BMC/Intel-BMC/linux.git/drivers/dma/dmatest.c, branch dev-5.3

Merge tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2019-07-17T16:55:43+00:00

Pull dmaengine updates from Vinod Koul: - Add support in dmaengine core to do device node checks for DT devices and update bunch of drivers to use that and remove open coding from drivers - New driver/driver support for new hardware, namely: - MediaTek UART APDMA - Freescale i.mx7ulp edma2 - Synopsys eDMA IP core version 0 - Allwinner H6 DMA - Updates to axi-dma and support for interleaved cyclic transfers - Greg's debugfs return value check removals on drivers - Updates to stm32-dma, hsu, dw, pl330, tegra drivers * tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits) dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support" dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback Documentation: dmaengine: clean up description of dmatest usage dmaengine: tegra210-adma: remove PM_CLK dependency dmaengine: fsl-edma: add i.mx7ulp edma2 version support dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma dmaengine: fsl-edma-common: version check for v2 instead dmaengine: fsl-edma-common: move dmamux register to another single function dmaengine: fsl-edma: add drvdata for fsl-edma dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver" dmaengine: rcar-dmac: Reject zero-length slave DMA requests dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake dmaengine: dw-edma: fix semicolon.cocci warnings dmaengine: sh: usb-dmac: Use [] to denote a flexible array member dmaengine: dmatest: timeout value of -1 should specify infinite wait dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit dmaengine: fsl-edma: support little endian for edma driver dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width" dmagengine: pl330: add code to get reset property dt-bindings: pl330: document the optional resets property ...

dmaengine: dmatest: timeout value of -1 should specify infinite wait

2019-06-25T04:27:41+00:00

The dmatest module parameter 'timeout' is documented as accepting a -1 to mean "infinite timeout". However, an infinite timeout is not advised, nor possible since the module parameter is an unsigned int, which won't accept a negative value. Change the parameter comment to reflect current behavior, which allows values from 0 up to 4294967295 (0xFFFFFFFF). Signed-off-by: Gary R Hook Signed-off-by: Vinod Koul

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55+00:00

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

Merge tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2019-03-14T16:11:54+00:00

Pull dmaengine updates from Vinod Koul: - dmatest updates for modularizing common struct and code - remove SG support for VDMA xilinx IP and updates to driver - Update to dw driver to support Intel iDMA controllers multi-block support - tegra updates for proper reporting of residue - Add Snow Ridge ioatdma device id and support for IOATDMA v3.4 - struct_size() usage and useless LIST_HEAD cleanups in subsystem. - qDMA controller driver for Layerscape SoCs - stm32-dma PM Runtime support - And usual updates to imx-sdma, sprd, Documentation, fsl-edma, bcm2835, qcom_hidma etc * tag 'dmaengine-5.1-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (81 commits) dmaengine: imx-sdma: fix consistent dma test failures dmaengine: imx-sdma: add a test for imx8mq multi sdma devices dmaengine: imx-sdma: add clock ratio 1:1 check dmaengine: dmatest: move test data alloc & free into functions dmaengine: dmatest: add short-hand `buf_size` var in dmatest_func() dmaengine: dmatest: wrap src & dst data into a struct dmaengine: ioatdma: support latency tolerance report (LTR) for v3.4 dmaengine: ioatdma: add descriptor pre-fetch support for v3.4 dmaengine: ioatdma: disable DCA enabling on IOATDMA v3.4 dmaengine: ioatdma: Add Snow Ridge ioatdma device id dmaengine: sprd: Change channel id to slave id for DMA cell specifier dt-bindings: dmaengine: sprd: Change channel id to slave id for DMA cell specifier dmaengine: mv_xor: Use correct device for DMA API Documentation :dmaengine: clarify DMA desc. pointer after submission Documentation: dmaengine: fix dmatest.rst warning dmaengine: k3dma: Add support for dma-channel-mask dmaengine: k3dma: Delete axi_config dmaengine: k3dma: Upgrade k3dma driver to support hisi_asp_dma hardware Documentation: bindings: dma: Add binding for dma-channel-mask Documentation: bindings: k3dma: Extend the k3dma driver binding to support hisi-asp ...

dmaengine: dmatest: move test data alloc & free into functions

2019-02-25T17:43:50+00:00

This patch starts to take advantage of the `dmatest_data` struct by moving the common allocation & free-ing bits into functions. Signed-off-by: Alexandru Ardelean Signed-off-by: Vinod Koul

dmaengine: dmatest: add short-hand `buf_size` var in dmatest_func()

2019-02-25T17:43:50+00:00

This is just a cosmetic change, since this variable gets used quite a bit inside the dmatest_func() routine. Signed-off-by: Alexandru Ardelean Signed-off-by: Vinod Koul

dmaengine: dmatest: wrap src & dst data into a struct

2019-02-25T17:43:50+00:00

This change wraps the data for the source & destination buffers into a `struct dmatest_data`. The rename patterns are: * src_cnt -> src->cnt * dst_cnt -> dst->cnt * src_off -> src->off * dst_off -> dst->off * thread->srcs -> src->aligned * thread->usrcs -> src->raw * thread->dsts -> dst->aligned * thread->udsts -> dst->raw The intent is to make a function that moves duplicate parts of the code into common alloc & free functions, which will unclutter the `dmatest_func()` function. Signed-off-by: Alexandru Ardelean Signed-off-by: Vinod Koul

dmaengine: dmatest: Abort test in case of mapping error

2019-02-04T09:04:22+00:00

In case of mapping error the DMA addresses are invalid and continuing will screw system memory or potentially something else. [ 222.480310] dmatest: dma0chan7-copy0: summary 1 tests, 3 failures 6 iops 349 KB/s (0) ... [ 240.912725] check: Corrupted low memory at 00000000c7c75ac9 (2940 phys) = 5656000000000000 [ 240.921998] check: Corrupted low memory at 000000005715a1cd (2948 phys) = 279f2aca5595ab2b [ 240.931280] check: Corrupted low memory at 000000002f4024c0 (2950 phys) = 5e5624f349e793cf ... Abort any test if mapping failed. Fixes: 4076e755dbec ("dmatest: convert to dmaengine_unmap_data") Cc: Dan Williams Signed-off-by: Andy Shevchenko Signed-off-by: Vinod Koul

dmaengine: dmatest: Add transfer_size parameter

2018-12-17T06:15:11+00:00

Existing transfer size "len" is either generated randomly or set to the size of test_buf_size. In some cases we need to explicitly specify a transfer size that is different from the buffer size and non aligned to test the target device's ability to handle unaligned transfers. This patch adds optional parameter "transfer_size" to allow setting explicit transfer size for dma transfers. Signed-off-by: Seraj Alijan Signed-off-by: Vinod Koul

dmaengine: dmatest: Add alignment parameter

2018-12-17T06:15:11+00:00

Add parameter "alignment" to allow setting the address alignment manually. Having the ability to configure address alignment from user space adds new testing capabilities where different alignments can be configured for testing without having to modify the dma device alignment properties. If configured, the alignment value will override the device alignment property of the target device. Signed-off-by: Seraj Alijan Signed-off-by: Vinod Koul