BMC/Intel-BMC/linux.git/drivers/dma/dw/core.c, branch dev-4.6

dmaengine: dw: fix master selection

2016-04-13T16:04:31+00:00

The commit 895005202987 ("dmaengine: dw: apply both HS interfaces and remove slave_id usage") cleaned up the code to avoid usage of depricated slave_id member of generic slave configuration. Meanwhile it broke the master selection by removing important call to dwc_set_masters() in ->device_alloc_chan_resources() which copied masters from custom slave configuration to the internal channel structure. Everything works until now since there is no customized connection of DesignWare DMA IP to the bus, i.e. one bus and one or more masters are in use. The configurations where 2 masters are connected to the different masters are not working anymore. We are expecting one user of such configuration and need to select masters properly. Besides that it is obviously a performance regression since only one master is in use in multi-master configuration. Select masters in accordance with what user asked for. Keep this patch in a form more suitable for back porting. We are safe to take necessary data in ->device_alloc_chan_resources() because we don't support generic slave configuration embedded into custom one, and thus the only way to provide such is to use the parameter to a filter function which is called exactly before channel resource allocation. While here, replase BUG_ON to less noisy dev_warn() and prevent channel allocation in case of error. Fixes: 895005202987 ("dmaengine: dw: apply both HS interfaces and remove slave_id usage") Cc: stable@vger.kernel.org Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul

dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer

2016-02-15T16:49:32+00:00

The commit 2895b2cad6e7 ("dmaengine: dw: fix cyclic transfer callbacks") re-enabled BLOCK interrupts with regard to make cyclic transfers work. However, this change becomes a regression for non-cyclic transfers as interrupt counters under stress test had been grown enormously (approximately per 4-5 bytes in the UART loop back test). Taking into consideration above enable BLOCK interrupts if and only if channel is programmed to perform cyclic transfer. Fixes: 2895b2cad6e7 ("dmaengine: dw: fix cyclic transfer callbacks") Signed-off-by: Andy Shevchenko Acked-by: Mans Rullgard Tested-by: Mans Rullgard Acked-by: Viresh Kumar Cc: Signed-off-by: Vinod Koul

Merge tag 'dmaengine-fix-4.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2016-01-20T18:15:21+00:00

Pull dmaengine fixes from Vinod Koul: "Here is my second pull request for this window: A few driver fixes have piled up and one missed rcar bindings patch which got somehow lost in for-linus branch so cherry-picked that one. Fixes are for dw, at_hdmac, edma" * tag 'dmaengine-fix-4.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: rcar-dmac: Document SoC specific bindings dmaengine: at_xdmac: fix resume for cyclic transfers dmaengine: dw: fix cyclic transfer callbacks dmaengine: dw: fix cyclic transfer setup dmaengine: edma: Fix paRAM slot allocation for entry channel 0

dmaengine: dw: fix cyclic transfer callbacks

2016-01-14T05:49:42+00:00

Cyclic transfer callbacks rely on block completion interrupts which were disabled in commit ff7b05f29fd4 ("dmaengine/dw_dmac: Don't handle block interrupts"). This re-enables block interrupts so the cyclic callbacks can work. Other transfer types are not affected as they set the INT_EN bit only on the last block. Fixes: ff7b05f29fd4 ("dmaengine/dw_dmac: Don't handle block interrupts") Signed-off-by: Mans Rullgard Reviewed-by: Viresh Kumar Signed-off-by: Vinod Koul Cc:

dmaengine: dw: fix cyclic transfer setup

2016-01-14T05:49:01+00:00

Commit 61e183f83069 ("dmaengine/dw_dmac: Reconfigure interrupt and chan_cfg register on resume") moved some channel initialisation to a new function which must be called before starting a transfer. This updates dw_dma_cyclic_start() to use dwc_dostart() like the other modes, thus ensuring dwc_initialize() gets called and removing some code duplication. Fixes: 61e183f83069 ("dmaengine/dw_dmac: Reconfigure interrupt and chan_cfg register on resume") Signed-off-by: Mans Rullgard Reviewed-by: Viresh Kumar Signed-off-by: Vinod Koul Cc:

dmaengine: dw: return immediately from IRQ when DMA isn't in use

2016-01-07T13:11:54+00:00

There is no need to bother the hardware when all channels are idle. We have not to get any interrupts. Signed-off-by: Andy Shevchenko Acked-by: Vinod Koul Signed-off-by: Rafael J. Wysocki

Merge tag 'dmaengine-4.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2015-11-10T18:05:17+00:00

Pull dmaengine updates from Vinod Koul: "This time we have a very typical update which is mostly fixes and updates to drivers and no new drivers. - the biggest change is coming from Peter for edma cleanup which even caused some last minute regression, things seem settled now - idma64 and dw updates - iotdma updates - module autoload fixes for various drivers - scatter gather support for hdmac" * tag 'dmaengine-4.4-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (77 commits) dmaengine: edma: Add dummy driver skeleton for edma3-tptc Revert "ARM: DTS: am33xx: Use the new DT bindings for the eDMA3" Revert "ARM: DTS: am437x: Use the new DT bindings for the eDMA3" dmaengine: dw: some Intel devices has no memcpy support dmaengine: dw: platform: provide platform data for Intel dmaengine: dw: don't override platform data with autocfg dmaengine: hdmac: Add scatter-gathered memset support dmaengine: hdmac: factorise memset descriptor allocation dmaengine: virt-dma: Fix kernel-doc annotations ARM: DTS: am437x: Use the new DT bindings for the eDMA3 ARM: DTS: am33xx: Use the new DT bindings for the eDMA3 dmaengine: edma: New device tree binding dmaengine: Kconfig: edma: Select TI_DMA_CROSSBAR in case of ARCH_OMAP dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx dmaengine: edma: Merge the of parsing functions dmaengine: edma: Do not allocate memory for edma_rsv_info in case of DT boot dmaengine: edma: Refactor the dma device and channel struct initialization dmaengine: edma: Get qDMA channel information from HW also dmaengine: edma: Merge map_dmach_to_queue into assign_channel_eventq dmaengine: edma: Correct PaRAM access function names (_parm_ to _param_) ...

dmaengine: dw: some Intel devices has no memcpy support

2015-10-31T02:02:43+00:00

Provide a flag to choose if the device does support memory-to-memory transfers. At least this is not true for iDMA32 controller that might be supported in the future. Besides that Intel BayTrail and Braswell users should not try this feature due to HW specific behaviour. Signed-off-by: Andy Shevchenko Acked-by: Viresh Kumar Signed-off-by: Vinod Koul

dmaengine: dw: don't override platform data with autocfg

2015-10-31T02:02:19+00:00

Let probe driver decide either it wants to auto configure the driver or have explicitly defined properties. Signed-off-by: Andy Shevchenko Acked-by: Viresh Kumar Signed-off-by: Vinod Koul

dmaengine: dw: convert to __ffs()

2015-09-30T08:13:09+00:00

We replace __fls() by __ffs() since we have to find a *minimum* data width that satisfies both source and destination. While here, rename dwc_fast_fls() to dwc_fast_ffs() which it really is. Fixes: 4c2d56c574db (dw_dmac: introduce dwc_fast_fls()) Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul