Fabio Estevam Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

i2c: at91: fix clk_offset for sama5d2

2019-08-06T17:08:17+00:00

commit b1ac6704493fa14b5dc19eb6b69a73932361a131 upstream. In SAMA5D2 datasheet, TWIHS_CWGR register rescription mentions clock offset of 3 cycles (compared to 4 in eg. SAMA5D3). Cc: stable@vger.kernel.org # 5.2.x [needs applying to i2c-at91.c instead for earlier kernels] Fixes: 0ef6f3213dac ("i2c: at91: add support for new alternative command mode") Signed-off-by: Michał Mirosław Acked-by: Ludovic Desroches Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

i2c: at91: disable TXRDY interrupt after sending data

2019-08-06T17:08:17+00:00

commit d12e3aae160fb26b534c4496b211d6e60a5179ed upstream. Driver was not disabling TXRDY interrupt after last TX byte. This caused interrupt storm until transfer timeouts for slow or broken device on the bus. The patch fixes the interrupt storm on my SAMA5D2-based board. Cc: stable@vger.kernel.org # 5.2.x [v5.2 introduced file split; the patch should apply to i2c-at91.c before the split] Fixes: fac368a04048 ("i2c: at91: add new driver") Signed-off-by: Michał Mirosław Acked-by: Ludovic Desroches Tested-by: Raag Jadav Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

i2c: iproc: Fix i2c master read more than 63 bytes

2019-08-06T17:08:16+00:00

commit fd01eecdf9591453177d7b06faaabef8c300114a upstream. Use SMBUS_MASTER_DATA_READ.MASTER_RD_STATUS bit to check for RX FIFO empty condition because SMBUS_MASTER_FIFO_CONTROL.MASTER_RX_PKT_COUNT is not updated for read >= 64 bytes. This fixes the issue when trying to read from the I2C slave more than 63 bytes. Fixes: c24b8d574b7c ("i2c: iproc: Extend I2C read up to 255 bytes") Cc: stable@kernel.org Signed-off-by: Rayagonda Kokatanur Reviewed-by: Ray Jui Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

i2c: stm32f7: fix the get_irq error cases

2019-07-31T05:24:43+00:00

[ Upstream commit 79b4499524ed659fb76323efc30f3dc03967c88f ] During probe, return the "get_irq" error value instead of -EINVAL which allows the driver to be deferred probed if needed. Fix also the case where of_irq_get() returns a negative value. Note : On failure of_irq_get() returns 0 or a negative value while platform_get_irq() returns a negative value. Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver") Reviewed-by: Pierre-Yves MORDRET Signed-off-by: Fabien Dessenne Signed-off-by: Fabrice Gasnier Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

i2c: nvidia-gpu: resume ccgx i2c client

2019-07-31T05:24:37+00:00

[ Upstream commit 9f2e244d0a39eb437f98324ac315e605e48636db ] Cypress USB Type-C CCGx controller firmware version 3.1.10 (which is being used in many NVIDIA GPU cards) has known issue of not triggering interrupt when a USB device is hot plugged to runtime resume the controller. If any GPU card gets latest kernel with runtime pm support but does not get latest fixed firmware then also it should continue to work and therefore a workaround is required to check for any connector change event The workaround is to request runtime resume of i2c client which is UCSI Cypress CCGx driver. CCG driver will call the ISR for any connector change event only if NVIDIA GPU has old CCG firmware with the known issue. Signed-off-by: Ajay Gupta Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 462

2019-06-19T15:09:10+00:00

Based on 1 normalized pattern(s): license gpl v2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Enrico Weigelt Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081202.146070292@linutronix.de Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 235

2019-06-19T15:09:07+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 53 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Alexios Zavras Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.904365654@linutronix.de Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 233

2019-06-19T15:09:06+00:00

Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 6 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Alexios Zavras Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.720704315@linutronix.de Signed-off-by: Greg Kroah-Hartman