BMC/Intel-BMC/linux.git/drivers/ata/libahci.c, branch dev-4.6

libahci: save port map for forced port map

2016-04-01T14:30:30+00:00

In usecases where force_port_map is used saved_port_map is never set, resulting in not programming the PORTS_IMPL register as part of initial config. This patch fixes this by setting it to port_map even in case where force_port_map is used, making it more inline with other parts of the code. Fixes: 566d1827df2e ("libata: disable forced PORTS_IMPL for >= AHCI 1.3") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Srinivas Kandagatla Acked-by: Tejun Heo Reviewed-by: Andy Gross Signed-off-by: Tejun Heo

Merge branch 'for-4.5-fixes' into for-4.6

2016-03-11T17:30:17+00:00

ata: ahci: don't mark HotPlugCapable Ports as external/removable

2016-02-29T21:17:57+00:00

The HPCP bit is set by bioses for on-board sata ports either because they think sata is hotplug capable in general or to allow Windows to display a "device eject" icon on ports which are routed to an external connector bracket. However in Redhat Bugzilla #1310682, users report that with kernel 4.4, where this bit test first appeared, a lot of partitions on sata drives are now mounted automatically. This patch should fix redhat and a lot of other distros which unconditionally automount all devices which have the "removable" bit set. Signed-off-by: Manuel Lauss Signed-off-by: Tejun Heo Fixes: 8a3e33cf92c7 ("ata: ahci: find eSATA ports and flag them as removable" changes userspace behavior) Link: http://lkml.kernel.org/g/56CF35FA.1070500@redhat.com Cc: stable@vger.kernel.org #v4.4+

ahci: Add functions to manage runtime PM of AHCI ports

2016-02-19T15:52:46+00:00

Add new functions ahci_rpm_get_port()/ahci_rpm_put_port() that change runtime PM status of AHCI ports. Depending if the AHCI host has runtime PM enabled or disabled calling these may trigger runtime suspend/resume of the host controller. We also call these functions in appropriate places to make sure host controller registers are available before using them. Signed-off-by: Mika Westerberg Signed-off-by: Tejun Heo

ahci: Cache host controller version

2016-02-19T15:52:46+00:00

This allows sysfs nodes to read the cached value directly instead of powering up possibly runtime suspended controller. Signed-off-by: Mika Westerberg Signed-off-by: Tejun Heo

ata: Remove the AHCI_HFLAG_EDGE_IRQ support from libahci.

2016-02-11T14:54:04+00:00

The flexibility to override the irq handles in the LLD's are already present, so controllers implementing a edge trigger latch can implement their own interrupt handler inside the driver. This patch removes the AHCI_HFLAG_EDGE_IRQ support from libahci and moves edge irq handling to ahci_xgene. tj: Minor update to description. Signed-off-by: Suman Tripathi Signed-off-by: Tejun Heo

libahci: Implement the capability to override the generic ahci interrupt handler.

2016-02-11T14:53:51+00:00

This patch implements the capability to override the generic AHCI interrupt handler so that specific ahci drivers can implement their own custom interrupt handler routines. It also exports ahci_handle_port_intr so that custom irq_handler implementations can use it. tj: s/ahci_irq_handler/irq_handler/ and updated description. Signed-off-by: Suman Tripathi Signed-off-by: Tejun Heo

libata: disable forced PORTS_IMPL for >= AHCI 1.3

2016-01-25T20:45:55+00:00

Some early controllers incorrectly reported zero ports in PORTS_IMPL register and the ahci driver fabricates PORTS_IMPL from the number of ports in those cases. This hasn't mattered but with the new nvme controllers there are cases where zero PORTS_IMPL is valid and should be honored. Disable the workaround for >= AHCI 1.3. Signed-off-by: Tejun Heo Reported-by: Andy Lutomirski Link: http://lkml.kernel.org/g/CALCETrU7yMvXEDhjAUShoHEhDwifJGapdw--BKxsP0jmjKGmRw@mail.gmail.com Cc: Sergei Shtylyov Cc: stable@vger.kernel.org

drivers: ata: wake port before DMA stop for ALPM

2016-01-25T20:20:44+00:00

The AHCI driver code stops and starts port DMA engines at will without considering the power state of the particular port. The AHCI specification isn't very clear on how to handle this scenario, leaving implementation open to interpretation. Broadcom's STB SATA host controller is unable to handle port DMA controller restarts when the port in question is in low power mode. When a port enters partial or slumber mode, its PHY is powered down. When a controller restart is requested, the controller's internal state machine expects the PHY to be brought back up by software which never happens in this case, resulting in failures. To avoid this situation, logic is added to manually wake up the port just before its DMA engine is stopped, if the port happens to be in a low power state. HBA initiated power management ensures that the port eventually returns to its configured low power state, when the link is idle (as per the conditions listed in the spec). A new host flag is also added to ensure this logic is only exercised for hosts with the above limitation. tj: Formatting changes. Signed-off-by: Danesh Petigara Reviewed-by: Markus Mayer Signed-off-by: Tejun Heo

Merge branch 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

2016-01-12T03:33:59+00:00

Pull libata updates from Tejun Heo: "Mostly low level driver specific changes. Two changes are somewhat noteworthy. First, Dan's patchset to support per-port msix interrupt handling for ahci, which was tried last cycle but had to be backed out due to a couple issues, is back and seems to be working fine. Second, libata exception handling now uses usleep_range() instead of msleep() for sleeps < 20ms which can make things snappier in some corner cases" * 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: skip debounce delay on link resume ata: ahci_brcmstb: disable DIPM support ata: ahci_brcmstb: enable support for ALPM drivers: libata-core: Use usleep_range() instead of msleep() for short sleeps (<20 ms) sata_sx4: correctly handling failed allocation ata: ahci_brcmstb: add support for MIPS-based platforms ahci: qoriq: Adjust the default register values on ls1021a ahci: qoriq: Update the default Rx watermark value ahci: qoriq: Adjust the default register values on ls1043a ahci: compile out msi/msix infrastructure ata: core: fix irq description on AHCI single irq systems ata: ahci_brcmstb: remove unused definitions ata: ahci_brcmstb: add a quirk for MIPS-based platforms ata: ahci_brcmstb: disable NCQ for MIPS-based platforms ata: sata_rcar: Remove obsolete platform_device_id entries sata_rcar: Add compatible string for r8a7795 ahci: kill 'intr_status' ahci: switch from 'threaded' to 'hardirq' interrupt handling ahci: per-port msix support