BMC/Intel-BMC/linux.git/arch/x86/kvm/emulate.c, branch dev

KVM: x86: save/load state on SMM switch

2015-06-04T14:17:46+00:00

The big ugly one. This patch adds support for switching in and out of system management mode, respectively upon receiving KVM_REQ_SMI and upon executing a RSM instruction. Both 32- and 64-bit formats are supported for the SMM state save area. Reviewed-by: Radim Krčmář Signed-off-by: Paolo Bonzini

KVM: x86: stubs for SMM support

2015-06-04T14:01:45+00:00

This patch adds the interface between x86.c and the emulator: the SMBASE register, a new emulator flag, the RSM instruction. It also adds a new request bit that will be used by the KVM_SMI ioctl. Reviewed-by: Radim Krčmář Signed-off-by: Paolo Bonzini

KVM: x86: pass the whole hflags field to emulator and back

2015-06-04T14:01:05+00:00

The hflags field will contain information about system management mode and will be useful for the emulator. Pass the entire field rather than just the guest-mode information. Reviewed-by: Radim Krčmář Signed-off-by: Paolo Bonzini

KVM: x86: Fix zero iterations REP-string

2015-05-19T18:52:36+00:00

When a REP-string is executed in 64-bit mode with an address-size prefix, ECX/EDI/ESI are used as counter and pointers. When ECX is initially zero, Intel CPUs clear the high 32-bits of RCX, and recent Intel CPUs update the high bits of the pointers in MOVS/STOS. This behavior is specific to Intel according to few experiments. As one may guess, this is an undocumented behavior. Yet, it is observable in the guest, since at least VMX traps REP-INS/OUTS even when ECX=0. Note that VMware appears to get it right. The behavior can be observed using the following code: #include #define LOW_MASK (0xffffffff00000000ull) #define ALL_MASK (0xffffffffffffffffull) #define TEST(opcode) \ do { \ asm volatile(".byte 0xf2 \n\t .byte 0x67 \n\t .byte " opcode "\n\t" \ : "=S"(s), "=c"(c), "=D"(d) \ : "S"(ALL_MASK), "c"(LOW_MASK), "D"(ALL_MASK)); \ printf("opcode %s rcx=%llx rsi=%llx rdi=%llx\n", \ opcode, c, s, d); \ } while(0) void main() { unsigned long long s, d, c; iopl(3); TEST("0x6c"); TEST("0x6d"); TEST("0x6e"); TEST("0x6f"); TEST("0xa4"); TEST("0xa5"); TEST("0xa6"); TEST("0xa7"); TEST("0xaa"); TEST("0xab"); TEST("0xae"); TEST("0xaf"); } Signed-off-by: Nadav Amit Signed-off-by: Paolo Bonzini

KVM: x86: Fix update RCX/RDI/RSI on REP-string

2015-05-19T18:52:35+00:00

When REP-string instruction is preceded with an address-size prefix, ECX/EDI/ESI are used as the operation counter and pointers. When they are updated, the high 32-bits of RCX/RDI/RSI are cleared, similarly to the way they are updated on every 32-bit register operation. Fix it. Signed-off-by: Nadav Amit Signed-off-by: Paolo Bonzini

KVM: x86: Fix DR7 mask on task-switch while debugging

2015-05-19T18:52:35+00:00

If the host sets hardware breakpoints to debug the guest, and a task-switch occurs in the guest, the architectural DR7 will not be updated. The effective DR7 would be updated instead. This fix puts the DR7 update during task-switch emulation, so it now uses the standard DR setting mechanism instead of the one that was previously used. As a bonus, the update of DR7 will now be effective for AMD as well. Signed-off-by: Nadav Amit Signed-off-by: Paolo Bonzini

KVM: x86: Call-far should not be emulated as stack op

2015-05-08T08:51:44+00:00

Far call in 64-bit has a 32-bit operand size. Remove the marking of this operation as Stack so it can be emulated correctly in 64-bit. Signed-off-by: Nadav Amit Signed-off-by: Paolo Bonzini

kvm: x86: fix x86 eflags fixed bit

2015-04-08T08:46:52+00:00

Guest can't be booted w/ ept=0, there is a message dumped as below: If you're running a guest on an Intel machine without unrestricted mode support, the failure can be most likely due to the guest entering an invalid state for Intel VT. For example, the guest maybe running in big real mode which is not supported on less recent Intel processors. EAX=00000011 EBX=f000d2f6 ECX=00006cac EDX=000f8956 ESI=bffbdf62 EDI=00000000 EBP=00006c68 ESP=00006c68 EIP=0000d187 EFL=00000004 [-----P-] CPL=0 II=0 A20=1 SMM=0 HLT=0 ES =e000 000e0000 ffffffff 00809300 DPL=0 DS16 [-WA] CS =f000 000f0000 ffffffff 00809b00 DPL=0 CS16 [-RA] SS =0000 00000000 ffffffff 00809300 DPL=0 DS16 [-WA] DS =0000 00000000 ffffffff 00809300 DPL=0 DS16 [-WA] FS =0000 00000000 ffffffff 00809300 DPL=0 DS16 [-WA] GS =0000 00000000 ffffffff 00809300 DPL=0 DS16 [-WA] LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy GDT= 000f6a80 00000037 IDT= 000f6abe 00000000 CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000 DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000 DR6=00000000ffff0ff0 DR7=0000000000000400 EFER=0000000000000000 Code=01 1e b8 6a 2e 0f 01 16 74 6a 0f 20 c0 66 83 c8 01 0f 22 c0 <66> ea 8f d1 0f 00 08 00 b8 10 00 00 00 8e d8 8e c0 8e d0 8e e0 8e e8 89 c8 ff e2 89 c1 b8X X86 eflags bit 1 is fixed set, which means that 1 << 1 is set instead of 1, this patch fix it. Signed-off-by: Wanpeng Li Message-Id: <1428473294-6633-1-git-send-email-wanpeng.li@linux.intel.com> Signed-off-by: Paolo Bonzini

KVM: remove useless check of "ret" variable prior to returning the same value

2015-03-30T14:57:15+00:00

A trivial code cleanup. This `if` is redundant. Signed-off-by: Eugene Korenevsky Message-Id: <20150328222717.GA6508@gnote> Signed-off-by: Paolo Bonzini

KVM: x86: Remove redundant definitions

2015-03-30T14:46:42+00:00

Some constants are redfined in emulate.c. Avoid it. s/SELECTOR_RPL_MASK/SEGMENT_RPL_MASK s/SELECTOR_TI_MASK/SEGMENT_TI_MASK No functional change. Signed-off-by: Nadav Amit Message-Id: <1427635984-8113-3-git-send-email-namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini