BMC/Intel-BMC/linux.git/drivers/clk/meson, branch dev-4.17

clk: meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL

2018-07-28T05:57:13+00:00

commit c987ac6f1f088663b6dad39281071aeb31d450a8 upstream. On Amlogic Meson GXBB & GXL platforms, the SCPI Cortex-M4 Co-Processor seems to be dependent on the FCLK_DIV2 to be operationnal. The issue occurred since v4.17-rc1 by freezing the kernel boot when the 'schedutil' cpufreq governor was selected as default : [ 12.071837] scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version domain-0 init dvfs: 4 [ 12.087757] hctosys: unable to open rtc device (rtc0) [ 12.087907] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 12.102241] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' But when disabling the MMC driver, the boot finished but cpufreq failed to change the CPU frequency : [ 12.153045] cpufreq: __target_index: Failed to change cpu frequency: -5 A bisect between v4.16 and v4.16-rc1 gave 05f814402d61 ("clk: meson: add fdiv clock gates") to be the first bad commit. This commit added support for the missing clock gates before the fixed PLL fixed dividers (FCLK_DIVx) and the clock framework basically disabled all the unused fixed dividers, thus disabled a critical clock path for the SCPI Co-Processor. This patch simply sets the FCLK_DIV2 gate as critical to ensure nobody can disable it. Fixes: 05f814402d61 ("clk: meson: add fdiv clock gates") Signed-off-by: Neil Armstrong Tested-by: Kevin Hilman [few corrections in the commit description] Signed-off-by: Jerome Brunet Signed-off-by: Greg Kroah-Hartman

clk: meson: meson8b: mark fclk_div2 gate clocks as CLK_IS_CRITICAL

2018-07-03T09:27:02+00:00

commit 72e1f2302040398dafb64bbb93abdde78c1f2267 upstream. Until commit 05f814402d6174 ("clk: meson: add fdiv clock gates") we relied on the bootloader to enable the fclk_div clock gates. It turns out that our clock tree is incomplete at least on Meson8b (tested with an Odroid-C1, which uses an RGMII PHY) because after the mentioned commit Ethernet is not working anymore (no RX/TX activity can be seen). At the same time Ethernet was still working on Meson8m2 with a RMII PHY. Testing has shown that as soon as "fclk_div2" is disabled Ethernet stops working on Odroid-C1. Unfortunately it's currently not clear what the Ethernet controller IP block uses the fclk_div2 clock for. Mark the clock as CLK_IS_CRITICAL to keep it enabled (as it's already enabled by most bootloaders by default, which is why we didn't notice it before). Fixes: 05f814402d6174 ("clk: meson: add fdiv clock gates") Cc: stable@vger.kernel.org Signed-off-by: Martin Blumenstingl Tested-by: Kevin Hilman Signed-off-by: Jerome Brunet Signed-off-by: Greg Kroah-Hartman

Merge tag 'meson-clk-fixes-4.17-1' of https://github.com/BayLibre/clk-meson into clk-fixes

2018-05-01T21:44:16+00:00

Pull meson clk fixes from Jerome Brunet: - fix typos in two meson8 clock names - remove unused clock ops declaration * tag 'meson-clk-fixes-4.17-1' of https://github.com/BayLibre/clk-meson: clk: meson: meson8b: fix meson8b_cpu_clk parent clock name clk: meson: meson8b: fix meson8b_fclk_div3_div clock name clk: meson: drop meson_aoclk_gate_regmap_ops

clk: meson: meson8b: fix meson8b_cpu_clk parent clock name

2018-04-25T08:23:19+00:00

meson8b_cpu_clk has two parent clocks: - meson8b_xtal - meson8b_cpu_scale_out_sel The name of the "xtal" clock parent is specified correctly. However, there is a typo in the name of the second parent clock. The meson8b_cpu_scale_out_sel definition uses the name "cpu_scale_out_sel" (which matches the name from the datasheet). However, the mux parent definition uses the name "cpu_out_sel" which does not match any existing clock. Fixes: 251b6fd38bcb9c ("clk: meson: rework meson8b cpu clock") Signed-off-by: Martin Blumenstingl Signed-off-by: Jerome Brunet

clk: meson: meson8b: fix meson8b_fclk_div3_div clock name

2018-04-25T08:21:35+00:00

The names of all fclk divider gate clocks follow the naming schema "fclk_divN" and the name of all fclk fixed dividers follow the naming schema "fclk_divN_div". There's one exception to this rule: meson8b_fclk_div3_div's name is "fclk_div_div3". It's child clock meson8b_fclk_div3 however references it as "fclk_div3_div" (following the naming schema explained above). Fix the naming of the meson8b_fclk_div3_div clock to follow the naming schema. This also fixes serial console on my Meson8m2 board because "clk81" uses fclk_div3 as parent. However, since the hierarchy stops at meson8b_fclk_div3 there's no known parent clock and the rate of "clk81" and all of it's children (UART clock, SDIO MMC controller clock, ...) are all 0. Fixes: 05f814402d6174 ("clk: meson: add fdiv clock gates") Signed-off-by: Martin Blumenstingl Signed-off-by: Jerome Brunet

clk: meson: drop meson_aoclk_gate_regmap_ops

2018-04-25T08:19:26+00:00

let's remove the unused meson_aoclk_gate_regmap_ops Fixes: 1f932d99710d ("clk: meson: remove superseded aoclk_gate_regmap") Signed-off-by: Yixun Lan Signed-off-by: Jerome Brunet

clk: meson: honor CLK_MUX_ROUND_CLOSEST in clk_regmap

2018-04-16T16:25:09+00:00

Using __clk_mux_determine_rate effectively ignores CLK_MUX_ROUND_CLOSEST if set the related clk_regmap mux instance. Use clk_mux_determine_rate_flags() to make sure the flag is honored. Fixes: ea11dda9e091 ("clk: meson: add regmap clocks") Signed-off-by: Jerome Brunet Signed-off-by: Stephen Boyd

clk: meson: Drop unused local variable and add static

2018-03-14T22:36:31+00:00

Fixes the following warnings: drivers/clk/meson/meson8b.c:512:19: warning: symbol 'meson8b_mpeg_clk_div' was not declared. Should it be static? drivers/clk/meson/meson8b.c:526:19: warning: symbol 'meson8b_clk81' was not declared. Should it be static? drivers/clk/meson/meson8b.c:540:19: warning: symbol 'meson8b_cpu_in_sel' was not declared. Should it be static? drivers/clk/meson/meson8b.c:591:19: warning: symbol 'meson8b_cpu_scale_div' was not declared. Should it be static? drivers/clk/meson/meson8b.c:608:19: warning: symbol 'meson8b_cpu_scale_out_sel' was not declared. Should it be static? drivers/clk/meson/meson8b.c:626:19: warning: symbol 'meson8b_cpu_clk' was not declared. Should it be static? drivers/clk/meson/gxbb.c:392:27: warning: symbol 'gxbb_gp0_init_regs' was not declared. Should it be static? drivers/clk/meson/gxbb.c:439:27: warning: symbol 'gxl_gp0_init_regs' was not declared. Should it be static? drivers/clk/meson/axg.c:195:27: warning: symbol 'axg_gp0_init_regs' was not declared. Should it be static? drivers/clk/meson/axg.c:248:27: warning: symbol 'axg_hifi_init_regs' was not declared. Should it be static? drivers/clk/meson/meson8b.c: In function 'meson8b_clkc_probe': drivers/clk/meson/meson8b.c:1052:14: warning: unused variable 'clk' [-Wunused-variable] Signed-off-by: Stephen Boyd

clk: meson: clean-up clk81 clocks

2018-03-13T09:10:00+00:00

clk81 is a composite clock which parents all the peripheral clocks of the platform. It is a critical clock which is used as provided by the bootloader. We don't want to change its rate or reparent it, ever. Remove the CLK_IGNORE_UNUSED on the mux and divider. These clock can't gate so the flag is useless, and the gate is already critical, so the clock won't ever be unused. Remove CLK_SET_RATE_NO_REPARENT from mux, it is useless since the mux is read-only. Remove CLK_SET_RATE_PARENT from the gate and divider and use ro_ops for the divider. A peripheral clock should not try to change the rate of clk81. Stopping the rate propagation is good way to make sure such request would be ignored. Signed-off-by: Jerome Brunet Signed-off-by: Neil Armstrong

clk: meson: add fdiv clock gates

2018-03-13T09:09:58+00:00

Fdiv fixed dividers clocks of the fixed_pll can actually gate independently. We never had an issue so far because these clocks were provided 'enabled' by the bootloader. Add these gates to enable/disable the clocks when required. Signed-off-by: Jerome Brunet Signed-off-by: Neil Armstrong