BMC/Intel-BMC/linux.git/drivers/gpu, branch dev-5.10.49-intel

Merge tag 'v5.10.49' into dev-5.10

2021-07-12T10:51:21+00:00

This is the 5.10.49 stable release Signed-off-by: Joel Stanley

drm/nouveau: fix dma_address check for CPU/GPU sync

2021-07-07T12:22:46+00:00

[ Upstream commit d330099115597bbc238d6758a4930e72b49ea9ba ] AGP for example doesn't have a dma_address array. Signed-off-by: Christian König Acked-by: Alex Deucher Link: https://patchwork.freedesktop.org/patch/msgid/20210614110517.1624-1-christian.koenig@amd.com Signed-off-by: Sasha Levin

Revert "drm: add a locked version of drm_is_current_master"

2021-06-30T12:47:30+00:00

commit f54b3ca7ea1e5e02f481cf4ca54568e57bd66086 upstream. This reverts commit 1815d9c86e3090477fbde066ff314a7e9721ee0f. Unfortunately this inverts the locking hierarchy, so back to the drawing board. Full lockdep splat below: ====================================================== WARNING: possible circular locking dependency detected 5.13.0-rc7-CI-CI_DRM_10254+ #1 Not tainted ------------------------------------------------------ kms_frontbuffer/1087 is trying to acquire lock: ffff88810dcd01a8 (&dev->master_mutex){+.+.}-{3:3}, at: drm_is_current_master+0x1b/0x40 but task is already holding lock: ffff88810dcd0488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_mode_getconnector+0x1c6/0x4a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&dev->mode_config.mutex){+.+.}-{3:3}: __mutex_lock+0xab/0x970 drm_client_modeset_probe+0x22e/0xca0 __drm_fb_helper_initial_config_and_unlock+0x42/0x540 intel_fbdev_initial_config+0xf/0x20 [i915] async_run_entry_fn+0x28/0x130 process_one_work+0x26d/0x5c0 worker_thread+0x37/0x380 kthread+0x144/0x170 ret_from_fork+0x1f/0x30 -> #1 (&client->modeset_mutex){+.+.}-{3:3}: __mutex_lock+0xab/0x970 drm_client_modeset_commit_locked+0x1c/0x180 drm_client_modeset_commit+0x1c/0x40 __drm_fb_helper_restore_fbdev_mode_unlocked+0x88/0xb0 drm_fb_helper_set_par+0x34/0x40 intel_fbdev_set_par+0x11/0x40 [i915] fbcon_init+0x270/0x4f0 visual_init+0xc6/0x130 do_bind_con_driver+0x1e5/0x2d0 do_take_over_console+0x10e/0x180 do_fbcon_takeover+0x53/0xb0 register_framebuffer+0x22d/0x310 __drm_fb_helper_initial_config_and_unlock+0x36c/0x540 intel_fbdev_initial_config+0xf/0x20 [i915] async_run_entry_fn+0x28/0x130 process_one_work+0x26d/0x5c0 worker_thread+0x37/0x380 kthread+0x144/0x170 ret_from_fork+0x1f/0x30 -> #0 (&dev->master_mutex){+.+.}-{3:3}: __lock_acquire+0x151e/0x2590 lock_acquire+0xd1/0x3d0 __mutex_lock+0xab/0x970 drm_is_current_master+0x1b/0x40 drm_mode_getconnector+0x37e/0x4a0 drm_ioctl_kernel+0xa8/0xf0 drm_ioctl+0x1e8/0x390 __x64_sys_ioctl+0x6a/0xa0 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &dev->master_mutex --> &client->modeset_mutex --> &dev->mode_config.mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&dev->mode_config.mutex); lock(&client->modeset_mutex); lock(&dev->mode_config.mutex); lock(&dev->master_mutex);

drm/vc4: hdmi: Make sure the controller is powered in detect

2021-06-30T12:47:17+00:00

[ Upstream commit 9984d6664ce9dcbbc713962539eaf7636ea246c2 ] If the HPD GPIO is not available and drm_probe_ddc fails, we end up reading the HDMI_HOTPLUG register, but the controller might be powered off resulting in a CPU hang. Make sure we have the power domain and the HSM clock powered during the detect cycle to prevent the hang from happening. Fixes: 4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver") Signed-off-by: Maxime Ripard Reviewed-by: Dave Stevenson Link: https://patchwork.freedesktop.org/patch/msgid/20210525091059.234116-4-maxime@cerno.tech Signed-off-by: Sasha Levin

drm/vc4: hdmi: Move the HSM clock enable to runtime_pm

2021-06-30T12:47:17+00:00

[ Upstream commit 411efa18e4b03840553ff58ad9b4621b82a30c04 ] In order to access the HDMI controller, we need to make sure the HSM clock is enabled. If we were to access it with the clock disabled, the CPU would completely hang, resulting in an hard crash. Since we have different code path that would require it, let's move that clock enable / disable to runtime_pm that will take care of the reference counting for us. Fixes: 4f6e3d66ac52 ("drm/vc4: Add runtime PM support to the HDMI encoder driver") Signed-off-by: Maxime Ripard Reviewed-by: Dave Stevenson Link: https://patchwork.freedesktop.org/patch/msgid/20210525091059.234116-3-maxime@cerno.tech Signed-off-by: Sasha Levin

drm/amdgpu: wait for moving fence after pinning

2021-06-30T12:47:16+00:00

commit 8ddf5b9bb479570a3825d70fecfb9399bc15700c upstream. We actually need to wait for the moving fence after pinning the BO to make sure that the pin is completed. Signed-off-by: Christian König Reviewed-by: Daniel Vetter References: https://lore.kernel.org/dri-devel/20210621151758.2347474-1-daniel.vetter@ffwll.ch/ CC: stable@kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20210622114506.106349-3-christian.koenig@amd.com Signed-off-by: Greg Kroah-Hartman

drm/radeon: wait for moving fence after pinning

2021-06-30T12:47:16+00:00

commit 4b41726aae563273bb4b4a9462ba51ce4d372f78 upstream. We actually need to wait for the moving fence after pinning the BO to make sure that the pin is completed. Signed-off-by: Christian König Reviewed-by: Daniel Vetter References: https://lore.kernel.org/dri-devel/20210621151758.2347474-1-daniel.vetter@ffwll.ch/ CC: stable@kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20210622114506.106349-2-christian.koenig@amd.com Signed-off-by: Greg Kroah-Hartman

drm/nouveau: wait for moving fence after pinning v2

2021-06-30T12:47:16+00:00

commit 17b11f71795abdce46f62a808f906857e525cea8 upstream. We actually need to wait for the moving fence after pinning the BO to make sure that the pin is completed. v2: grab the lock while waiting Signed-off-by: Christian König Reviewed-by: Daniel Vetter References: https://lore.kernel.org/dri-devel/20210621151758.2347474-1-daniel.vetter@ffwll.ch/ CC: stable@kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20210622114506.106349-1-christian.koenig@amd.com Signed-off-by: Greg Kroah-Hartman

drm: add a locked version of drm_is_current_master

2021-06-30T12:47:15+00:00

commit 1815d9c86e3090477fbde066ff314a7e9721ee0f upstream. While checking the master status of the DRM file in drm_is_current_master(), the device's master mutex should be held. Without the mutex, the pointer fpriv->master may be freed concurrently by another process calling drm_setmaster_ioctl(). This could lead to use-after-free errors when the pointer is subsequently dereferenced in drm_lease_owner(). The callers of drm_is_current_master() from drm_auth.c hold the device's master mutex, but external callers do not. Hence, we implement drm_is_current_master_locked() to be used within drm_auth.c, and modify drm_is_current_master() to grab the device's master mutex before checking the master status. Reported-by: Daniel Vetter Signed-off-by: Desmond Cheong Zhi Xi Reviewed-by: Emil Velikov Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20210620110327.4964-2-desmondcheongzx@gmail.com Signed-off-by: Greg Kroah-Hartman

Revert "drm/amdgpu/gfx10: enlarge CP_MEC_DOORBELL_RANGE_UPPER to cover full doorbell."

2021-06-30T12:47:15+00:00

commit baacf52a473b24e10322b67757ddb92ab8d86717 upstream. This reverts commit 1c0b0efd148d5b24c4932ddb3fa03c8edd6097b3. Reason for revert: Side effect of enlarging CP_MEC_DOORBELL_RANGE may cause some APUs fail to enter gfxoff in certain user cases. Signed-off-by: Yifan Zhang Acked-by: Alex Deucher Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman