BMC/Intel-BMC/linux.git/drivers/gpu/drm/rcar-du, branch dev-4.6

drm/rcar-du: removed optional dummy crtc mode_fixup function.

2016-03-04T16:58:47+00:00

This patch set nukes all the dummy crtc mode_fixup implementations. (made on top of Daniel topic/drm-misc branch) Signed-off-by: Carlos Palminha Reviewed-by: Laurent Pinchart Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/becab4ff666eca77162e5cd978087f2d3fb3e308.1455630967.git.palminha@synopsys.com

drm: rcar-du: Add tri-planar memory formats support

2016-02-23T07:34:33+00:00

Those formats are supported on Gen3 only. Signed-off-by: Laurent Pinchart

drm: rcar-du: Add probe deferral debug messages

2016-02-23T07:34:33+00:00

Print a message when the HDMI I2C slave encoder can't be found to help debugging probe deferral issues. Signed-off-by: Laurent Pinchart

drm: rcar-du: lvds: Add R-Car Gen3 support

2016-02-23T07:34:32+00:00

The LVDS encoder differs slightly in Gen3 SoCs in its PLL configuration. Add support for the Gen3 LVDS PLL parameters and startup procedure. Signed-off-by: Koji Matsuoka Signed-off-by: Laurent Pinchart

drm: rcar-du: lvds: Rename PLLEN bit to PLLON

2016-02-23T07:34:31+00:00

The bit is named PLLON in the datasheet, rename it. Signed-off-by: Laurent Pinchart

drm: rcar-du: lvds: Fix PLL frequency-related configuration

2016-02-23T07:34:30+00:00

The frequency checks don't match the datasheet, fix them. Signed-off-by: Laurent Pinchart

drm: rcar-du: lvds: Avoid duplication of clock clamp code

2016-02-23T07:34:30+00:00

Replace the duplicate code by a single central function. Signed-off-by: Laurent Pinchart

drm: rcar-du: Add R8A7795 device support

2016-02-23T07:34:29+00:00

Document the R8A7795-specific DT bindings and support them in the driver. The HDMI and LVDS outputs are currently not supported. Signed-off-by: Koji Matsuoka Signed-off-by: Laurent Pinchart

drm: rcar-du: Output the DISP signal on the ODDF pin

2016-02-23T07:34:28+00:00

The ODDF signal, output by default on the ODDF pin, isn't used on any board supported in the kernel. As the Gen3 Salvator-X board uses the ODDF pin as a DISP signal, hardcode that configuration in the driver. Use of the ODDF signal will be implemented later through proper DT-based configuration of the DU pins. Signed-off-by: Laurent Pinchart

drm: rcar-du: Output the DISP signal on the DISP pin

2016-02-23T07:34:28+00:00

The DE signal is currently configured to be identical to the DISP signal and is used for the same purpose. To make it clearer that the DISP pin outputs the DISP signal, select it explicitly. Signed-off-by: Laurent Pinchart