BMC/Intel-BMC/linux.git/block/blk-mq-sysfs.c, branch dev

blk-mq: add blk_mq_init_allocated_queue and export blk_mq_register_disk

2015-03-13T14:26:53+00:00

Add a variant of blk_mq_init_queue that allows a previously allocated queue to be initialized. blk_mq_init_allocated_queue models blk_init_allocated_queue -- which was also created for DM's use. DM's approach to device creation requires a placeholder request_queue be allocated for use with alloc_dev() but the decision about what type of request_queue will be ultimately created is deferred until all component devices referenced in the DM table are processed to determine the table type (request-based, blk-mq request-based, or bio-based). Also, because of DM's late finalization of the request_queue type the call to blk_mq_register_disk() doesn't happen during alloc_dev(). Must export blk_mq_register_disk() so that DM can backfill the 'mq' dir once the blk-mq queue is fully allocated. Signed-off-by: Mike Snitzer Reviewed-by: Ming Lei Signed-off-by: Jens Axboe

Revert "blk-mq: fix hctx/ctx kobject use-after-free"

2015-01-29T16:30:49+00:00

This reverts commit 76d697d10769048e5721510100bf3a9413a56385. The commit 76d697d10769048 causes general protection fault reported from Bart Van Assche: https://lkml.org/lkml/2015/1/28/334 Reported-by: Bart Van Assche Signed-off-by: Ming Lei Signed-off-by: Jens Axboe

blk-mq: fix hctx/ctx kobject use-after-free

2015-01-20T16:28:33+00:00

The kobject memory shouldn't have been freed before the kobject is released because driver core can access it freely before its release. This patch frees hctx in its release callback. For ctx, they share one single per-cpu variable which is associated with the request queue, so free ctx in q->mq_kobj's release handler. Signed-off-by: Sasha Levin (fix ctx kobjects) Signed-off-by: Ming Lei Signed-off-by: Jens Axboe

blk-mq: Fix uninitialized kobject at CPU hotplugging

2014-12-10T15:57:31+00:00

When a CPU is hotplugged, the current blk-mq spews a warning like: kobject '(null)' (ffffe8ffffc8b5d8): tried to add an uninitialized object, something is seriously wrong. CPU: 1 PID: 1386 Comm: systemd-udevd Not tainted 3.18.0-rc7-2.g088d59b-default #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_171129-lamiak 04/01/2014 0000000000000000 0000000000000002 ffffffff81605f07 ffffe8ffffc8b5d8 ffffffff8132c7a0 ffff88023341d370 0000000000000020 ffff8800bb05bd58 ffff8800bb05bd08 000000000000a0a0 000000003f441940 0000000000000007 Call Trace: [] dump_trace+0x86/0x330 [] show_stack_log_lvl+0x94/0x170 [] show_stack+0x21/0x50 [] dump_stack+0x41/0x51 [] kobject_add+0xa0/0xb0 [] blk_mq_register_hctx+0x91/0xb0 [] blk_mq_sysfs_register+0x3e/0x60 [] blk_mq_queue_reinit_notify+0xf8/0x190 [] notifier_call_chain+0x4c/0x70 [] cpu_notify+0x23/0x50 [] _cpu_up+0x157/0x170 [] cpu_up+0x89/0xb0 [] cpu_subsys_online+0x35/0x80 [] device_online+0x5d/0xa0 [] online_store+0x75/0x80 [] kernfs_fop_write+0xda/0x150 [] vfs_write+0xb2/0x1f0 [] SyS_write+0x42/0xb0 [] system_call_fastpath+0x16/0x1b [<00007f0132fb24e0>] 0x7f0132fb24e0 This is indeed because of an uninitialized kobject for blk_mq_ctx. The blk_mq_ctx kobjects are initialized in blk_mq_sysfs_init(), but it goes loop over hctx_for_each_ctx(), i.e. it initializes only for online CPUs. Thus, when a CPU is hotplugged, the ctx for the newly onlined CPU is registered without initialization. This patch fixes the issue by initializing the all ctx kobjects belonging to each queue. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=908794 Cc: Signed-off-by: Takashi Iwai Signed-off-by: Jens Axboe

blk-mq, percpu_ref: start q->mq_usage_counter in atomic mode

2014-09-24T17:37:21+00:00

blk-mq uses percpu_ref for its usage counter which tracks the number of in-flight commands and used to synchronously drain the queue on freeze. percpu_ref shutdown takes measureable wallclock time as it involves a sched RCU grace period. This means that draining a blk-mq takes measureable wallclock time. One would think that this shouldn't matter as queue shutdown should be a rare event which takes place asynchronously w.r.t. userland. Unfortunately, SCSI probing involves synchronously setting up and then tearing down a lot of request_queues back-to-back for non-existent LUNs. This means that SCSI probing may take above ten seconds when scsi-mq is used. [ 0.949892] scsi host0: Virtio SCSI HBA [ 1.007864] scsi 0:0:0:0: Direct-Access QEMU QEMU HARDDISK 1.1. PQ: 0 ANSI: 5 [ 1.021299] scsi 0:0:1:0: Direct-Access QEMU QEMU HARDDISK 1.1. PQ: 0 ANSI: 5 [ 1.520356] tsc: Refined TSC clocksource calibration: 2491.910 MHz [ 16.186549] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 16.190478] sd 0:0:1:0: Attached scsi generic sg1 type 0 [ 16.194099] osd: LOADED open-osd 0.2.1 [ 16.203202] sd 0:0:0:0: [sda] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB) [ 16.208478] sd 0:0:0:0: [sda] Write Protect is off [ 16.211439] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 16.218771] sd 0:0:1:0: [sdb] 31457280 512-byte logical blocks: (16.1 GB/15.0 GiB) [ 16.223264] sd 0:0:1:0: [sdb] Write Protect is off [ 16.225682] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA This is also the reason why request_queues start in bypass mode which is ended on blk_register_queue() as shutting down a fully functional queue also involves a RCU grace period and the queues for non-existent SCSI devices never reach registration. blk-mq basically needs to do the same thing - start the mq in a degraded mode which is faster to shut down and then make it fully functional only after the queue reaches registration. percpu_ref recently grew facilities to force atomic operation until explicitly switched to percpu mode, which can be used for this purpose. This patch makes blk-mq initialize q->mq_usage_counter in atomic mode and switch it to percpu mode only once blk_register_queue() is reached. Note that this issue was previously worked around by 0a30288da1ae ("blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe") for v3.17. The temp fix was reverted in preparation of adding persistent atomic mode to percpu_ref by 9eca80461a45 ("Revert "blk-mq, percpu_ref: implement a kludge for SCSI blk-mq stall during probe""). This patch and the prerequisite percpu_ref changes will be merged during v3.18 devel cycle. Signed-off-by: Tejun Heo Reported-by: Christoph Hellwig Link: http://lkml.kernel.org/g/20140919113815.GA10791@lst.de Fixes: add703fda981 ("blk-mq: use percpu_ref for mq usage count") Reviewed-by: Kent Overstreet Cc: Jens Axboe Cc: Johannes Weiner

blk-mq: blk_mq_unregister_hctx() can be static

2014-05-30T16:31:13+00:00

CC: Jens Axboe Signed-off-by: Fengguang Wu Signed-off-by: Jens Axboe

blk-mq: make the sysfs mq/ layout reflect current mappings

2014-05-30T14:25:36+00:00

Currently blk-mq registers all the hardware queues in sysfs, regardless of whether it uses them (e.g. they have CPU mappings) or not. The unused hardware queues lack the cpux/ directories, and the other sysfs entries (like active, pending, etc) are all zeroes. Change this so that sysfs correctly reflects the current mappings of the hardware queues. Signed-off-by: Jens Axboe

blk-mq: improve support for shared tags maps

2014-05-13T21:10:52+00:00

This adds support for active queue tracking, meaning that the blk-mq tagging maintains a count of active users of a tag set. This allows us to maintain a notion of fairness between users, so that we can distribute the tag depth evenly without starving some users while allowing others to try unfair deep queues. If sharing of a tag set is detected, each hardware queue will track the depth of its own queue. And if this exceeds the total depth divided by the number of active queues, the user is actively throttled down. The active queue count is done lazily to avoid bouncing that data between submitter and completer. Each hardware queue gets marked active when it allocates its first tag, and gets marked inactive when 1) the last tag is cleared, and 2) the queue timeout grace period has passed. Signed-off-by: Jens Axboe

blk-mq: respect rq_affinity

2014-04-25T14:24:07+00:00

The blk-mq code is using it's own version of the I/O completion affinity tunables, which causes a few issues: - the rq_affinity sysfs file doesn't work for blk-mq devices, even if it still is present, thus breaking existing tuning setups. - the rq_affinity = 1 mode, which is the defauly for legacy request based drivers isn't implemented at all. - blk-mq drivers don't implement any completion affinity with the default flag settings. This patches removes the blk-mq ipi_redirect flag and sysfs file, as well as the internal BLK_MQ_F_SHOULD_IPI flag and replaces it with code that respects the queue-wide rq_affinity flags and also implements the rq_affinity = 1 mode. This means I/O completion affinity can now only be tuned block-queue wide instead of per context, which seems more sensible to me anyway. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe

blk-mq: simplify blk_mq_hw_sysfs_cpus_show()

2014-04-09T16:53:21+00:00

Now that we have a cpu mask of CPUs that are mapped to a specific hardware queue, we can just iterate that to display the sysfs num-hw-queue/cpu_list file. Signed-off-by: Jens Axboe