BMC/Intel-BMC/linux.git/drivers/base, branch dev-5.15-intel

net: mdio: don't defer probe forever if PHY IRQ provider is missing

2022-04-20T07:34:10+00:00

[ Upstream commit 74befa447e6839cdd90ed541159ec783726946f9 ] When a driver for an interrupt controller is missing, of_irq_get() returns -EPROBE_DEFER ad infinitum, causing fwnode_mdiobus_phy_device_register(), and ultimately, the entire of_mdiobus_register() call, to fail. In turn, any phy_connect() call towards a PHY on this MDIO bus will also fail. This is not what is expected to happen, because the PHY library falls back to poll mode when of_irq_get() returns a hard error code, and the MDIO bus, PHY and attached Ethernet controller work fine, albeit suboptimally, when the PHY library polls for link status. However, -EPROBE_DEFER has special handling given the assumption that at some point probe deferral will stop, and the driver for the supplier will kick in and create the IRQ domain. Reasons for which the interrupt controller may be missing: - It is not yet written. This may happen if a more recent DT blob (with an interrupt-parent for the PHY) is used to boot an old kernel where the driver didn't exist, and that kernel worked with the vintage-correct DT blob using poll mode. - It is compiled out. Behavior is the same as above. - It is compiled as a module. The kernel will wait for a number of seconds specified in the "deferred_probe_timeout" boot parameter for user space to load the required module. The current default is 0, which times out at the end of initcalls. It is possible that this might cause regressions unless users adjust this boot parameter. The proposed solution is to use the driver_deferred_probe_check_state() helper function provided by the driver core, which gives up after some -EPROBE_DEFER attempts, taking "deferred_probe_timeout" into consideration. The return code is changed from -EPROBE_DEFER into -ENODEV or -ETIMEDOUT, depending on whether the kernel is compiled with support for modules or not. Fixes: 66bdede495c7 ("of_mdio: Fix broken PHY IRQ in case of probe deferral") Suggested-by: Robin Murphy Signed-off-by: Vladimir Oltean Acked-by: Greg Kroah-Hartman Reviewed-by: Florian Fainelli Link: https://lore.kernel.org/r/20220407165538.4084809-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin

rtc: Check return value from mc146818_get_time()

2022-04-13T18:59:14+00:00

[ Upstream commit 0dd8d6cb9eddfe637bcd821bbfd40ebd5a0737b9 ] There are 4 users of mc146818_get_time() and none of them was checking the return value from this function. Change this. Print the appropriate warnings in callers of mc146818_get_time() instead of in the function mc146818_get_time() itself, in order not to add strings to rtc-mc146818-lib.c, which is kind of a library. The callers of alpha_rtc_read_time() and cmos_read_time() may use the contents of (struct rtc_time *) even when the functions return a failure code. Therefore, set the contents of (struct rtc_time *) to 0x00, which looks more sensible then 0xff and aligns with the (possibly stale?) comment in cmos_read_time: /* * If pm_trace abused the RTC for storage, set the timespec to 0, * which tells the caller that this RTC value is unusable. */ For consistency, do this in mc146818_get_time(). Note: hpet_rtc_interrupt() may call mc146818_get_time() many times a second. It is very unlikely, though, that the RTC suddenly stops working and mc146818_get_time() would consistently fail. Only compile-tested on alpha. Signed-off-by: Mateusz Jończyk Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Borislav Petkov Cc: Dave Hansen Cc: Alessandro Zummo Cc: Alexandre Belloni Cc: linux-alpha@vger.kernel.org Cc: x86@kernel.org Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20211210200131.153887-4-mat.jonczyk@o2.pl Signed-off-by: Sasha Levin

PM: core: keep irq flags in device_pm_check_callbacks()

2022-04-08T12:23:56+00:00

[ Upstream commit 524bb1da785a7ae43dd413cd392b5071c6c367f8 ] The function device_pm_check_callbacks() can be called under the spin lock (in the reported case it happens from genpd_add_device() -> dev_pm_domain_set(), when the genpd uses spinlocks rather than mutexes. However this function uncoditionally uses spin_lock_irq() / spin_unlock_irq(), thus not preserving the CPU flags. Use the irqsave/irqrestore instead. The backtrace for the reference: [ 2.752010] ------------[ cut here ]------------ [ 2.756769] raw_local_irq_restore() called with IRQs enabled [ 2.762596] WARNING: CPU: 4 PID: 1 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x34/0x50 [ 2.772338] Modules linked in: [ 2.775487] CPU: 4 PID: 1 Comm: swapper/0 Tainted: G S 5.17.0-rc6-00384-ge330d0d82eff-dirty #684 [ 2.781384] Freeing initrd memory: 46024K [ 2.785839] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.785841] pc : warn_bogus_irq_restore+0x34/0x50 [ 2.785844] lr : warn_bogus_irq_restore+0x34/0x50 [ 2.785846] sp : ffff80000805b7d0 [ 2.785847] x29: ffff80000805b7d0 x28: 0000000000000000 x27: 0000000000000002 [ 2.785850] x26: ffffd40e80930b18 x25: ffff7ee2329192b8 x24: ffff7edfc9f60800 [ 2.785853] x23: ffffd40e80930b18 x22: ffffd40e80930d30 x21: ffff7edfc0dffa00 [ 2.785856] x20: ffff7edfc09e3768 x19: 0000000000000000 x18: ffffffffffffffff [ 2.845775] x17: 6572206f74206465 x16: 6c696166203a3030 x15: ffff80008805b4f7 [ 2.853108] x14: 0000000000000000 x13: ffffd40e809550b0 x12: 00000000000003d8 [ 2.860441] x11: 0000000000000148 x10: ffffd40e809550b0 x9 : ffffd40e809550b0 [ 2.867774] x8 : 00000000ffffefff x7 : ffffd40e809ad0b0 x6 : ffffd40e809ad0b0 [ 2.875107] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000 [ 2.882440] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff7edfc03a8000 [ 2.889774] Call trace: [ 2.892290] warn_bogus_irq_restore+0x34/0x50 [ 2.896770] _raw_spin_unlock_irqrestore+0x94/0xa0 [ 2.901690] genpd_unlock_spin+0x20/0x30 [ 2.905724] genpd_add_device+0x100/0x2d0 [ 2.909850] __genpd_dev_pm_attach+0xa8/0x23c [ 2.914329] genpd_dev_pm_attach_by_id+0xc4/0x190 [ 2.919167] genpd_dev_pm_attach_by_name+0x3c/0xd0 [ 2.924086] dev_pm_domain_attach_by_name+0x24/0x30 [ 2.929102] psci_dt_attach_cpu+0x24/0x90 [ 2.933230] psci_cpuidle_probe+0x2d4/0x46c [ 2.937534] platform_probe+0x68/0xe0 [ 2.941304] really_probe.part.0+0x9c/0x2fc [ 2.945605] __driver_probe_device+0x98/0x144 [ 2.950085] driver_probe_device+0x44/0x15c [ 2.954385] __device_attach_driver+0xb8/0x120 [ 2.958950] bus_for_each_drv+0x78/0xd0 [ 2.962896] __device_attach+0xd8/0x180 [ 2.966843] device_initial_probe+0x14/0x20 [ 2.971144] bus_probe_device+0x9c/0xa4 [ 2.975092] device_add+0x380/0x88c [ 2.978679] platform_device_add+0x114/0x234 [ 2.983067] platform_device_register_full+0x100/0x190 [ 2.988344] psci_idle_init+0x6c/0xb0 [ 2.992113] do_one_initcall+0x74/0x3a0 [ 2.996060] kernel_init_freeable+0x2fc/0x384 [ 3.000543] kernel_init+0x28/0x130 [ 3.004132] ret_from_fork+0x10/0x20 [ 3.007817] irq event stamp: 319826 [ 3.011404] hardirqs last enabled at (319825): [] __up_console_sem+0x78/0x84 [ 3.020332] hardirqs last disabled at (319826): [] el1_dbg+0x24/0x8c [ 3.028458] softirqs last enabled at (318312): [] _stext+0x410/0x588 [ 3.036678] softirqs last disabled at (318299): [] __irq_exit_rcu+0x158/0x174 [ 3.045607] ---[ end trace 0000000000000000 ]--- Signed-off-by: Dmitry Baryshkov Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

driver core: dd: fix return value of __setup handler

2022-04-08T12:23:50+00:00

[ Upstream commit f2aad54703dbe630f9d8b235eb58e8c8cc78f37d ] When "driver_async_probe=nulltty" is used on the kernel boot command line, it causes an Unknown parameter message and the string is added to init's environment strings, polluting them. Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc6 driver_async_probe=nulltty", will be passed to user space. Run /sbin/init as init process with arguments: /sbin/init with environment: HOME=/ TERM=linux BOOT_IMAGE=/boot/bzImage-517rc6 driver_async_probe=nulltty Change the return value of the __setup function to 1 to indicate that the __setup option has been handled. Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Fixes: 1ea61b68d0f8 ("async: Add cmdline option to specify drivers to be async probed") Cc: Feng Tang Cc: Greg Kroah-Hartman Cc: "Rafael J. Wysocki" Reported-by: Igor Zhbanov Reviewed-by: Feng Tang Signed-off-by: Randy Dunlap Link: https://lore.kernel.org/r/20220301041829.15137-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

drivers/base/memory: add memory block to memory group after registration succeeded

2022-04-08T12:23:12+00:00

[ Upstream commit 7ea0d2d79da09d1f7d71c96a9c9bc1b5229360b5 ] If register_memory() fails, we freed the memory block but already added the memory block to the group list, not good. Let's defer adding the block to the memory group to after registering the memory block device. We do handle it properly during unregister_memory(), but that's not called when the registration fails. Link: https://lkml.kernel.org/r/20220128144540.153902-1-david@redhat.com Fixes: 028fc57a1c36 ("drivers/base/memory: introduce "memory groups" to logically group memory blocks") Signed-off-by: David Hildenbrand Reviewed-by: Oscar Salvador Acked-by: Michal Hocko Cc: Greg Kroah-Hartman Cc: "Rafael J. Wysocki" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

PM: domains: Fix sleep-in-atomic bug caused by genpd_debug_remove()

2022-04-08T12:23:02+00:00

commit f6bfe8b5b2c2a5ac8bd2fc7bca3706e6c3fc26d8 upstream. When a genpd with GENPD_FLAG_IRQ_SAFE gets removed, the following sleep-in-atomic bug will be seen, as genpd_debug_remove() will be called with a spinlock being held. [ 0.029183] BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:1460 [ 0.029204] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 1, name: swapper/0 [ 0.029219] preempt_count: 1, expected: 0 [ 0.029230] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.17.0-rc4+ #489 [ 0.029245] Hardware name: Thundercomm TurboX CM2290 (DT) [ 0.029256] Call trace: [ 0.029265] dump_backtrace.part.0+0xbc/0xd0 [ 0.029285] show_stack+0x3c/0xa0 [ 0.029298] dump_stack_lvl+0x7c/0xa0 [ 0.029311] dump_stack+0x18/0x34 [ 0.029323] __might_resched+0x10c/0x13c [ 0.029338] __might_sleep+0x4c/0x80 [ 0.029351] down_read+0x24/0xd0 [ 0.029363] lookup_one_len_unlocked+0x9c/0xcc [ 0.029379] lookup_positive_unlocked+0x10/0x50 [ 0.029392] debugfs_lookup+0x68/0xac [ 0.029406] genpd_remove.part.0+0x12c/0x1b4 [ 0.029419] of_genpd_remove_last+0xa8/0xd4 [ 0.029434] psci_cpuidle_domain_probe+0x174/0x53c [ 0.029449] platform_probe+0x68/0xe0 [ 0.029462] really_probe+0x190/0x430 [ 0.029473] __driver_probe_device+0x90/0x18c [ 0.029485] driver_probe_device+0x40/0xe0 [ 0.029497] __driver_attach+0xf4/0x1d0 [ 0.029508] bus_for_each_dev+0x70/0xd0 [ 0.029523] driver_attach+0x24/0x30 [ 0.029534] bus_add_driver+0x164/0x22c [ 0.029545] driver_register+0x78/0x130 [ 0.029556] __platform_driver_register+0x28/0x34 [ 0.029569] psci_idle_init_domains+0x1c/0x28 [ 0.029583] do_one_initcall+0x50/0x1b0 [ 0.029595] kernel_init_freeable+0x214/0x280 [ 0.029609] kernel_init+0x2c/0x13c [ 0.029622] ret_from_fork+0x10/0x20 It doesn't seem necessary to call genpd_debug_remove() with the lock, so move it out from locking to fix the problem. Fixes: 718072ceb211 ("PM: domains: create debugfs nodes when adding power domains") Signed-off-by: Shawn Guo Reviewed-by: Ulf Hansson Cc: 5.11+ # 5.11+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

driver core: Free DMA range map when device is released

2022-03-02T10:48:07+00:00

commit d8f7a5484f2188e9af2d9e4e587587d724501b12 upstream. When unbinding/binding a driver with DMA mapped memory, the DMA map is not freed before the driver is reloaded. This leads to a memory leak when the DMA map is overwritten when reprobing the driver. This can be reproduced with a platform driver having a dma-range: dummy { ... #address-cells = <0x2>; #size-cells = <0x2>; ranges; dma-ranges = <...>; ... }; and then unbinding/binding it: ~# echo soc:dummy >/sys/bus/platform/drivers//unbind DMA map object 0xffffff800b0ae540 still being held by &pdev->dev ~# echo soc:dummy >/sys/bus/platform/drivers//bind ~# echo scan > /sys/kernel/debug/kmemleak ~# cat /sys/kernel/debug/kmemleak unreferenced object 0xffffff800b0ae540 (size 64): comm "sh", pid 833, jiffies 4295174550 (age 2535.352s) hex dump (first 32 bytes): 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 80 00 00 00 00 00 00 00 80 00 00 00 00 ................ backtrace: [] create_object.isra.0+0x108/0x344 [] kmemleak_alloc+0x8c/0xd0 [] __kmalloc+0x440/0x6f0 [] of_dma_get_range+0x124/0x220 [] of_dma_configure_id+0x40/0x2d0 [] platform_dma_configure+0x5c/0xa4 [] really_probe+0x8c/0x514 [] __driver_probe_device+0x9c/0x19c [] device_driver_attach+0x54/0xbc [] bind_store+0xc4/0x120 [] drv_attr_store+0x30/0x44 [] sysfs_kf_write+0x50/0x60 [] kernfs_fop_write_iter+0x124/0x1b4 [] new_sync_write+0xdc/0x160 [] vfs_write+0x23c/0x2a0 [] ksys_write+0x64/0xec To prevent this we should free the dma_range_map when the device is released. Fixes: e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset") Cc: stable Suggested-by: Rob Herring Reviewed-by: Rob Herring Signed-off-by: Mårten Lindahl Link: https://lore.kernel.org/r/20220216094128.4025861-1-marten.lindahl@axis.com Signed-off-by: Greg Kroah-Hartman

regmap-irq: Update interrupt clear register for proper reset

2022-03-02T10:48:01+00:00

[ Upstream commit d04ad245d67a3991dfea5e108e4c452c2ab39bac ] With the existing logic where clear_ack is true (HW doesn’t support auto clear for ICR), interrupt clear register reset is not handled properly. Due to this only the first interrupts get processed properly and further interrupts are blocked due to not resetting interrupt clear register. Example for issue case where Invert_ack is false and clear_ack is true: Say Default ISR=0x00 & ICR=0x00 and ISR is triggered with 2 interrupts making ISR = 0x11. Step 1: Say ISR is set 0x11 (store status_buff = ISR). ISR needs to be cleared with the help of ICR once the Interrupt is processed. Step 2: Write ICR = 0x11 (status_buff), this will clear the ISR to 0x00. Step 3: Issue - In the existing code, ICR is written with ICR = ~(status_buff) i.e ICR = 0xEE -> This will block all the interrupts from raising except for interrupts 0 and 4. So expectation here is to reset ICR, which will unblock all the interrupts. if (chip->clear_ack) { if (chip->ack_invert && !ret) ........ else if (!ret) ret = regmap_write(map, reg, ~data->status_buf[i]); So writing 0 and 0xff (when ack_invert is true) should have no effect, other than clearing the ACKs just set. Fixes: 3a6f0fb7b8eb ("regmap: irq: Add support to clear ack registers") Signed-off-by: Prasad Kumpatla Reviewed-by: Charles Keepax Tested-by: Marek Szyprowski Link: https://lore.kernel.org/r/20220217085007.30218-1-quic_pkumpatl@quicinc.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

PM: s2idle: ACPI: Fix wakeup interrupts handling

2022-02-16T11:56:19+00:00

commit cb1f65c1e1424a4b5e4a86da8aa3b8fd8459c8ec upstream. After commit e3728b50cd9b ("ACPI: PM: s2idle: Avoid possible race related to the EC GPE") wakeup interrupts occurring immediately after the one discarded by acpi_s2idle_wake() may be missed. Moreover, if the SCI triggers again immediately after the rearming in acpi_s2idle_wake(), that wakeup may be missed too. The problem is that pm_system_irq_wakeup() only calls pm_system_wakeup() when pm_wakeup_irq is 0, but that's not the case any more after the interrupt causing acpi_s2idle_wake() to run until pm_wakeup_irq is cleared by the pm_wakeup_clear() call in s2idle_loop(). However, there may be wakeup interrupts occurring in that time frame and if that happens, they will be missed. To address that issue first move the clearing of pm_wakeup_irq to the point at which it is known that the interrupt causing acpi_s2idle_wake() to tun will be discarded, before rearming the SCI for wakeup. Moreover, because that only reduces the size of the time window in which the issue may manifest itself, allow pm_system_irq_wakeup() to register two second wakeup interrupts in a row and, when discarding the first one, replace it with the second one. [Of course, this assumes that only one wakeup interrupt can be discarded in one go, but currently that is the case and I am not aware of any plans to change that.] Fixes: e3728b50cd9b ("ACPI: PM: s2idle: Avoid possible race related to the EC GPE") Cc: 5.4+ # 5.4+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

device property: Fix fwnode_graph_devcon_match() fwnode leak

2022-01-27T10:05:10+00:00

commit 4a7f4110f79163fd53ea65438041994ed615e3af upstream. For each endpoint it encounters, fwnode_graph_devcon_match() checks whether the endpoint's remote port parent device is available. If it is not, it ignores the endpoint but does not put the reference to the remote endpoint port parent fwnode. For available devices the fwnode handle reference is put as expected. Put the reference for unavailable devices now. Fixes: 637e9e52b185 ("device connection: Find device connections also from device graphs") Cc: 5.1+ # 5.1+ Signed-off-by: Sakari Ailus Reviewed-by: Andy Shevchenko Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman