BMC/Intel-BMC/linux.git/block/blk-mq-debugfs.c, branch dev-5.8-intel

blk-mq-debugfs: update blk_queue_flag_name[] accordingly for new flags

2020-06-29T13:45:09+00:00

Else there may be magic numbers in /sys/kernel/debug/block/*/state. Signed-off-by: Hou Tao Reviewed-by: Bart Van Assche Signed-off-by: Jens Axboe

blk-mq: drain I/O when all CPUs in a hctx are offline

2020-05-29T16:23:25+00:00

Most of blk-mq drivers depend on managed IRQ's auto-affinity to setup up queue mapping. Thomas mentioned the following point[1]: "That was the constraint of managed interrupts from the very beginning: The driver/subsystem has to quiesce the interrupt line and the associated queue _before_ it gets shutdown in CPU unplug and not fiddle with it until it's restarted by the core when the CPU is plugged in again." However, current blk-mq implementation doesn't quiesce hw queue before the last CPU in the hctx is shutdown. Even worse, CPUHP_BLK_MQ_DEAD is a cpuhp state handled after the CPU is down, so there isn't any chance to quiesce the hctx before shutting down the CPU. Add new CPUHP_AP_BLK_MQ_ONLINE state to stop allocating from blk-mq hctxs where the last CPU goes away, and wait for completion of in-flight requests. This guarantees that there is no inflight I/O before shutting down the managed IRQ. Add a BLK_MQ_F_STACKING and set it for dm-rq and loop, so we don't need to wait for completion of in-flight requests from these drivers to avoid a potential dead-lock. It is safe to do this for stacking drivers as those do not use interrupts at all and their I/O completions are triggered by underlying devices I/O completion. [1] https://lore.kernel.org/linux-block/alpine.DEB.2.21.1904051331270.1802@nanos.tec.linutronix.de/ [hch: different retry mechanism, merged two patches, minor cleanups] Signed-off-by: Ming Lei Signed-off-by: Christoph Hellwig Reviewed-by: Hannes Reinecke Reviewed-by: Daniel Wagner Signed-off-by: Jens Axboe

block: remove RQF_COPY_USER

2020-04-22T16:47:06+00:00

The RQF_COPY_USER is set for bio where the passthrough request mapping helpers decided that bounce buffering is required. It is then used to pad scatterlist for drivers that required it. But given that non-passthrough requests are per definition aligned, and directly mapped pass-through request must be aligned it is not actually required at all. Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe

Merge tag 'for-5.3/block-20190708' of git://git.kernel.dk/linux-block

2019-07-09T17:45:06+00:00

Pull block updates from Jens Axboe: "This is the main block updates for 5.3. Nothing earth shattering or major in here, just fixes, additions, and improvements all over the map. This contains: - Series of documentation fixes (Bart) - Optimization of the blk-mq ctx get/put (Bart) - null_blk removal race condition fix (Bob) - req/bio_op() cleanups (Chaitanya) - Series cleaning up the segment accounting, and request/bio mapping (Christoph) - Series cleaning up the page getting/putting for bios (Christoph) - block cgroup cleanups and moving it to where it is used (Christoph) - block cgroup fixes (Tejun) - Series of fixes and improvements to bcache, most notably a write deadlock fix (Coly) - blk-iolatency STS_AGAIN and accounting fixes (Dennis) - Series of improvements and fixes to BFQ (Douglas, Paolo) - debugfs_create() return value check removal for drbd (Greg) - Use struct_size(), where appropriate (Gustavo) - Two lighnvm fixes (Heiner, Geert) - MD fixes, including a read balance and corruption fix (Guoqing, Marcos, Xiao, Yufen) - block opal shadow mbr additions (Jonas, Revanth) - sbitmap compare-and-exhange improvemnts (Pavel) - Fix for potential bio->bi_size overflow (Ming) - NVMe pull requests: - improved PCIe suspent support (Keith Busch) - error injection support for the admin queue (Akinobu Mita) - Fibre Channel discovery improvements (James Smart) - tracing improvements including nvmetc tracing support (Minwoo Im) - misc fixes and cleanups (Anton Eidelman, Minwoo Im, Chaitanya Kulkarni)" - Various little fixes and improvements to drivers and core" * tag 'for-5.3/block-20190708' of git://git.kernel.dk/linux-block: (153 commits) blk-iolatency: fix STS_AGAIN handling block: nr_phys_segments needs to be zero for REQ_OP_WRITE_ZEROES blk-mq: simplify blk_mq_make_request() blk-mq: remove blk_mq_put_ctx() sbitmap: Replace cmpxchg with xchg block: fix .bi_size overflow block: sed-opal: check size of shadow mbr block: sed-opal: ioctl for writing to shadow mbr block: sed-opal: add ioctl for done-mark of shadow mbr block: never take page references for ITER_BVEC direct-io: use bio_release_pages in dio_bio_complete block_dev: use bio_release_pages in bio_unmap_user block_dev: use bio_release_pages in blkdev_bio_end_io iomap: use bio_release_pages in iomap_dio_bio_end_io block: use bio_release_pages in bio_map_user_iov block: use bio_release_pages in bio_unmap_user block: optionally mark pages dirty in bio_release_pages block: move the BIO_NO_PAGE_REF check into bio_release_pages block: skd_main.c: Remove call to memset after dma_alloc_coherent block: mtip32xx: Remove call to memset after dma_alloc_coherent ...

blk-mq: fix up placement of debugfs directory of queue files

2019-07-06T16:07:38+00:00

When the blk-mq debugfs file creation logic was "cleaned up" it was cleaned up too much, causing the queue file to not be created in the correct location. Turns out the check for the directory being present is needed as if that has not happened yet, the files should not be created, and the function will be called later on in the initialization code so that the files can be created in the correct location. Fixes: 6cfc0081b046 ("blk-mq: no need to check return value of debugfs_create functions") Reported-by: Stephen Rothwell Cc: linux-block@vger.kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Jens Axboe

block: use blk_op_str() in blk-mq-debugfs.c

2019-06-20T19:03:51+00:00

Now that we've a helper function blk_op_str() to convert the REQ_OP_XXX to string XXX, adjust the code to use that. Get rid of the duplicate array op_name which is now present in the blk-core.c which we renamed it to "blk_op_name" and open coding in the blk-mq-debugfs.c. Reviewed-by: Bart Van Assche Signed-off-by: Chaitanya Kulkarni Signed-off-by: Jens Axboe

block: code cleanup queue_poll_stat_show()

2019-06-20T09:20:05+00:00

This is a pure code cleanup patch and doesn't change any functionality. Having multiple coding styles in the code creates confusion when someone tries to add a new code. Make queue_poll_stat_show() consistent by adding spaces around binary operators with the rest of the code. Signed-off-by: Chaitanya Kulkarni Signed-off-by: Jens Axboe

block: use right format specifier for op

2019-06-20T09:20:03+00:00

In function __blk_mq_debugfs_rq_show variable op has unsigned int type. Since op can never be negative use %u format specifier to match the variable type. Signed-off-by: Chaitanya Kulkarni Signed-off-by: Jens Axboe

block: get rid of redundant else

2019-06-20T09:20:02+00:00

This is a pure code cleanup patch and doesn't change any functionality. This removes the redundant else in the code which is not needed since we are returning from function anyway. Signed-off-by: Chaitanya Kulkarni Signed-off-by: Jens Axboe

block: use req_op() to maintain consistency

2019-06-17T15:34:18+00:00

This is a pure code cleanup patch and doesn't change any functionality. In block layer to identify the request operation req_op() macro is used, so change the open coding the req_op() in the blk-mq-debugfs.c. Reviewed-by: Martin K. Petersen Reviewed-by: Hannes Reinecke Signed-off-by: Chaitanya Kulkarni Signed-off-by: Jens Axboe