BMC/Intel-BMC/linux.git/drivers/acpi/pci_root.c, branch dev-4.19

Merge branch 'pci/hotplug'

2018-06-06T21:10:10+00:00

- fix use-before-set error in ibmphp (Dan Carpenter) - fix pciehp timeouts caused by Command Completed errata (Bjorn Helgaas) - fix refcounting in pnv_php hotplug (Julia Lawall) - clear pciehp Presence Detect and Data Link Layer Status Changed on resume so we don't miss hotplug events (Mika Westerberg) - only request pciehp control if we support it, so platform can use ACPI hotplug otherwise (Mika Westerberg) - convert SHPC to be builtin only (Mika Westerberg) - request SHPC control via _OSC if we support it (Mika Westerberg) - simplify SHPC handoff from firmware (Mika Westerberg) * pci/hotplug: PCI: Improve "partially hidden behind bridge" log message PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc PCI: Move resource distribution for single bridge outside loop PCI: Account for all bridges on bus when distributing bus numbers ACPI / hotplug / PCI: Drop unnecessary parentheses ACPI / hotplug / PCI: Mark stale PCI devices disconnected ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug PCI: hotplug: Add hotplug_is_native() PCI: shpchp: Add shpchp_is_native() PCI: shpchp: Fix AMD POGO identification PCI: shpchp: Use dev_printk() for OSHP-related messages PCI: shpchp: Remove get_hp_hw_control_from_firmware() wrapper PCI: shpchp: Remove acpi_get_hp_hw_control_from_firmware() flags PCI: shpchp: Rely on previous _OSC results PCI: shpchp: Request SHPC control via _OSC when adding host bridge PCI: shpchp: Convert SHPC to be builtin only PCI: pciehp: Make pciehp_is_native() stricter PCI: pciehp: Rename host->native_hotplug to host->native_pcie_hotplug PCI: pciehp: Request control of native hotplug only if supported PCI: pciehp: Clear Presence Detect and Data Link Layer Status Changed on resume PCI: pnv_php: Add missing of_node_put() PCI: pciehp: Add quirk for Command Completed errata PCI: Add Qualcomm vendor ID PCI: ibmphp: Fix use-before-set in get_max_bus_speed() # Conflicts: # drivers/acpi/pci_root.c

PCI: shpchp: Request SHPC control via _OSC when adding host bridge

2018-06-02T05:18:28+00:00

The SHPC driver now must be builtin (it cannot be a module). If it is present, request SHPC control immediately when adding the ACPI host bridge. This is similar to how we handle native PCIe hotplug via pciehp. Suggested-by: Bjorn Helgaas Signed-off-by: Mika Westerberg [bhelgaas: split to separate patch] Signed-off-by: Bjorn Helgaas Reviewed-by: Rafael J. Wysocki

PCI: pciehp: Rename host->native_hotplug to host->native_pcie_hotplug

2018-06-02T05:18:28+00:00

Rename host->native_hotplug to host->native_pcie_hotplug to make room for a similar flag for SHPC hotplug. Suggested-by: Bjorn Helgaas Signed-off-by: Mika Westerberg [bhelgaas: split to separate patch] Signed-off-by: Bjorn Helgaas

PCI: pciehp: Request control of native hotplug only if supported

2018-05-23T22:42:53+00:00

Currently we request control of native PCIe hotplug unconditionally. Native PCIe hotplug events are handled by the pciehp driver, and if it is not enabled those events will be lost. Request control of native PCIe hotplug only if the pciehp driver is enabled, so we will actually handle native PCIe hotplug events. Suggested-by: Bjorn Helgaas Signed-off-by: Mika Westerberg Signed-off-by: Bjorn Helgaas Reviewed-by: Rafael J. Wysocki

PCI/ACPI: Request LTR control from platform before using it

2018-04-23T13:18:44+00:00

Per the PCI Firmware spec r3.2, sec 4.5, an ACPI-based OS should use _OSC to request control of Latency Tolerance Reporting (LTR) before using it. Request control of LTR, and if the platform does not grant control, don't use it. N.B. If the hardware supports LTR and the ASPM L1.2 substate but the BIOS doesn't support LTR in _OSC, we previously would enable ASPM L1.2. This patch will prevent us from enabling ASPM L1.2 in that case. It does not prevent us from enabling PCI-PM L1.2, since that doesn't depend on LTR. See PCIe r40, sec 5.5.1, for the L1 PM substate entry conditions. Signed-off-by: Bjorn Helgaas Reviewed-by: Rafael J. Wysocki

Merge branch 'pci/portdrv'

2018-04-04T18:27:58+00:00

- move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick Lawler) - merge pcieport_if.h into portdrv.h (Bjorn Helgaas) - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn Helgaas) - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas) - remove portdrv link order dependency (Bjorn Helgaas) - remove support for unused VC portdrv service (Bjorn Helgaas) - simplify portdrv feature permission checking (Bjorn Helgaas) - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn Helgaas) - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas) - use cached AER capability offset (Frederick Lawler) - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg) - rename pcie-dpc.c to dpc.c (Bjorn Helgaas) * pci/portdrv: PCI/DPC: Rename from pcie-dpc.c to dpc.c PCI/DPC: Do not enable DPC if AER control is not allowed by the BIOS PCI/AER: Use cached AER Capability offset PCI/portdrv: Rename and reverse sense of pcie_ports_auto PCI/portdrv: Encapsulate pcie_ports_auto inside the port driver PCI/portdrv: Remove unnecessary "pcie_ports=auto" parameter PCI/portdrv: Remove "pcie_hp=nomsi" kernel parameter PCI/portdrv: Remove unnecessary include of PCI/portdrv: Simplify PCIe feature permission checking PCI/portdrv: Remove unused PCIE_PORT_SERVICE_VC PCI/portdrv: Remove pcie_port_bus_type link order dependency PCI/portdrv: Disable port driver in compat mode PCI/PM: Clear PCIe PME Status bit for Root Complex Event Collectors PCI/PM: Clear PCIe PME Status bit in core, not PCIe port driver PCI/PM: Move pcie_clear_root_pme_status() to core PCI/portdrv: Merge pcieport_if.h into portdrv.h PCI/portdrv: Move pcieport_if.h to drivers/pci/pcie/ Conflicts: drivers/pci/pcie/Makefile drivers/pci/pcie/portdrv.h

PCI: Add fwnode handler as input param of pci_register_io_range()

2018-04-04T13:42:45+00:00

In preparation for having the PCI MMIO helpers use the new generic I/O space management (logical PIO) we need to add the fwnode handler as an extra input parameter. Changes the signature of pci_register_io_range() and its callers as needed. Tested-by: dann frazier Signed-off-by: Gabriele Paoloni Signed-off-by: Bjorn Helgaas Reviewed-by: Andy Shevchenko Acked-by: Rob Herring

PCI/portdrv: Simplify PCIe feature permission checking

2018-03-30T22:26:54+00:00

Some PCIe features (AER, DPC, hotplug, PME) can be managed by either the platform firmware or the OS, so the host bridge driver may have to request permission from the platform before using them. On ACPI systems, this is done by negotiate_os_control() in acpi_pci_root_add(). The PCIe port driver later uses pcie_port_platform_notify() and pcie_port_acpi_setup() to figure out whether it can use these features. But all we need is a single bit for each service, so these interfaces are needlessly complicated. Simplify this by adding bits in the struct pci_host_bridge to show when the OS has permission to use each feature: + unsigned int native_aer:1; /* OS may use PCIe AER */ + unsigned int native_hotplug:1; /* OS may use PCIe hotplug */ + unsigned int native_pme:1; /* OS may use PCIe PME */ These are set when we create a host bridge, and the host bridge driver can clear the bits corresponding to any feature the platform doesn't want us to use. Signed-off-by: Bjorn Helgaas Reviewed-by: Rafael J. Wysocki

treewide: Consolidate Apple DMI checks

2017-08-03T21:26:22+00:00

We're about to amend ACPI bus scan with DMI checks whether we're running on a Mac to support Apple device properties in AML. The DMI checks are performed for every single device, adding overhead for everything x86 that isn't Apple, which is the majority. Rafael and Andy therefore request to perform the DMI match only once and cache the result. Outside of ACPI various other Apple DMI checks exist and it seems reasonable to use the cached value there as well. Rafael, Andy and Darren suggest performing the DMI check in arch code and making it available with a header in include/linux/platform_data/x86/. To this end, add early_platform_quirks() to arch/x86/kernel/quirks.c to perform the DMI check and invoke it from setup_arch(). Switch over all existing Apple DMI checks, thereby fixing two deficiencies: * They are now #defined to false on non-x86 arches and can thus be optimized away if they're located in cross-arch code. * Some of them only match "Apple Inc." but not "Apple Computer, Inc.", which is used by BIOSes released between January 2006 (when the first x86 Macs started shipping) and January 2007 (when the company name changed upon introduction of the iPhone). Suggested-by: Andy Shevchenko Suggested-by: Rafael J. Wysocki Suggested-by: Darren Hart Signed-off-by: Lukas Wunner Acked-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki

Merge tag 'pm-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2017-07-04T20:39:41+00:00

Pull power management updates from Rafael Wysocki: "The big ticket items here are the rework of suspend-to-idle in order to add proper support for power button wakeup from it on recent Dell laptops and the rework of interfaces exporting the current CPU frequency on x86. In addition to that, support for a few new pieces of hardware is added, the PCI/ACPI device wakeup infrastructure is simplified significantly and the wakeup IRQ framework is fixed to unbreak the IRQ bus locking infrastructure. Also, there are some functional improvements for intel_pstate, tools updates and small fixes and cleanups all over. Specifics: - Rework suspend-to-idle to allow it to take wakeup events signaled by the EC into account on ACPI-based platforms in order to properly support power button wakeup from suspend-to-idle on recent Dell laptops (Rafael Wysocki). That includes the core suspend-to-idle code rework, support for the Low Power S0 _DSM interface, and support for the ACPI INT0002 Virtual GPIO device from Hans de Goede (required for USB keyboard wakeup from suspend-to-idle to work on some machines). - Stop trying to export the current CPU frequency via /proc/cpuinfo on x86 as that is inaccurate and confusing (Len Brown). - Rework the way in which the current CPU frequency is exported by the kernel (over the cpufreq sysfs interface) on x86 systems with the APERF and MPERF registers by always using values read from these registers, when available, to compute the current frequency regardless of which cpufreq driver is in use (Len Brown). - Rework the PCI/ACPI device wakeup infrastructure to remove the questionable and artificial distinction between "devices that can wake up the system from sleep states" and "devices that can generate wakeup signals in the working state" from it, which allows the code to be simplified quite a bit (Rafael Wysocki). - Fix the wakeup IRQ framework by making it use SRCU instead of RCU which doesn't allow sleeping in the read-side critical sections, but which in turn is expected to be allowed by the IRQ bus locking infrastructure (Thomas Gleixner). - Modify some computations in the intel_pstate driver to avoid rounding errors resulting from them (Srinivas Pandruvada). - Reduce the overhead of the intel_pstate driver in the HWP (hardware-managed P-states) mode and when the "performance" P-state selection algorithm is in use by making it avoid registering scheduler callbacks in those cases (Len Brown). - Rework the energy_performance_preference sysfs knob in intel_pstate by changing the values that correspond to different symbolic hint names used by it (Len Brown). - Make it possible to use more than one cpuidle driver at the same time on ARM (Daniel Lezcano). - Make it possible to prevent the cpuidle menu governor from using the 0 state by disabling it via sysfs (Nicholas Piggin). - Add support for FFH (Fixed Functional Hardware) MWAIT in ACPI C1 on AMD systems (Yazen Ghannam). - Make the CPPC cpufreq driver take the lowest nonlinear performance information into account (Prashanth Prakash). - Add support for hi3660 to the cpufreq-dt driver, fix the imx6q driver and clean up the sfi, exynos5440 and intel_pstate drivers (Colin Ian King, Krzysztof Kozlowski, Octavian Purdila, Rafael Wysocki, Tao Wang). - Fix a few minor issues in the generic power domains (genpd) framework and clean it up somewhat (Krzysztof Kozlowski, Mikko Perttunen, Viresh Kumar). - Fix a couple of minor issues in the operating performance points (OPP) framework and clean it up somewhat (Viresh Kumar). - Fix a CONFIG dependency in the hibernation core and clean it up slightly (Balbir Singh, Arvind Yadav, BaoJun Luo). - Add rk3228 support to the rockchip-io adaptive voltage scaling (AVS) driver (David Wu). - Fix an incorrect bit shift operation in the RAPL power capping driver (Adam Lessnau). - Add support for the EPP field in the HWP (hardware managed P-states) control register, HWP.EPP, to the x86_energy_perf_policy tool and update msr-index.h with HWP.EPP values (Len Brown). - Fix some minor issues in the turbostat tool (Len Brown). - Add support for AMD family 0x17 CPUs to the cpupower tool and fix a minor issue in it (Sherry Hurwitz). - Assorted cleanups, mostly related to the constification of some data structures (Arvind Yadav, Joe Perches, Kees Cook, Krzysztof Kozlowski)" * tag 'pm-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (69 commits) cpufreq: Update scaling_cur_freq documentation cpufreq: intel_pstate: Clean up after performance governor changes PM: hibernate: constify attribute_group structures. cpuidle: menu: allow state 0 to be disabled intel_idle: Use more common logging style PM / Domains: Fix missing default_power_down_ok comment PM / Domains: Fix unsafe iteration over modified list of domains PM / Domains: Fix unsafe iteration over modified list of domain providers PM / Domains: Fix unsafe iteration over modified list of device links PM / Domains: Handle safely genpd_syscore_switch() call on non-genpd device PM / Domains: Call driver's noirq callbacks PM / core: Drop run_wake flag from struct dev_pm_info PCI / PM: Simplify device wakeup settings code PCI / PM: Drop pme_interrupt flag from struct pci_dev ACPI / PM: Consolidate device wakeup settings code ACPI / PM: Drop run_wake from struct acpi_device_wakeup_flags PM / QoS: constify *_attribute_group. PM / AVS: rockchip-io: add io selectors and supplies for rk3228 powercap/RAPL: prevent overridding bits outside of the mask PM / sysfs: Constify attribute groups ...