BMC/Intel-BMC/linux.git/drivers/Kconfig, branch dev-5.15-intel

drivers: jtag: Add JTAG core driver

2021-11-05T07:22:07+00:00

JTAG class driver provide infrastructure to support hardware/software JTAG platform drivers. It provide user layer API interface for flashing and debugging external devices which equipped with JTAG interface using standard transactions. Driver exposes set of IOCTL to user space for: - XFER: SIR (Scan Instruction Register, IEEE 1149.1 Data Register scan); SDR (Scan Data Register, IEEE 1149.1 Instruction Register scan); - GIOCSTATUS read the current TAPC state of the JTAG controller - SIOCSTATE Forces the JTAG TAPC to go into a particular state. - SIOCFREQ/GIOCFREQ for setting and reading JTAG frequency. - IOCBITBANG for low level control of JTAG signals. Driver core provides set of internal APIs for allocation and registration: - jtag_register; - jtag_unregister; - jtag_alloc; - jtag_free; Platform driver on registration with jtag-core creates the next entry in dev folder: /dev/jtagX Signed-off-by: Oleksandr Shamray Signed-off-by: Jiri Pirko Signed-off-by: Ernesto Corona Acked-by: Philippe Ombredanne Cc: Greg Kroah-Hartman Cc: Arnd Bergmann Cc: Boris Brezillon Cc: Randy Dunlap Cc: Johan Hovold Cc: Jens Axboe Cc: Joel Stanley Cc: Palmer Dabbelt Cc: Kees Cook Cc: William Breathitt Gray Cc: Federico Vaga Cc: Jonathan Cameron Cc: Tony Luck Cc: Christian Gromm Cc: Linus Walleij Cc: Yiwei Zhang Cc: Alessandro Rubini Cc: Viresh Kumar Cc: Mika Westerberg Cc: Steven Filary Cc: Vadim Pasternak Cc: Amithash Prasad Cc: Patrick Williams Cc: Rgrs

peci: Add support for PECI bus driver core

2021-11-05T07:22:04+00:00

This commit adds driver implementation for PECI bus core into linux driver framework. PECI (Platform Environment Control Interface) is a one-wire bus interface that provides a communication channel from Intel processors and chipset components to external monitoring or control devices. PECI is designed to support the following sideband functions: * Processor and DRAM thermal management - Processor fan speed control is managed by comparing Digital Thermal Sensor (DTS) thermal readings acquired via PECI against the processor-specific fan speed control reference point, or TCONTROL. Both TCONTROL and DTS thermal readings are accessible via the processor PECI client. These variables are referenced to a common temperature, the TCC activation point, and are both defined as negative offsets from that reference. - PECI based access to the processor package configuration space provides a means for Baseboard Management Controllers (BMC) or other platform management devices to actively manage the processor and memory power and thermal features. * Platform Manageability - Platform manageability functions including thermal, power, and error monitoring. Note that platform 'power' management includes monitoring and control for both the processor and DRAM subsystem to assist with data center power limiting. - PECI allows read access to certain error registers in the processor MSR space and status monitoring registers in the PCI configuration space within the processor and downstream devices. - PECI permits writes to certain registers in the processor PCI configuration space. * Processor Interface Tuning and Diagnostics - Processor interface tuning and diagnostics capabilities (Intel Interconnect BIST). The processors Intel Interconnect Built In Self Test (Intel IBIST) allows for infield diagnostic capabilities in the Intel UPI and memory controller interfaces. PECI provides a port to execute these diagnostics via its PCI Configuration read and write capabilities. * Failure Analysis - Output the state of the processor after a failure for analysis via Crashdump. PECI uses a single wire for self-clocking and data transfer. The bus requires no additional control lines. The physical layer is a self-clocked one-wire bus that begins each bit with a driven, rising edge from an idle level near zero volts. The duration of the signal driven high depends on whether the bit value is a logic '0' or logic '1'. PECI also includes variable data transfer rate established with every message. In this way, it is highly flexible even though underlying logic is simple. The interface design was optimized for interfacing between an Intel processor and chipset components in both single processor and multiple processor environments. The single wire interface provides low board routing overhead for the multiple load connections in the congested routing area near the processor and chipset components. Bus speed, error checking, and low protocol overhead provides adequate link bandwidth and reliability to transfer critical device operating conditions and configuration information. This implementation provides the basic framework to add PECI extensions to the Linux bus and device models. A hardware specific 'Adapter' driver can be attached to the PECI bus to provide sideband functions described above. It is also possible to access all devices on an adapter from userspace through the /dev interface. A device specific 'Client' driver also can be attached to the PECI bus so each processor client's features can be supported by the 'Client' driver through an adapter connection in the bus. Signed-off-by: Jason M Biils Signed-off-by: Yunge Zhu Signed-off-by: Fengguang Wu Signed-off-by: Jae Hyun Yoo Reviewed-by: Haiyue Wang Reviewed-by: James Feist Reviewed-by: Vernon Mauery

firmware: include drivers/firmware/Kconfig unconditionally

2021-10-07T14:51:26+00:00

Compile-testing drivers that require access to a firmware layer fails when that firmware symbol is unavailable. This happened twice this week: - My proposed to change to rework the QCOM_SCM firmware symbol broke on ppc64 and others. - The cs_dsp firmware patch added device specific firmware loader into drivers/firmware, which broke on the same set of architectures. We should probably do the same thing for other subsystems as well, but fix this one first as this is a dependency for other patches getting merged. Reviewed-by: Bjorn Andersson Reviewed-by: Charles Keepax Acked-by: Will Deacon Acked-by: Bjorn Andersson Cc: Mark Brown Cc: Liam Girdwood Cc: Charles Keepax Cc: Simon Trimmer Cc: Michael Ellerman Reviewed-by: Mark Brown Signed-off-by: Arnd Bergmann

remove the lightnvm subsystem

2021-08-14T21:54:09+00:00

Lightnvm supports the OCSSD 1.x and 2.0 specs which were early attempts to produce Open Channel SSDs and never made it into the NVMe spec proper. They have since been superceeded by NVMe enhancements such as ZNS support. Remove the support per the deprecation schedule. Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20210812132308.38486-1-hch@lst.de Reviewed-by: Matias Bjørling Reviewed-by: Javier González Signed-off-by: Jens Axboe

ide: remove the legacy ide driver

2021-06-16T14:53:58+00:00

The legay ide driver has been replace with libata starting in 2003 and has been scheduled for removal for a while. Finally kill it off so that we can start cleaning up various bits of cruft it forced on the block layer. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe

staging: comedi: move out of staging directory

2021-04-15T07:26:25+00:00

The comedi code came into the kernel back in 2008, but traces its lifetime to much much earlier. It's been polished and buffed and there's really nothing preventing it from being part of the "real" portion of the kernel. So move it to drivers/comedi/ as it belongs there. Many thanks to the hundreds of developers who did the work to make this happen. Cc: Ian Abbott Cc: H Hartley Sweeten Link: https://lore.kernel.org/r/YHauop4u3sP6lz8j@kroah.com Signed-off-by: Greg Kroah-Hartman

cxl/mem: Introduce a driver for CXL-2.0-Type-3 endpoints

2021-02-17T04:36:38+00:00

The CXL.mem protocol allows a device to act as a provider of "System RAM" and/or "Persistent Memory" that is fully coherent as if the memory was attached to the typical CPU memory controller. With the CXL-2.0 specification a PCI endpoint can implement a "Type-3" device interface and give the operating system control over "Host Managed Device Memory". See section 2.3 Type 3 CXL Device. The memory range exported by the device may optionally be described by the platform firmware memory map, or by infrastructure like LIBNVDIMM to provision persistent memory capacity from one, or more, CXL.mem devices. A pre-requisite for Linux-managed memory-capacity provisioning is this cxl_mem driver that can speak the mailbox protocol defined in section 8.2.8.4 Mailbox Registers. For now just land the initial driver boiler-plate and Documentation/ infrastructure. Signed-off-by: Ben Widawsky Reviewed-by: Jonathan Cameron Acked-by: David Rientjes (v1) Cc: Jonathan Corbet Link: https://www.computeexpresslink.org/download-the-specification Link: https://lore.kernel.org/r/20210217040958.1354670-2-ben.widawsky@intel.com Signed-off-by: Dan Williams

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

2020-04-08T17:51:53+00:00

Pull virtio updates from Michael Tsirkin: - Some bug fixes - The new vdpa subsystem with two first drivers * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-balloon: Revert "virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM" vdpa: move to drivers/vdpa virtio: Intel IFC VF driver for VDPA vdpasim: vDPA device simulator vhost: introduce vDPA-based backend virtio: introduce a vDPA based transport vDPA: introduce vDPA bus vringh: IOTLB support vhost: factor out IOTLB vhost: allow per device message handler vhost: refine vhost and vringh kconfig virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM virtio-net: Introduce hash report feature virtio-net: Introduce RSS receive steering feature virtio-net: Introduce extended RSC feature tools/virtio: option to build an out of tree module

Merge tag 'trace-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2020-04-05T17:36:18+00:00

Pull tracing updates from Steven Rostedt: "New tracing features: - The ring buffer is no longer disabled when reading the trace file. The trace_pipe file was made to be used for live tracing and reading as it acted like the normal producer/consumer. As the trace file would not consume the data, the easy way of handling it was to just disable writes to the ring buffer. This came to a surprise to the BPF folks who complained about lost events due to reading. This is no longer an issue. If someone wants to keep the old disabling there's a new option "pause-on-trace" that can be set. - New set_ftrace_notrace_pid file. PIDs in this file will not be traced by the function tracer. Similar to set_ftrace_pid, which makes the function tracer only trace those tasks with PIDs in the file, the set_ftrace_notrace_pid does the reverse. - New set_event_notrace_pid file. PIDs in this file will cause events not to be traced if triggered by a task with a matching PID. Similar to the set_event_pid file but will not be traced. Note, sched_waking and sched_switch events may still be traced if one of the tasks referenced by those events contains a PID that is allowed to be traced. Tracing related features: - New bootconfig option, that is attached to the initrd file. If bootconfig is on the command line, then the initrd file is searched looking for a bootconfig appended at the end. - New GPU tracepoint infrastructure to help the gfx drivers to get off debugfs (acked by Greg Kroah-Hartman) And other minor updates and fixes" * tag 'trace-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (27 commits) tracing: Do not allocate buffer in trace_find_next_entry() in atomic tracing: Add documentation on set_ftrace_notrace_pid and set_event_notrace_pid selftests/ftrace: Add test to test new set_event_notrace_pid file selftests/ftrace: Add test to test new set_ftrace_notrace_pid file tracing: Create set_event_notrace_pid to not trace tasks ftrace: Create set_ftrace_notrace_pid to not trace tasks ftrace: Make function trace pid filtering a bit more exact ftrace/kprobe: Show the maxactive number on kprobe_events tracing: Have the document reflect that the trace file keeps tracing enabled ring-buffer/tracing: Have iterator acknowledge dropped events tracing: Do not disable tracing when reading the trace file ring-buffer: Do not disable recording when there is an iterator ring-buffer: Make resize disable per cpu buffer instead of total buffer ring-buffer: Optimize rb_iter_head_event() ring-buffer: Do not die if rb_iter_peek() fails more than thrice ring-buffer: Have rb_iter_head_event() handle concurrent writer ring-buffer: Add page_stamp to iterator for synchronization ring-buffer: Rename ring_buffer_read() to read_buffer_iter_advance() ring-buffer: Have ring_buffer_empty() not depend on tracing stopped tracing: Save off entry when peeking at next entry ...

vdpa: move to drivers/vdpa

2020-04-02T14:41:40+00:00

We have both vhost and virtio drivers that depend on vdpa. It's easier to locate it at a top level directory otherwise we run into issues e.g. if vhost is built-in but virtio is modular. Let's just move it up a level. Reported-by: Randy Dunlap Signed-off-by: Michael S. Tsirkin