BMC/Intel-BMC/linux.git/arch/x86/xen, branch dev

Merge tag 'for-linus-4.2-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

2015-08-20T19:21:26+00:00

Pull xen build fix from David Vrabel: "Fix i386 build with an (uncommon) configuration" * tag 'for-linus-4.2-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: make CONFIG_XEN depend on CONFIG_X86_LOCAL_APIC

x86/xen: make CONFIG_XEN depend on CONFIG_X86_LOCAL_APIC

2015-08-20T10:45:43+00:00

Since commit feb44f1f7a4ac299d1ab1c3606860e70b9b89d69 (x86/xen: Provide a "Xen PV" APIC driver to support >255 VCPUs) Xen guests need a full APIC driver and thus should depend on X86_LOCAL_APIC. This fixes an i386 build failure with !SMP && !CONFIG_X86_UP_APIC by disabling Xen support in this configuration. Users needing Xen support in a non-SMP i386 kernel will need to enable CONFIG_X86_UP_APIC. Signed-off-by: David Vrabel Cc:

Merge tag 'for-linus-4.2-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

2015-08-13T20:36:22+00:00

Pull xen bug fixes from David Vrabel: - revert a fix from 4.2-rc5 that was causing lots of WARNING spam. - fix a memory leak affecting backends in HVM guests. - fix PV domU hang with certain configurations. * tag 'for-linus-4.2-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: Don't leak memory when unmapping the ring on HVM backend Revert "xen/events/fifo: Handle linked events when closing a port" x86/xen: build "Xen PV" APIC driver for domU as well

x86/xen: build "Xen PV" APIC driver for domU as well

2015-08-10T14:33:10+00:00

It turns out that a PV domU also requires the "Xen PV" APIC driver. Otherwise, the flat driver is used and we get stuck in busy loops that never exit, such as in this stack trace: (gdb) target remote localhost:9999 Remote debugging using localhost:9999 __xapic_wait_icr_idle () at ./arch/x86/include/asm/ipi.h:56 56 while (native_apic_mem_read(APIC_ICR) & APIC_ICR_BUSY) (gdb) bt #0 __xapic_wait_icr_idle () at ./arch/x86/include/asm/ipi.h:56 #1 __default_send_IPI_shortcut (shortcut=, dest=, vector=) at ./arch/x86/include/asm/ipi.h:75 #2 apic_send_IPI_self (vector=246) at arch/x86/kernel/apic/probe_64.c:54 #3 0xffffffff81011336 in arch_irq_work_raise () at arch/x86/kernel/irq_work.c:47 #4 0xffffffff8114990c in irq_work_queue (work=0xffff88000fc0e400) at kernel/irq_work.c:100 #5 0xffffffff8110c29d in wake_up_klogd () at kernel/printk/printk.c:2633 #6 0xffffffff8110ca60 in vprintk_emit (facility=0, level=, dict=0x0 , dictlen=, fmt=, args=) at kernel/printk/printk.c:1778 #7 0xffffffff816010c8 in printk (fmt=) at kernel/printk/printk.c:1868 #8 0xffffffffc00013ea in ?? () #9 0x0000000000000000 in ?? () Mailing-list-thread: https://lkml.org/lkml/2015/8/4/755 Signed-off-by: Jason A. Donenfeld Cc: Signed-off-by: David Vrabel

x86/xen: Probe target addresses in set_aliased_prot() before the hypercall

2015-07-31T08:23:22+00:00

The update_va_mapping hypercall can fail if the VA isn't present in the guest's page tables. Under certain loads, this can result in an OOPS when the target address is in unpopulated vmap space. While we're at it, add comments to help explain what's going on. This isn't a great long-term fix. This code should probably be changed to use something like set_memory_ro. Signed-off-by: Andy Lutomirski Cc: Andrew Cooper Cc: Andy Lutomirski Cc: Boris Ostrovsky Cc: Borislav Petkov Cc: Brian Gerst Cc: David Vrabel Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Jan Beulich Cc: Konrad Rzeszutek Wilk Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Sasha Levin Cc: Steven Rostedt Cc: Thomas Gleixner Cc: security@kernel.org Cc: Cc: xen-devel Link: http://lkml.kernel.org/r/0b0e55b995cda11e7829f140b833ef932fcabe3a.1438291540.git.luto@kernel.org Signed-off-by: Ingo Molnar

Merge branch 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2015-06-23T00:59:09+00:00

Pull x86 core updates from Ingo Molnar: "There were so many changes in the x86/asm, x86/apic and x86/mm topics in this cycle that the topical separation of -tip broke down somewhat - so the result is a more traditional architecture pull request, collected into the 'x86/core' topic. The topics were still maintained separately as far as possible, so bisectability and conceptual separation should still be pretty good - but there were a handful of merge points to avoid excessive dependencies (and conflicts) that would have been poorly tested in the end. The next cycle will hopefully be much more quiet (or at least will have fewer dependencies). The main changes in this cycle were: * x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas Gleixner) - This is the second and most intrusive part of changes to the x86 interrupt handling - full conversion to hierarchical interrupt domains: [IOAPIC domain] ----- | [MSI domain] --------[Remapping domain] ----- [ Vector domain ] | (optional) | [HPET MSI domain] ----- | | [DMAR domain] ----------------------------- | [Legacy domain] ----------------------------- This now reflects the actual hardware and allowed us to distangle the domain specific code from the underlying parent domain, which can be optional in the case of interrupt remapping. It's a clear separation of functionality and removes quite some duct tape constructs which plugged the remap code between ioapic/msi/hpet and the vector management. - Intel IOMMU IRQ remapping enhancements, to allow direct interrupt injection into guests (Feng Wu) * x86/asm changes: - Tons of cleanups and small speedups, micro-optimizations. This is in preparation to move a good chunk of the low level entry code from assembly to C code (Denys Vlasenko, Andy Lutomirski, Brian Gerst) - Moved all system entry related code to a new home under arch/x86/entry/ (Ingo Molnar) - Removal of the fragile and ugly CFI dwarf debuginfo annotations. Conversion to C will reintroduce many of them - but meanwhile they are only getting in the way, and the upstream kernel does not rely on them (Ingo Molnar) - NOP handling refinements. (Borislav Petkov) * x86/mm changes: - Big PAT and MTRR rework: making the code more robust and preparing to phase out exposing direct MTRR interfaces to drivers - in favor of using PAT driven interfaces (Toshi Kani, Luis R Rodriguez, Borislav Petkov) - New ioremap_wt()/set_memory_wt() interfaces to support Write-Through cached memory mappings. This is especially important for good performance on NVDIMM hardware (Toshi Kani) * x86/ras changes: - Add support for deferred errors on AMD (Aravind Gopalakrishnan) This is an important RAS feature which adds hardware support for poisoned data. That means roughly that the hardware marks data which it has detected as corrupted but wasn't able to correct, as poisoned data and raises an APIC interrupt to signal that in the form of a deferred error. It is the OS's responsibility then to take proper recovery action and thus prolonge system lifetime as far as possible. - Add support for Intel "Local MCE"s: upcoming CPUs will support CPU-local MCE interrupts, as opposed to the traditional system- wide broadcasted MCE interrupts (Ashok Raj) - Misc cleanups (Borislav Petkov) * x86/platform changes: - Intel Atom SoC updates ... and lots of other cleanups, fixlets and other changes - see the shortlog and the Git log for details" * 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits) x86/hpet: Use proper hpet device number for MSI allocation x86/hpet: Check for irq==0 when allocating hpet MSI interrupts x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail genirq: Prevent crash in irq_move_irq() genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain iommu, x86: Properly handle posted interrupts for IOMMU hotplug iommu, x86: Provide irq_remapping_cap() interface iommu, x86: Setup Posted-Interrupts capability for Intel iommu iommu, x86: Add cap_pi_support() to detect VT-d PI capability iommu, x86: Avoid migrating VT-d posted interrupts iommu, x86: Save the mode (posted or remapped) of an IRTE iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip iommu: dmar: Provide helper to copy shared irte fields iommu: dmar: Extend struct irte for VT-d Posted-Interrupts iommu: Add new member capability to struct irq_remap_ops x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry() ...

Merge branch 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2015-06-23T00:16:11+00:00

Pull x86 FPU updates from Ingo Molnar: "This tree contains two main changes: - The big FPU code rewrite: wide reaching cleanups and reorganization that pulls all the FPU code together into a clean base in arch/x86/fpu/. The resulting code is leaner and faster, and much easier to understand. This enables future work to further simplify the FPU code (such as removing lazy FPU restores). By its nature these changes have a substantial regression risk: FPU code related bugs are long lived, because races are often subtle and bugs mask as user-space failures that are difficult to track back to kernel side backs. I'm aware of no unfixed (or even suspected) FPU related regression so far. - MPX support rework/fixes. As this is still not a released CPU feature, there were some buglets in the code - should be much more robust now (Dave Hansen)" * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (250 commits) x86/fpu: Fix double-increment in setup_xstate_features() x86/mpx: Allow 32-bit binaries on 64-bit kernels again x86/mpx: Do not count MPX VMAs as neighbors when unmapping x86/mpx: Rewrite the unmap code x86/mpx: Support 32-bit binaries on 64-bit kernels x86/mpx: Use 32-bit-only cmpxchg() for 32-bit apps x86/mpx: Introduce new 'directory entry' to 'addr' helper function x86/mpx: Add temporary variable to reduce masking x86: Make is_64bit_mm() widely available x86/mpx: Trace allocation of new bounds tables x86/mpx: Trace the attempts to find bounds tables x86/mpx: Trace entry to bounds exception paths x86/mpx: Trace #BR exceptions x86/mpx: Introduce a boot-time disable flag x86/mpx: Restrict the mmap() size check to bounds tables x86/mpx: Remove redundant MPX_BNDCFG_ADDR_MASK x86/mpx: Clean up the code by not passing a task pointer around when unnecessary x86/mpx: Use the new get_xsave_field_ptr()API x86/fpu/xstate: Wrap get_xsave_addr() to make it safer x86/fpu/xstate: Fix up bad get_xsave_addr() assumptions ...

Merge branches 'x86/apic', 'x86/asm', 'x86/mm' and 'x86/platform' into x86/core, to merge last updates

2015-06-22T07:15:03+00:00

Signed-off-by: Ingo Molnar

Merge branch 'x86/asm' into x86/core, to prepare for new patch

2015-06-08T18:48:20+00:00

Collect all changes to arch/x86/entry/entry_64.S, before applying patch that changes most of the file. Signed-off-by: Ingo Molnar

x86/asm/entry: Untangle 'system_call' into two entry points: entry_SYSCALL_64 and entry_INT80_32

2015-06-08T07:14:21+00:00

The 'system_call' entry points differ starkly between native 32-bit and 64-bit kernels: on 32-bit kernels it defines the INT 0x80 entry point, while on 64-bit it's the SYSCALL entry point. This is pretty confusing when looking at generic code, and it also obscures the nature of the entry point at the assembly level. So unangle this by splitting the name into its two uses: system_call (32) -> entry_INT80_32 system_call (64) -> entry_SYSCALL_64 As per the generic naming scheme for x86 system call entry points: entry_MNEMONIC_qualifier where 'qualifier' is one of _32, _64 or _compat. Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar