BMC/Intel-BMC/linux.git/drivers/hid, branch dev-5.1

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-07-02T05:03:44+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman (cherry picked from commit 2874c5fd284268364ece81a7bd936f3c8168e567) Signed-off-by: Joel Stanley

HID: wacom: Sync INTUOSP2_BT touch state after each frame if necessary

2019-06-19T06:00:00+00:00

commit 69dbdfffef20c715df9f381b2cee4e9e0a4efd93 upstream. The Bluetooth interface of the 2nd-gen Intuos Pro batches together four independent "frames" of finger data into a single report. Each frame is essentially equivalent to a single USB report, with the up-to-10 fingers worth of information being spread across two frames. At the moment the driver only calls `input_sync` after processing all four frames have been processed, which can result in the driver sending multiple updates for a single slot within the same SYN_REPORT. This can confuse userspace, so modify the driver to sync more often if necessary (i.e., after reporting the state of all fingers). Fixes: 4922cd26f03c ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface") Cc: # 4.11+ Signed-off-by: Jason Gerecke Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman

HID: wacom: Correct button numbering 2nd-gen Intuos Pro over Bluetooth

2019-06-19T06:00:00+00:00

commit 6441fc781c344df61402be1fde582c4491fa35fa upstream. The button numbering of the 2nd-gen Intuos Pro is not consistent between the USB and Bluetooth interfaces. Over USB, the HID_GENERIC codepath enumerates the eight ExpressKeys first (BTN_0 - BTN_7) followed by the center modeswitch button (BTN_8). The Bluetooth codepath, however, has the center modeswitch button as BTN_0 and the the eight ExpressKeys as BTN_1 - BTN_8. To ensure userspace button mappings do not change depending on how the tablet is connected, modify the Bluetooth codepath to report buttons in the same order as USB. To ensure the mode switch LED continues to toggle in response to the mode switch button, the `wacom_is_led_toggled` function also requires a small update. Link: https://github.com/linuxwacom/input-wacom/pull/79 Fixes: 4922cd26f03c ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface") Cc: # 4.11+ Signed-off-by: Jason Gerecke Reviewed-by: Aaron Skomra Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman

HID: wacom: Send BTN_TOUCH in response to INTUOSP2_BT eraser contact

2019-06-19T06:00:00+00:00

commit fe7f8d73d1af19b678171170e4e5384deb57833d upstream. The Bluetooth reports from the 2nd-gen Intuos Pro have separate bits for indicating if the tip or eraser is in contact with the tablet. At the moment, only the tip contact bit controls the state of the BTN_TOUCH event. This prevents the eraser from working as expected. This commit changes the driver to send BTN_TOUCH whenever either the tip or eraser contact bit is set. Fixes: 4922cd26f03c ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface") Cc: # 4.11+ Signed-off-by: Jason Gerecke Reviewed-by: Aaron Skomra Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman

HID: wacom: Don't report anything prior to the tool entering range

2019-06-19T06:00:00+00:00

commit e92a7be7fe5b2510fa60965eaf25f9e3dc08b8cc upstream. If the tool spends some time in prox before entering range, a series of events (e.g. ABS_DISTANCE, MSC_SERIAL) can be sent before we or userspace have any clue about the pen whose data is being reported. We need to hold off on reporting anything until the pen has entered range. Since we still want to report events that occur "in prox" after the pen has *left* range we use 'wacom-tool[0]' as the indicator that the pen did at one point enter range and provide us/userspace with tool type and serial number information. Fixes: a48324de6d4d ("HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range") Cc: # 4.11+ Signed-off-by: Jason Gerecke Reviewed-by: Aaron Armstrong Skomra Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman

HID: wacom: Don't set tool type until we're in range

2019-06-19T05:59:59+00:00

commit 2cc08800a6b9fcda7c7afbcf2da1a6e8808da725 upstream. The serial number and tool type information that is reported by the tablet while a pen is merely "in prox" instead of fully "in range" can be stale and cause us to report incorrect tool information. Serial number, tool type, and other information is only valid once the pen comes fully in range so we should be careful to not use this information until that point. In particular, this issue may cause the driver to incorectly report BTN_TOOL_RUBBER after switching from the eraser tool back to the pen. Fixes: a48324de6d4d ("HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range") Cc: # 4.11+ Signed-off-by: Jason Gerecke Reviewed-by: Aaron Armstrong Skomra Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman

HID: multitouch: handle faulty Elo touch device

2019-06-19T05:59:59+00:00

commit 81bcbad53bab4bf9f200eda303d7a05cdb9bd73b upstream. Since kernel v5.0, one single win8 touchscreen device failed. And it turns out this is because it reports 2 InRange usage per touch. It's a first, and I *really* wonder how this was allowed by Microsoft in the first place. But IIRC, Breno told me this happened *after* a firmware upgrade... Anyway, better be safe for those crappy devices, and make sure we have a full slot before jumping to the next. This won't prevent all crappy devices to fail here, but at least we will have a safeguard as long as the contact ID and the X and Y coordinates are placed in the report after the grabage. Fixes: 01eaac7e5713 ("HID: multitouch: remove one copy of values") CC: stable@vger.kernel.org # v5.0+ Reported-and-tested-by: Breno Leitao Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman

Revert "HID: Increase maximum report size allowed by hid_field_extract()"

2019-06-19T05:59:59+00:00

commit 15fc1b5c86128f91c8c6699c3b0d9615740b13f1 upstream. This reverts commit 94a9992f7dbdfb28976b565af220e0c4a117144a. The commit allows for more than 32 bits in hid_field_extract(), but the return value is a 32 bits int. So basically what this commit is doing is just silencing those legitimate errors. Revert to a previous situation in the hope that a proper fix will be impletemented. Fixes: 94a9992f7dbd ("HID: Increase maximum report size allowed by hid_field_extract()") Cc: stable@vger.kernel.org # v5.1 Acked-by: Jiri Kosina Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman

HID: input: fix assignment of .value

2019-06-19T05:59:59+00:00

commit 39b3c3a5fbc5d744114e497d35bf0c12f798c134 upstream. The value field is actually an array of .maxfield. We should assign the correct number to the correct usage. Not that we never encounter a device that requires this ATM, but better have the proper code path. Fixes: 2dc702c991e377 ("HID: input: use the Resolution Multiplier for high-resolution scrolling") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman

HID: input: make sure the wheel high resolution multiplier is set

2019-06-19T05:59:59+00:00

commit d43c17ead879ba7c076dc2f5fd80cd76047c9ff4 upstream. Some old mice have a tendency to not accept the high resolution multiplier. They reply with a -EPIPE which was previously ignored. Force the call to resolution multiplier to be synchronous and actually check for the answer. If this fails, consider the mouse like a normal one. Fixes: 2dc702c991e377 ("HID: input: use the Resolution Multiplier for high-resolution scrolling") Link: https://bugzilla.redhat.com/show_bug.cgi?id=1700071 Reported-and-tested-by: James Feeney Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman