Intel OpenBMC Linux kernel source tree (mirror) https://git.radix-linux.su/BMC/Intel-BMC/linux.git/atom?h=dev-5.3 2019-10-05T13:11:39+00:00 2019-10-05T13:11:39+00:00 Sudeep Holla sudeep.holla@arm.com 2019-07-08T14:48:36+00:00 urn:sha1:5de4deebd5490b25a1f0ddfbf43f144204264233 [ Upstream commit 9dc34d635c67e57051853855c43249408641a5ab ] Sometimes platfom may take too long to respond to the command and OS might timeout before platform transfer the ownership of the shared memory region to the OS with the response. Since the mailbox channel associated with the channel is freed and new commands are dispatch on the same channel, OS needs to wait until it gets back the ownership. If not, either OS may end up overwriting the platform response for the last command(which is fine as OS timed out that command) or platform might overwrite the payload for the next command with the response for the old. The latter is problematic as platform may end up interpretting the response as the payload. In order to avoid such race, let's wait until the OS gets back the ownership before we prepare the shared memory with the payload for the next command. Reported-by: Jim Quinlan <james.quinlan@broadcom.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 2019-07-20T00:13:56+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-07-20T00:13:56+00:00 urn:sha1:8362fd64f07eaef7155c94fca8dee91c4f99a666 Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms and a couple of the small driver subsystems we merge through our tree: - A driver for SCU (system control) on NXP i.MX8QXP - Qualcomm Always-on Subsystem messaging driver (AOSS QMP) - Qualcomm PM support for MSM8998 - Support for a newer version of DRAM PHY driver for Broadcom (DPFE) - Reset controller support for Bitmain BM1880 - TI SCI (System Control Interface) support for CPU control on AM654 processors - More TI sysc refactoring and rework" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (84 commits) reset: remove redundant null check on pointer dev soc: rockchip: work around clang warning dt-bindings: reset: imx7: Fix the spelling of 'indices' soc: imx: Add i.MX8MN SoC driver support soc: aspeed: lpc-ctrl: Fix probe error handling soc: qcom: geni: Add support for ACPI firmware: ti_sci: Fix gcc unused-but-set-variable warning firmware: ti_sci: Use the correct style for SPDX License Identifier soc: imx8: Use existing of_root directly soc: imx8: Fix potential kernel dump in error path firmware/psci: psci_checker: Park kthreads before stopping them memory: move jedec_ddr.h from include/memory to drivers/memory/ memory: move jedec_ddr_data.c from lib/ to drivers/memory/ MAINTAINERS: Remove myself as qcom maintainer soc: aspeed: lpc-ctrl: make parameter optional soc: qcom: apr: Don't use reg for domain id soc: qcom: fix QCOM_AOSS_QMP dependency and build errors memory: tegra: Fix -Wunused-const-variable firmware: tegra: Early resume BPMP soc/tegra: Select pinctrl for Tegra194 ... 2019-06-19T17:32:31+00:00 Nishad Kamdar nishadkamdar@gmail.com 2019-06-13T14:00:03+00:00 urn:sha1:d2527682160a09e4eb5e9abcf37e83ee5239561a This patch corrects the SPDX License Identifier style in header file related to Firmware Drivers for ARM SCMI Message Protocol. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46 Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2019-06-17T11:54:11+00:00 Olof Johansson olof@lixom.net 2019-06-17T11:54:11+00:00 urn:sha1:df767c0a437c9094ca2d79d37c1c5cf559039f53 ARM SCMI updates/fixes for v5.3 1. Correction to ARM document ID referred in SCMI protocol binding 2. Fix to correct bitfield definitions for SENSOR_DESC attributes which otherwise will calculate sensor values on wrong scale 3. Adds the missing rate_discrete flag setting so that discrete clocks are handled correctly. Without this fix it assumes continuous range which is incorrect 4. Adds support to read and scale the sensor values based on the factor read from the firmware * tag 'scmi-updates-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: hwmon: scmi: Scale values to target desired HWMON units firmware: arm_scmi: fetch and store sensor scale firmware: arm_scmi: update rate_discrete in clock_describe_rates_get firmware: arm_scmi: fix bitfield definitions for SENSOR_DESC attributes dt-bindings: arm: fix the document ID for SCMI protocol documentation Signed-off-by: Olof Johansson <olof@lixom.net> 2019-06-12T11:29:20+00:00 Florian Fainelli f.fainelli@gmail.com 2019-05-08T18:46:34+00:00 urn:sha1:0b673b6486998061b0489b09447ebe8452da0146 In preparation for dealing with scales within the SCMI HWMON driver, fetch and store the sensor unit scale into the scmi_sensor_info structure. In order to simplify computations for upper layer, take care of sign extending the scale to a full 8-bit signed value. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> [sudeep.holla: update bitfield values as per specification] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> 2019-06-12T11:29:16+00:00 Peng Fan peng.fan@nxp.com 2019-05-22T10:15:21+00:00 urn:sha1:c0759b9b5d411ab27c479125cee9bae391a96436 The boolean rate_discrete needs to be assigned to clk->rate_discrete, so that clock driver can distinguish between the continuous range and discrete rates. It uses this in scmi_clk_round_rate could get the rounded value if it's a continuous range. Fixes: 5f6c6430e904 ("firmware: arm_scmi: add initial support for clock protocol") Signed-off-by: Peng Fan <peng.fan@nxp.com> [sudeep.holla: updated commit message] Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> 2019-06-12T11:29:10+00:00 Sudeep Holla sudeep.holla@arm.com 2019-05-14T16:10:31+00:00 urn:sha1:430daaf96ad133be5ce7c3a5c60e94247f7c6f71 As per the SCMI specification the bitfields for SENSOR_DESC attributes are as follows: attributes_low [7:0] Number of trip points supported attributes_high [15:11] The power-of-10 multiplier in 2's-complement format that is applied to the sensor units Looks like the code developed during the draft versions of the specification slipped through and are wrong with respect to final released version. Fix them by adjusting the bitfields appropriately. Fixes: 5179c523c1ea ("firmware: arm_scmi: add initial support for sensor protocol") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> 2019-05-21T08:50:46+00:00 Thomas Gleixner tglx@linutronix.de 2019-05-19T12:07:45+00:00 urn:sha1:ec8f24b7faaf3d4799a7c3f4c1b87f6b02778ad1 Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2019-04-12T17:11:18+00:00 Aditya Pakki pakki001@umn.edu 2019-03-22T21:55:03+00:00 urn:sha1:d9350f21e5fe2614e1f78ef20c3a3e83c4a36391 of_match_device can return NULL if no matching device is found though it's highly unlikely to happen in scmi_probe as it's called only if a valid match is found. However we can use of_device_get_match_data() instead of of_match_device()->data to handle NULL pointer checks and return -EINVAL in such a scenario. Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> 2019-04-12T17:11:18+00:00 Steven Price steven.price@arm.com 2019-03-25T17:37:22+00:00 urn:sha1:fa7fe29a645b4da08efe8ff2392898b88f9ded9f of_parse_phandle_with_args() requires the caller to call of_node_put() on the returned args->np pointer. Otherwise the reference count will remain incremented. However, in this case, since we don't actually use the returned pointer, we can simply pass in NULL. Fixes: aa4f886f3893f ("firmware: arm_scmi: add basic driver infrastructure for SCMI") Signed-off-by: Steven Price <steven.price@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>