BMC/Intel-BMC/linux.git/arch, branch v5.4.29

ARM: dts: sun8i-a83t-tbs-a711: Fix USB OTG mode detection

2020-04-01T09:02:11+00:00

commit b642d4825441bf30c72b72deb739bd2d5f53af08 upstream. USB-ID signal has a pullup on the schematic, but in reality it's not pulled up, so add a GPIO pullup. And we also need a usb0_vbus_power-supply for VBUS detection. This fixes OTG mode detection and charging issues on TBS A711 tablet. The issues came from ID pin reading 0, causing host mode to be enabled, when it should not be, leading to DRVVBUS being enabled, which disabled the charger. Fixes: f2f221c7810b824e ("ARM: dts: sun8i: a711: Enable USB OTG") Signed-off-by: Ondrej Jirman Signed-off-by: Maxime Ripard Signed-off-by: Greg Kroah-Hartman

bpf, x32: Fix bug with JMP32 JSET BPF_X checking upper bits

2020-04-01T09:02:10+00:00

commit 80f1f85036355e5581ec0b99913410345ad3491b upstream. The current x32 BPF JIT is incorrect for JMP32 JSET BPF_X when the upper 32 bits of operand registers are non-zero in certain situations. The problem is in the following code: case BPF_JMP | BPF_JSET | BPF_X: case BPF_JMP32 | BPF_JSET | BPF_X: ... /* and dreg_lo,sreg_lo */ EMIT2(0x23, add_2reg(0xC0, sreg_lo, dreg_lo)); /* and dreg_hi,sreg_hi */ EMIT2(0x23, add_2reg(0xC0, sreg_hi, dreg_hi)); /* or dreg_lo,dreg_hi */ EMIT2(0x09, add_2reg(0xC0, dreg_lo, dreg_hi)); This code checks the upper bits of the operand registers regardless if the BPF instruction is BPF_JMP32 or BPF_JMP64. Registers dreg_hi and dreg_lo are not loaded from the stack for BPF_JMP32, however, they can still be polluted with values from previous instructions. The following BPF program demonstrates the bug. The jset64 instruction loads the temporary registers and performs the jump, since ((u64)r7 & (u64)r8) is non-zero. The jset32 should _not_ be taken, as the lower 32 bits are all zero, however, the current JIT will take the branch due the pollution of temporary registers from the earlier jset64. mov64 r0, 0 ld64 r7, 0x8000000000000000 ld64 r8, 0x8000000000000000 jset64 r7, r8, 1 exit jset32 r7, r8, 1 mov64 r0, 2 exit The expected return value of this program is 2; under the buggy x32 JIT it returns 0. The fix is to skip using the upper 32 bits for jset32 and compare the upper 32 bits for jset64 only. All tests in test_bpf.ko and selftests/bpf/test_verifier continue to pass with this change. We found this bug using our automated verification tool, Serval. Fixes: 69f827eb6e14 ("x32: bpf: implement jitting of JMP32") Co-developed-by: Xi Wang Signed-off-by: Xi Wang Signed-off-by: Luke Nelson Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20200305234416.31597-1-luke.r.nels@gmail.com Signed-off-by: Greg Kroah-Hartman

x86/ioremap: Fix CONFIG_EFI=n build

2020-04-01T09:01:59+00:00

commit 870b4333a62e45b0b2000d14b301b7b8b8cad9da upstream. In order to use efi_mem_type(), one needs CONFIG_EFI enabled. Otherwise that function is undefined. Use IS_ENABLED() to check and avoid the ifdeffery as the compiler optimizes away the following unreachable code then. Fixes: 985e537a4082 ("x86/ioremap: Map EFI runtime services data as encrypted for SEV") Reported-by: Randy Dunlap Signed-off-by: Borislav Petkov Tested-by: Randy Dunlap Cc: Tom Lendacky Cc: Link: https://lkml.kernel.org/r/7561e981-0d9b-d62c-0ef2-ce6007aff1ab@infradead.org Signed-off-by: Greg Kroah-Hartman

ARM: dts: omap5: Add bus_dma_limit for L3 bus

2020-04-01T09:01:59+00:00

commit dfa7ea303f56a3a8b1ed3b91ef35af2da67ca4ee upstream. The L3 interconnect's memory map is from 0x0 to 0xffffffff. Out of this, System memory (SDRAM) can be accessed from 0x80000000 to 0xffffffff (2GB) OMAP5 does support 4GB of SDRAM but upper 2GB can only be accessed by the MPU subsystem. Add the dma-ranges property to reflect the physical address limit of the L3 bus. Cc: stable@kernel.org Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman

ARM: dts: dra7: Add bus_dma_limit for L3 bus

2020-04-01T09:01:59+00:00

commit cfb5d65f25959f724081bae8445a0241db606af6 upstream. The L3 interconnect's memory map is from 0x0 to 0xffffffff. Out of this, System memory (SDRAM) can be accessed from 0x80000000 to 0xffffffff (2GB) DRA7 does support 4GB of SDRAM but upper 2GB can only be accessed by the MPU subsystem. Add the dma-ranges property to reflect the physical address limit of the L3 bus. Issues ere observed only with SATA on DRA7-EVM with 4GB RAM and CONFIG_ARM_LPAE enabled. This is because the controller supports 64-bit DMA and its driver sets the dma_mask to 64-bit thus resulting in DMA accesses beyond L3 limit of 2G. Setting the correct bus_dma_limit fixes the issue. Signed-off-by: Roger Quadros Cc: stable@kernel.org Signed-off-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman

arm64: dts: ls1043a: FMan erratum A050385

2020-04-01T09:01:52+00:00

[ Upstream commit b54d3900862374e1bb2846e6b39d79c896c0b200 ] The LS1043A SoC is affected by the A050385 erratum stating that FMAN DMA read or writes under heavy traffic load may cause FMAN internal resource leak thus stopping further packet processing. Signed-off-by: Madalin Bucur Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

arm64: smp: fix crash_smp_send_stop() behaviour

2020-03-25T07:25:59+00:00

commit f50b7dacccbab2b9e3ef18f52a6dcc18ed2050b9 upstream. On a system configured to trigger a crash_kexec() reboot, when only one CPU is online and another CPU panics while starting-up, crash_smp_send_stop() will fail to send any STOP message to the other already online core, resulting in fail to freeze and registers not properly saved. Moreover even if the proper messages are sent (case CPUs > 2) it will similarly fail to account for the booting CPU when executing the final stop wait-loop, so potentially resulting in some CPU not been waited for shutdown before rebooting. A tangible effect of this behaviour can be observed when, after a panic with kexec enabled and loaded, on the following reboot triggered by kexec, the cpu that could not be successfully stopped fails to come back online: [ 362.291022] ------------[ cut here ]------------ [ 362.291525] kernel BUG at arch/arm64/kernel/cpufeature.c:886! [ 362.292023] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 362.292400] Modules linked in: [ 362.292970] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.6.0-rc4-00003-gc780b890948a #105 [ 362.293136] Hardware name: Foundation-v8A (DT) [ 362.293382] pstate: 200001c5 (nzCv dAIF -PAN -UAO) [ 362.294063] pc : has_cpuid_feature+0xf0/0x348 [ 362.294177] lr : verify_local_elf_hwcaps+0x84/0xe8 [ 362.294280] sp : ffff800011b1bf60 [ 362.294362] x29: ffff800011b1bf60 x28: 0000000000000000 [ 362.294534] x27: 0000000000000000 x26: 0000000000000000 [ 362.294631] x25: 0000000000000000 x24: ffff80001189a25c [ 362.294718] x23: 0000000000000000 x22: 0000000000000000 [ 362.294803] x21: ffff8000114aa018 x20: ffff800011156a00 [ 362.294897] x19: ffff800010c944a0 x18: 0000000000000004 [ 362.294987] x17: 0000000000000000 x16: 0000000000000000 [ 362.295073] x15: 00004e53b831ae3c x14: 00004e53b831ae3c [ 362.295165] x13: 0000000000000384 x12: 0000000000000000 [ 362.295251] x11: 0000000000000000 x10: 00400032b5503510 [ 362.295334] x9 : 0000000000000000 x8 : ffff800010c7e204 [ 362.295426] x7 : 00000000410fd0f0 x6 : 0000000000000001 [ 362.295508] x5 : 00000000410fd0f0 x4 : 0000000000000000 [ 362.295592] x3 : 0000000000000000 x2 : ffff8000100939d8 [ 362.295683] x1 : 0000000000180420 x0 : 0000000000180480 [ 362.296011] Call trace: [ 362.296257] has_cpuid_feature+0xf0/0x348 [ 362.296350] verify_local_elf_hwcaps+0x84/0xe8 [ 362.296424] check_local_cpu_capabilities+0x44/0x128 [ 362.296497] secondary_start_kernel+0xf4/0x188 [ 362.296998] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000) [ 362.298652] SMP: stopping secondary CPUs [ 362.300615] Starting crashdump kernel... [ 362.301168] Bye! [ 0.000000] Booting Linux on physical CPU 0x0000000003 [0x410fd0f0] [ 0.000000] Linux version 5.6.0-rc4-00003-gc780b890948a (crimar01@e120937-lin) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #105 SMP PREEMPT Fri Mar 6 17:00:42 GMT 2020 [ 0.000000] Machine model: Foundation-v8A [ 0.000000] earlycon: pl11 at MMIO 0x000000001c090000 (options '') [ 0.000000] printk: bootconsole [pl11] enabled ..... [ 0.138024] rcu: Hierarchical SRCU implementation. [ 0.153472] its@2f020000: unable to locate ITS domain [ 0.154078] its@2f020000: Unable to locate ITS domain [ 0.157541] EFI services will not be available. [ 0.175395] smp: Bringing up secondary CPUs ... [ 0.209182] psci: failed to boot CPU1 (-22) [ 0.209377] CPU1: failed to boot: -22 [ 0.274598] Detected PIPT I-cache on CPU2 [ 0.278707] GICv3: CPU2: found redistributor 1 region 0:0x000000002f120000 [ 0.285212] CPU2: Booted secondary processor 0x0000000001 [0x410fd0f0] [ 0.369053] Detected PIPT I-cache on CPU3 [ 0.372947] GICv3: CPU3: found redistributor 2 region 0:0x000000002f140000 [ 0.378664] CPU3: Booted secondary processor 0x0000000002 [0x410fd0f0] [ 0.401707] smp: Brought up 1 node, 3 CPUs [ 0.404057] SMP: Total of 3 processors activated. Make crash_smp_send_stop() account also for the online status of the calling CPU while evaluating how many CPUs are effectively online: this way the right number of STOPs is sent and all other stopped-cores's registers are properly saved. Fixes: 78fd584cdec05 ("arm64: kdump: implement machine_crash_shutdown()") Acked-by: Mark Rutland Signed-off-by: Cristian Marussi Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman

arm64: smp: fix smp_send_stop() behaviour

2020-03-25T07:25:59+00:00

commit d0bab0c39e32d39a8c5cddca72e5b4a3059fe050 upstream. On a system with only one CPU online, when another one CPU panics while starting-up, smp_send_stop() will fail to send any STOP message to the other already online core, resulting in a system still responsive and alive at the end of the panic procedure. [ 186.700083] CPU3: shutdown [ 187.075462] CPU2: shutdown [ 187.162869] CPU1: shutdown [ 188.689998] ------------[ cut here ]------------ [ 188.691645] kernel BUG at arch/arm64/kernel/cpufeature.c:886! [ 188.692079] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 188.692444] Modules linked in: [ 188.693031] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.6.0-rc4-00001-g338d25c35a98 #104 [ 188.693175] Hardware name: Foundation-v8A (DT) [ 188.693492] pstate: 200001c5 (nzCv dAIF -PAN -UAO) [ 188.694183] pc : has_cpuid_feature+0xf0/0x348 [ 188.694311] lr : verify_local_elf_hwcaps+0x84/0xe8 [ 188.694410] sp : ffff800011b1bf60 [ 188.694536] x29: ffff800011b1bf60 x28: 0000000000000000 [ 188.694707] x27: 0000000000000000 x26: 0000000000000000 [ 188.694801] x25: 0000000000000000 x24: ffff80001189a25c [ 188.694905] x23: 0000000000000000 x22: 0000000000000000 [ 188.694996] x21: ffff8000114aa018 x20: ffff800011156a38 [ 188.695089] x19: ffff800010c944a0 x18: 0000000000000004 [ 188.695187] x17: 0000000000000000 x16: 0000000000000000 [ 188.695280] x15: 0000249dbde5431e x14: 0262cbe497efa1fa [ 188.695371] x13: 0000000000000002 x12: 0000000000002592 [ 188.695472] x11: 0000000000000080 x10: 00400032b5503510 [ 188.695572] x9 : 0000000000000000 x8 : ffff800010c80204 [ 188.695659] x7 : 00000000410fd0f0 x6 : 0000000000000001 [ 188.695750] x5 : 00000000410fd0f0 x4 : 0000000000000000 [ 188.695836] x3 : 0000000000000000 x2 : ffff8000100939d8 [ 188.695919] x1 : 0000000000180420 x0 : 0000000000180480 [ 188.696253] Call trace: [ 188.696410] has_cpuid_feature+0xf0/0x348 [ 188.696504] verify_local_elf_hwcaps+0x84/0xe8 [ 188.696591] check_local_cpu_capabilities+0x44/0x128 [ 188.696666] secondary_start_kernel+0xf4/0x188 [ 188.697150] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000) [ 188.698639] ---[ end trace 3f12ca47652f7b72 ]--- [ 188.699160] Kernel panic - not syncing: Attempted to kill the idle task! [ 188.699546] Kernel Offset: disabled [ 188.699828] CPU features: 0x00004,20c02008 [ 188.700012] Memory Limit: none [ 188.700538] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]--- [root@arch ~]# echo Helo Helo [root@arch ~]# cat /proc/cpuinfo | grep proce processor : 0 Make smp_send_stop() account also for the online status of the calling CPU while evaluating how many CPUs are effectively online: this way, the right number of STOPs is sent, so enforcing a proper freeze of the system at the end of panic even under the above conditions. Fixes: 08e875c16a16c ("arm64: SMP support") Reported-by: Dave Martin Acked-by: Mark Rutland Signed-off-by: Cristian Marussi Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman

x86/mm: split vmalloc_sync_all()

2020-03-25T07:25:58+00:00

commit 763802b53a427ed3cbd419dbba255c414fdd9e7c upstream. Commit 3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()") introduced a call to vmalloc_sync_all() in the vunmap() code-path. While this change was necessary to maintain correctness on x86-32-pae kernels, it also adds additional cycles for architectures that don't need it. Specifically on x86-64 with CONFIG_VMAP_STACK=y some people reported severe performance regressions in micro-benchmarks because it now also calls the x86-64 implementation of vmalloc_sync_all() on vunmap(). But the vmalloc_sync_all() implementation on x86-64 is only needed for newly created mappings. To avoid the unnecessary work on x86-64 and to gain the performance back, split up vmalloc_sync_all() into two functions: * vmalloc_sync_mappings(), and * vmalloc_sync_unmappings() Most call-sites to vmalloc_sync_all() only care about new mappings being synchronized. The only exception is the new call-site added in the above mentioned commit. Shile Zhang directed us to a report of an 80% regression in reaim throughput. Fixes: 3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()") Reported-by: kernel test robot Reported-by: Shile Zhang Signed-off-by: Joerg Roedel Signed-off-by: Andrew Morton Tested-by: Borislav Petkov Acked-by: Rafael J. Wysocki [GHES] Cc: Dave Hansen Cc: Andy Lutomirski Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Link: http://lkml.kernel.org/r/20191009124418.8286-1-joro@8bytes.org Link: https://lists.01.org/hyperkitty/list/lkp@lists.01.org/thread/4D3JPPHBNOSPFK2KEPC6KGKS6J25AIDB/ Link: http://lkml.kernel.org/r/20191113095530.228959-1-shile.zhang@linux.alibaba.com Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

arm64: compat: Fix syscall number of compat_clock_getres

2020-03-25T07:25:56+00:00

commit 3568b88944fef28db3ee989b957da49ffc627ede upstream. The syscall number of compat_clock_getres was erroneously set to 247 (__NR_io_cancel!) instead of 264. This causes the vDSO fallback of clock_getres() to land on the wrong syscall for compat tasks. Fix the numbering. Cc: Fixes: 53c489e1dfeb6 ("arm64: compat: Add missing syscall numbers") Acked-by: Catalin Marinas Reviewed-by: Nick Desaulniers Signed-off-by: Vincenzo Frascino Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman