BMC/Intel-BMC/linux.git/drivers/acpi/device_pm.c, branch dev-4.3

Merge branch 'acpi-pm'

2015-09-01T01:38:43+00:00

* acpi-pm: ACPI / bus: Move duplicate code to a separate new function mfd: Add support for Intel Sunrisepoint LPSS devices dmaengine: add a driver for Intel integrated DMA 64-bit mfd: make mfd_remove_devices() iterate in reverse order driver core: implement device_for_each_child_reverse() klist: implement klist_prev() Driver core: wakeup the parent device before trying probe ACPI / PM: Attach ACPI power domain only once PM / QoS: Make it possible to expose device latency tolerance to userspace ACPI / PM: Update the copyright notice and description of power.c

Merge branches 'acpi-scan', 'acpi-processor' and 'acpi-assorted'

2015-09-01T01:38:22+00:00

* acpi-scan: ACPI / bus: Move ACPI bus type registration ACPI / scan: Move bus operations and notification routines to bus.c ACPI / scan: Move device matching code to bus.c ACPI / scan: Move sysfs-related device code to a separate file * acpi-processor: PCC: Disable compilation by default ACPI: Decouple ACPI idle and ACPI processor drivers ACPI: Split out ACPI PSS from ACPI Processor driver PCC: Initialize PCC Mailbox earlier at boot ACPI / processor: remove leftover __refdata annotations * acpi-assorted: ACPI: fix acpi_debugfs_init prototype ACPI: Remove FSF mailing addresses

Merge back earlier ACPI PM material for v4.3.

2015-07-31T19:40:03+00:00

ACPI / PM: Use target_state to set the device power state

2015-07-28T14:29:08+00:00

Commit 20dacb71ad28 ("ACPI / PM: Rework device power management to follow ACPI 6") changed the device power management to use D3hot if the device in question does not have _PR3 method even if D3cold was requested by the caller. However, if the device has _PR3 device->power.state is also set to D3hot instead of D3Cold after power resources have been turned off because device->power.state will be assigned from "state" instead of "target_state". Next time the device is transitioned to D0, acpi_power_transition() will find that the current power state of the device is D3hot instead of D3cold which causes it to power down all resources required for the current (wrong) state D3hot. Below is a simplified ASL example of a real touch panel device which triggers the problem: Scope (TPL1) { Name (_PR0, Package (1) { \_SB.PCI0.I2C1.PXTC }) Name (_PR3, Package (1) { \_SB.PCI0.I2C1.PXTC }) ... } In both D0 and D3hot the same power resource is required. However, when acpi_power_transition() turns off power resources required for D3hot (as the device is transitioned to D0) it powers down PXTC which then makes the device to lose its power. Fix this by assigning "target_state" to the device power state instead of "state" that is always D3hot even for devices with valid _PR3. Fixes: 20dacb71ad28 (ACPI / PM: Rework device power management to follow ACPI 6) Signed-off-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki

ACPI / PM: Attach ACPI power domain only once

2015-07-28T07:50:42+00:00

Some devices, like MFD subdevices, share a single ACPI companion device so that they are able to access their resources and children. However, currently all these subdevices are attached to the ACPI power domain and this might cause that the power methods for the companion device get called more than once. In order to solve this we attach the ACPI power domain only to the first physical device that is bound to the ACPI companion device. In case of MFD devices, this is the parent MFD device itself. Acked-by: Rafael J. Wysocki Signed-off-by: Mika Westerberg Signed-off-by: Andy Shevchenko Signed-off-by: Lee Jones

ACPI: Remove FSF mailing addresses

2015-07-08T00:27:32+00:00

There is no need to carry potentially outdated Free Software Foundation mailing address in file headers since the COPYING file includes it. Signed-off-by: Jarkko Nikula Signed-off-by: Rafael J. Wysocki

ACPI / PM: Add missing pm_generic_complete() invocation

2015-06-09T23:32:38+00:00

Add missing invocation of pm_generic_complete() to acpi_subsys_complete() to allow ->complete callbacks provided by the drivers of devices using the ACPI PM domain to be executed during system resume. Fixes: f25c0ae2b4c4 (ACPI / PM: Avoid resuming devices in ACPI PM domain during system suspend) Cc: 3.16+ # 3.16+ Signed-off-by: Rafael J. Wysocki

ACPI / PM: Rework device power management to follow ACPI 6

2015-05-15T23:55:35+00:00

The ACPI 6 specification has made some changes in the device power management area. In particular: * The D3hot power state is now supposed to be always available (instead of D3cold) and D3cold is only regarded as valid if the _PR3 object is present for the given device. * The required ordering of transitions into power states deeper than D0 is now such that for a transition into state Dx the _PSx method is supposed to be executed first, if present, and the states of the power resources the device depends on are supposed to be changed after that. * It is now explicitly forbidden to transition devices from lower-power (deeper) into higher-power (shallower) power states other than D0. Those changes have been made so the specification reflects the Windows' device power management code that the vast majority of systems using ACPI is validated against. To avoid artificial differences in ACPI device power management between Windows and Linux, modify the ACPI device power management code to follow the new specification. Add comments explaining the code flow in some unclear places. This only may affect some real corner cases in which the OS behavior expected by the firmware is different from the Windows one, but that's quite unlikely. The transition ordering change affects transitions to D1 and D2 which are rarely used (if at all) and into D3hot and D3cold for devices actually having _PR3, but those are likely to be validated against Windows anyway. The other changes may affect code calling acpi_device_get_power() or acpi_device_update_power() where ACPI_STATE_D3_HOT may be returned instead of ACPI_STATE_D3_COLD (that's why the ACPI fan driver needs to be updated too) and since transitions into ACPI_STATE_D3_HOT may remove power now, it is better to avoid this one in acpi_pm_device_sleep_state() if the "no power off" PM QoS flag is set. The only existing user of acpi_device_can_poweroff() really cares about the case when _PR3 is present, so the change in that function should not cause any problems to happen too. A plus is that PCI_D3hot can be mapped to ACPI_STATE_D3_HOT now and the compatibility with older systems should be covered automatically. In any case, if any real problems result from this, it still will be better to follow the Windows' behavior (which now is reflected by the specification too) in general and handle the cases when it doesn't work via quirks. Signed-off-by: Rafael J. Wysocki

ACPI / PM: Remove unneeded nested #ifdef

2015-02-08T22:45:58+00:00

In commit 5de21bb998b8 ("ACPI / PM: Drop CONFIG_PM_RUNTIME from the ACPI core"), all occurrences of CONFIG_PM_RUNTIME were replaced with CONFIG_PM. This created the following structure of #ifdef blocks in the code: [...] #ifdef CONFIG_PM #ifdef CONFIG_PM /* always on / undead */ #ifdef CONFIG_PM_SLEEP [...] #endif #endif [...] #endif This patch removes the inner "#ifdef CONFIG_PM" block as it will always be enabled when the outer block is enabled. This inconsistency was found using the undertaker-checkpatch tool. Signed-off-by: Andreas Ruprecht Signed-off-by: Rafael J. Wysocki

ACPI / PM: Fix PM initialization for devices that are not present

2015-01-05T21:49:52+00:00

If an ACPI device object whose _STA returns 0 (not present and not functional) has _PR0 or _PS0, its power_manageable flag will be set and acpi_bus_init_power() will return 0 for it. Consequently, if such a device object is passed to the ACPI device PM functions, they will attempt to carry out the requested operation on the device, although they should not do that for devices that are not present. To fix that problem make acpi_bus_init_power() return an error code for devices that are not present which will cause power_manageable to be cleared for them as appropriate in acpi_bus_get_power_flags(). However, the lists of power resources should not be freed for the device in that case, so modify acpi_bus_get_power_flags() to keep those lists even if acpi_bus_init_power() returns an error. Accordingly, when deciding whether or not the lists of power resources need to be freed, acpi_free_power_resources_lists() should check the power.flags.power_resources flag instead of flags.power_manageable, so make that change too. Furthermore, if acpi_bus_attach() sees that flags.initialized is unset for the given device, it should reset the power management settings of the device and re-initialize them from scratch instead of relying on the previous settings (the device may have appeared after being not present previously, for example), so make it use the 'valid' flag of the D0 power state as the initial value of flags.power_manageable for it and call acpi_bus_init_power() to discover its current power state. Signed-off-by: Rafael J. Wysocki Reviewed-by: Mika Westerberg Cc: 3.10+ # 3.10+