BMC/Intel-BMC/linux.git/drivers/hid, branch dev-5.0

HID: input: add mapping for Assistant key

2019-05-08T05:22:52+00:00

[ Upstream commit ce856634af8cda3490947df8ac1ef5843e6356af ] According to HUTRR89 usage 0x1cb from the consumer page was assigned to allow launching desktop-aware assistant application, so let's add the mapping. Signed-off-by: Dmitry Torokhov Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin (Microsoft)

HID: quirks: Fix keyboard + touchpad on Lenovo Miix 630

2019-05-08T05:22:50+00:00

[ Upstream commit 2bafa1e9625400bec4c840a168d70ba52607a58d ] Similar to commit edfc3722cfef ("HID: quirks: Fix keyboard + touchpad on Toshiba Click Mini not working"), the Lenovo Miix 630 has a combo keyboard/touchpad device with vid:pid of 04F3:0400, which is shared with Elan touchpads. The combo on the Miix 630 has an ACPI id of QTEC0001, which is not claimed by the elan_i2c driver, so key on that similar to what was done for the Toshiba Click Mini. Signed-off-by: Jeffrey Hugo Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin (Microsoft)

HID: debug: fix race condition with between rdesc_show() and device removal

2019-05-08T05:22:47+00:00

[ Upstream commit cef0d4948cb0a02db37ebfdc320e127c77ab1637 ] There is a race condition that could happen if hid_debug_rdesc_show() is running while hdev is in the process of going away (device removal, system suspend, etc) which could result in NULL pointer dereference: BUG: unable to handle kernel paging request at 0000000783316040 CPU: 1 PID: 1512 Comm: getevent Tainted: G U O 4.19.20-quilt-2e5dc0ac-00029-gc455a447dd55 #1 RIP: 0010:hid_dump_device+0x9b/0x160 Call Trace: hid_debug_rdesc_show+0x72/0x1d0 seq_read+0xe0/0x410 full_proxy_read+0x5f/0x90 __vfs_read+0x3a/0x170 vfs_read+0xa0/0x150 ksys_read+0x58/0xc0 __x64_sys_read+0x1a/0x20 do_syscall_64+0x55/0x110 entry_SYSCALL_64_after_hwframe+0x49/0xbe Grab driver_input_lock to make sure the input device exists throughout the whole process of dumping the rdesc. [jkosina@suse.cz: update changelog a bit] Signed-off-by: he, bo Signed-off-by: "Zhang, Jun" Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin (Microsoft)

HID: logitech: check the return value of create_singlethread_workqueue

2019-05-08T05:22:47+00:00

[ Upstream commit 6c44b15e1c9076d925d5236ddadf1318b0a25ce2 ] create_singlethread_workqueue may fail and return NULL. The fix checks if it is NULL to avoid NULL pointer dereference. Also, the fix moves the call of create_singlethread_workqueue earlier to avoid resource-release issues. Signed-off-by: Kangjie Lu Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin (Microsoft)

HID: Increase maximum report size allowed by hid_field_extract()

2019-05-08T05:22:47+00:00

[ Upstream commit 94a9992f7dbdfb28976b565af220e0c4a117144a ] Commit 71f6fa90a353 ("HID: increase maximum global item tag report size to 256") increases the max report size from 128 to 256. We also need to update the report size in hid_field_extract() otherwise it complains and truncates now valid report size: [ 406.165461] hid-sensor-hub 001F:8086:22D8.0002: hid_field_extract() called with n (192) > 32! (kworker/5:1) BugLink: https://bugs.launchpad.net/bugs/1818547 Fixes: 71f6fa90a353 ("HID: increase maximum global item tag report size to 256") Signed-off-by: Kai-Heng Feng Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin (Microsoft)

HID: logitech: Handle 0 scroll events for the m560

2019-04-17T06:39:46+00:00

commit fd35759ce32b60d3eb52436894bab996dbf8cffa upstream. hidpp_scroll_counter_handle_scroll() doesn't expect a 0-value scroll event, it gets interpreted as a negative scroll direction event. This can cause scroll direction resets and thus broken scrolling. Fixes: 4435ff2f09a2fc ("HID: logitech: Enable high-resolution scrolling on Logitech mice") Cc: stable@vger.kernel.org # v5.0 Reported-and-tested-by: Aimo Metsälä Signed-off-by: Peter Hutterer Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman

HID: intel-ish: ipc: handle PIMR before ish_wakeup also clear PISR busy_clear bit

2019-04-05T20:34:48+00:00

[ Upstream commit 2edefc056e4f0e6ec9508dd1aca2c18fa320efef ] Host driver should handle interrupt mask register earlier than wake up ish FW else there will be conditions when FW interrupt comes, host PIMR register still not set ready, so move the interrupt mask setting before ish_wakeup. Clear PISR busy_clear bit in ish_irq_handler. If not clear, there will be conditions host driver received a busy_clear interrupt (before the busy_clear mask bit is ready), it will return IRQ_NONE after check_generated_interrupt, the interrupt will never be cleared, causing the DEVICE not sending following IRQ. Since PISR clear should not be called for the CHV device we do this change. After the change, both ISH2HOST interrupt and busy_clear interrupt will be considered as interrupt from ISH, busy_clear interrupt will return IRQ_HANDLED from IPC_IS_BUSY check. Signed-off-by: Song Hongyan Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

HID: intel-ish-hid: avoid binding wrong ishtp_cl_device

2019-04-05T20:34:36+00:00

[ Upstream commit 0d28f49412405d87d3aae83da255070a46e67627 ] When performing a warm reset in ishtp bus driver, the ishtp_cl_device will not be removed, its fw_client still points to the already freed ishtp_device.fw_clients array. Later after driver finishing ishtp client enumeration, this dangling pointer may cause driver to bind the wrong ishtp_cl_device to the new client, causing wrong callback to be called for messages intended for the new client. This helps in development of firmware where frequent switching of firmwares is required without Linux reboot. Signed-off-by: Hong Liu Tested-by: Hongyan Song Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin

HID: debug: fix the ring buffer implementation

2019-01-29T11:09:11+00:00

Ring buffer implementation in hid_debug_event() and hid_debug_events_read() is strange allowing lost or corrupted data. After commit 717adfdaf147 ("HID: debug: check length before copy_to_user()") it is possible to enter an infinite loop in hid_debug_events_read() by providing 0 as count, this locks up a system. Fix this by rewriting the ring buffer implementation with kfifo and simplify the code. This fixes CVE-2019-3819. v2: fix an execution logic and add a comment v3: use __set_current_state() instead of set_current_state() Link: https://bugzilla.redhat.com/show_bug.cgi?id=1669187 Cc: stable@vger.kernel.org # v4.18+ Fixes: cd667ce24796 ("HID: use debugfs for events/reports dumping") Fixes: 717adfdaf147 ("HID: debug: check length before copy_to_user()") Signed-off-by: Vladis Dronov Reviewed-by: Oleg Nesterov Signed-off-by: Benjamin Tissoires

HID: core: simplify active collection tracking

2019-01-16T13:29:48+00:00

Manually tracking an active collection to set collection parents is not necessary, we just have to look one step back into the collection stack to find the correct parent. Signed-off-by: Philipp Zabel Reviewed-by: Peter Hutterer Signed-off-by: Benjamin Tissoires