BMC/Intel-BMC/linux.git/drivers/gpu/drm/bridge/Kconfig, branch dev-4.18

Merge drm-fixes-for-v4.17-rc6-urgent into drm-next

2018-05-18T04:08:53+00:00

Need to backmerge some nouveau fixes to reduce the nouveau -next conflicts a lot. Signed-off-by: Dave Airlie

drm/bridge/sii8620: add Kconfig dependency on extcon

2018-05-07T14:19:12+00:00

The driver can work with or without extcon framework, but if extcon is build as module, sii8620 should be build as module as well. Fixes: 688838442147 ("drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL") Reported-by: kbuild test robot Signed-off-by: Andrzej Hajda Reviewed-by: Chanwoo Choi Link: https://patchwork.freedesktop.org/patch/msgid/20180409062708.4326-1-a.hajda@samsung.com Signed-off-by: Sean Paul

drm/bridge: Add Cadence DSI driver

2018-04-23T17:12:18+00:00

Add a driver for Cadence DPI -> DSI bridge. This driver only support a subset of Cadence DSI bridge capabilities. This driver has been tested/debugged in a simulated environment which explains why some of the features are missing. Here is a non-exhaustive list of missing features: * burst mode * DPHY init/configuration steps * support for additional input interfaces (SDI input) DSI commands and non-burst video mode have been tested. Signed-off-by: Boris Brezillon Reviewed-by: Andrzej Hajda Acked-by: Eric Anholt Reviewed-by: Archit Taneja Link: https://patchwork.freedesktop.org/patch/msgid/20180421070846.10330-1-boris.brezillon@bootlin.com

drm: bridge: Add thc63lvd1024 LVDS decoder driver

2018-04-20T09:08:24+00:00

Add DRM bridge driver for Thine THC63LVD1024 LVDS to digital parallel output converter. Signed-off-by: Jacopo Mondi Reviewed-by: Andrzej Hajda Reviewed-by: Niklas Söderlund Reviewed-by: Laurent Pinchart Reviewed-by: Vladimir Zapolskiy Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/1524062429-325-3-git-send-email-jacopo+renesas@jmondi.org

bridge: Elaborate a bit on dumb VGA bridges in Kconfig

2018-03-07T21:38:50+00:00

It's better if we explain a bit that this pertains to non-programmable VGA DAC bridges. Reviewed-by: Laurent Pinchart Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/20180302091426.8463-1-linus.walleij@linaro.org

drm/bridge/sii8620: add remote control support

2017-10-11T11:14:25+00:00

MHL specification defines Remote Control Protocol(RCP) to send input events between MHL devices. The driver now recognizes RCP messages and reacts to them by reporting key events to input subsystem, allowing a user to control a device using TV remote control. Signed-off-by: Maciej Purski Acked-by: Sean Young Acked-by: Mauro Carvalho Chehab Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/1503565087-19730-1-git-send-email-m.purski@samsung.com

drm/bridge: add Silicon Image SiI9234 driver

2017-10-06T12:28:22+00:00

SiI9234 transmitter converts eTMDS/HDMI signal to MHL 1.0. It is controlled via I2C bus. Its interaction with other devices in video pipeline is performed mainly on HW level. The only interaction it does on device driver level is filtering-out unsupported video modes, it exposes drm_bridge interface to perform this operation. This patch is based on the code refactored by Tomasz Stanislawski , which was initially developed by: Adam Hampson Erik Gilling Shankar Bandal Dharam Kumar Signed-off-by: Maciej Purski Acked-by: Rob Herring [for dt bindings] Reviewed-by: Andrzej Hajda Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/1507212431-5801-2-git-send-email-m.purski@samsung.com

drm/bridge: Refactor out the panel wrapper from the lvds-encoder bridge.

2017-06-05T08:30:40+00:00

Many DRM drivers have common code to make a stub connector implementation that wraps a drm_panel. By wrapping the panel in a DRM bridge, all of the connector code (including calls during encoder enable/disable) goes away. v2: Fix build with CONFIG_DRM=m, drop "dev" argument that should just be the panel's dev, move kerneldoc up a level and document _remove(). v3: Fix another breakage with CONFIG_DRM=m, fix breakage with CONFIG_OF=n, move protos under CONFIG_DRM_PANEL_BRIDGE, wrap a line. Signed-off-by: Eric Anholt Acked-by: Daniel Vetter (v1) Reviewed-by: Boris Brezillon (v2) Acked-by: Archit Taneja (v2) Signed-off-by: Archit Taneja Link: http://patchwork.freedesktop.org/patch/msgid/20170602202514.11900-1-eric@anholt.net

drm: bridge: dw-hdmi: Move the driver to a separate directory.

2017-03-10T11:02:54+00:00

The driver is already made of 5 separate source files. Move it to a newly created directory named synopsys where more Synopsys bridge drivers can be added later (for the DisplayPort controller for instance). Suggested-by: Jose Abreu Signed-off-by: Laurent Pinchart Reviewed-by: Jose Abreu Signed-off-by: Archit Taneja Link: http://patchwork.freedesktop.org/patch/msgid/20170303172007.26541-10-laurent.pinchart+renesas@ideasonboard.com

drm: bridge: Add LVDS encoder driver

2017-03-05T13:31:30+00:00

The LVDS encoder driver is a DRM bridge driver that supports the parallel to LVDS encoders that don't require any configuration. The driver thus doesn't interact with the device, but creates an LVDS connector for the panel and exposes its size and timing based on information retrieved from DT. Signed-off-by: Laurent Pinchart Acked-by: Daniel Vetter Signed-off-by: Archit Taneja Link: http://patchwork.freedesktop.org/patch/msgid/20170302104728.7150-3-laurent.pinchart+renesas@ideasonboard.com