BMC/Intel-BMC/linux.git/arch/x86/kernel, branch dev-4.19

x86/kexec: Don't setup EFI info if EFI runtime is not enabled

2019-03-13T21:02:32+00:00

[ Upstream commit 2aa958c99c7fd3162b089a1a56a34a0cdb778de1 ] Kexec-ing a kernel with "efi=noruntime" on the first kernel's command line causes the following null pointer dereference: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 #PF error: [normal kernel read fault] Call Trace: efi_runtime_map_copy+0x28/0x30 bzImage64_load+0x688/0x872 arch_kexec_kernel_image_load+0x6d/0x70 kimage_file_alloc_init+0x13e/0x220 __x64_sys_kexec_file_load+0x144/0x290 do_syscall_64+0x55/0x1a0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Just skip the EFI info setup if EFI runtime services are not enabled. [ bp: Massage commit message. ] Suggested-by: Dave Young Signed-off-by: Kairui Song Signed-off-by: Borislav Petkov Acked-by: Dave Young Cc: AKASHI Takahiro Cc: Andrew Morton Cc: Ard Biesheuvel Cc: bhe@redhat.com Cc: David Howells Cc: erik.schmauss@intel.com Cc: fanc.fnst@cn.fujitsu.com Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: kexec@lists.infradead.org Cc: lenb@kernel.org Cc: linux-acpi@vger.kernel.org Cc: Philipp Rudo Cc: rafael.j.wysocki@intel.com Cc: robert.moore@intel.com Cc: Thomas Gleixner Cc: x86-ml Cc: Yannik Sembritzki Link: https://lkml.kernel.org/r/20190118111310.29589-2-kasong@redhat.com Signed-off-by: Sasha Levin

x86/microcode/amd: Don't falsely trick the late loading mechanism

2019-03-13T21:02:31+00:00

[ Upstream commit 912139cfbfa6a2bc1da052314d2c29338dae1f6a ] The load_microcode_amd() function searches for microcode patches and attempts to apply a microcode patch if it is of different level than the currently installed level. While the processor won't actually load a level that is less than what is already installed, the logic wrongly returns UCODE_NEW thus signaling to its caller reload_store() that a late loading should be attempted. If the file-system contains an older microcode revision than what is currently running, such a late microcode reload can result in these misleading messages: x86/CPU: CPU features have changed after loading microcode, but might not take effect. x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update. These messages were issued on a system where SME/SEV are not enabled by the BIOS (MSR C001_0010[23] = 0b) because during boot, early_detect_mem_encrypt() is called and cleared the SME and SEV features in this case. However, after the wrong late load attempt, get_cpu_cap() is called and reloads the SME and SEV feature bits, resulting in the messages. Update the microcode level check to not attempt microcode loading if the current level is greater than(!) and not only equal to the current patch level. [ bp: massage commit message. ] Fixes: 2613f36ed965 ("x86/microcode: Attempt late loading only when new microcode is present") Signed-off-by: Tom Lendacky Signed-off-by: Borislav Petkov Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: Thomas Gleixner Cc: x86-ml Link: https://lkml.kernel.org/r/154894518427.9406.8246222496874202773.stgit@tlendack-t1.amdoffice.net Signed-off-by: Sasha Levin

x86/CPU/AMD: Set the CPB bit unconditionally on F17h

2019-03-10T06:17:20+00:00

commit 0237199186e7a4aa5310741f0a6498a20c820fd7 upstream. Some F17h models do not have CPB set in CPUID even though the CPU supports it. Set the feature bit unconditionally on all F17h. [ bp: Rewrite commit message and patch. ] Signed-off-by: Jiaxun Yang Signed-off-by: Borislav Petkov Acked-by: Tom Lendacky Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: Sherry Hurwitz Cc: Suravee Suthikulpanit Cc: Thomas Gleixner Cc: x86-ml Link: https://lkml.kernel.org/r/20181120030018.5185-1-jiaxun.yang@flygoat.com Signed-off-by: Greg Kroah-Hartman

irq/matrix: Spread managed interrupts on allocation

2019-03-05T16:58:45+00:00

[ Upstream commit 76f99ae5b54d48430d1f0c5512a84da0ff9761e0 ] Linux spreads out the non managed interrupt across the possible target CPUs to avoid vector space exhaustion. Managed interrupts are treated differently, as for them the vectors are reserved (with guarantee) when the interrupt descriptors are initialized. When the interrupt is requested a real vector is assigned. The assignment logic uses the first CPU in the affinity mask for assignment. If the interrupt has more than one CPU in the affinity mask, which happens when a multi queue device has less queues than CPUs, then doing the same search as for non managed interrupts makes sense as it puts the interrupt on the least interrupt plagued CPU. For single CPU affine vectors that's obviously a NOOP. Restructre the matrix allocation code so it does the 'best CPU' search, add the sanity check for an empty affinity mask and adapt the call site in the x86 vector management code. [ tglx: Added the empty mask check to the core and improved change log ] Signed-off-by: Dou Liyang Signed-off-by: Thomas Gleixner Cc: hpa@zytor.com Link: https://lkml.kernel.org/r/20180908175838.14450-2-dou_liyang@163.com Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

x86/MCE: Initialize mce.bank in the case of a fatal error in mce_no_way_out()

2019-02-12T18:47:26+00:00

commit d28af26faa0b1daf3c692603d46bc4687c16f19e upstream. Internal injection testing crashed with a console log that said: mce: [Hardware Error]: CPU 7: Machine Check Exception: f Bank 0: bd80000000100134 This caused a lot of head scratching because the MCACOD (bits 15:0) of that status is a signature from an L1 data cache error. But Linux says that it found it in "Bank 0", which on this model CPU only reports L1 instruction cache errors. The answer was that Linux doesn't initialize "m->bank" in the case that it finds a fatal error in the mce_no_way_out() pre-scan of banks. If this was a local machine check, then this partially initialized struct mce is being passed to mce_panic(). Fix is simple: just initialize m->bank in the case of a fatal error. Fixes: 40c36e2741d7 ("x86/mce: Fix incorrect "Machine check from unknown source" message") Signed-off-by: Tony Luck Signed-off-by: Borislav Petkov Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Vishal Verma Cc: x86-ml Cc: stable@vger.kernel.org # v4.18 Note pre-v5.0 arch/x86/kernel/cpu/mce/core.c was called arch/x86/kernel/cpu/mcheck/mce.c Link: https://lkml.kernel.org/r/20190201003341.10638-1-tony.luck@intel.com Signed-off-by: Greg Kroah-Hartman

cpu/hotplug: Fix "SMT disabled by BIOS" detection for KVM

2019-02-12T18:47:25+00:00

commit b284909abad48b07d3071a9fc9b5692b3e64914b upstream. With the following commit: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") ... the hotplug code attempted to detect when SMT was disabled by BIOS, in which case it reported SMT as permanently disabled. However, that code broke a virt hotplug scenario, where the guest is booted with only primary CPU threads, and a sibling is brought online later. The problem is that there doesn't seem to be a way to reliably distinguish between the HW "SMT disabled by BIOS" case and the virt "sibling not yet brought online" case. So the above-mentioned commit was a bit misguided, as it permanently disabled SMT for both cases, preventing future virt sibling hotplugs. Going back and reviewing the original problems which were attempted to be solved by that commit, when SMT was disabled in BIOS: 1) /sys/devices/system/cpu/smt/control showed "on" instead of "notsupported"; and 2) vmx_vm_init() was incorrectly showing the L1TF_MSG_SMT warning. I'd propose that we instead consider #1 above to not actually be a problem. Because, at least in the virt case, it's possible that SMT wasn't disabled by BIOS and a sibling thread could be brought online later. So it makes sense to just always default the smt control to "on" to allow for that possibility (assuming cpuid indicates that the CPU supports SMT). The real problem is #2, which has a simple fix: change vmx_vm_init() to query the actual current SMT state -- i.e., whether any siblings are currently online -- instead of looking at the SMT "control" sysfs value. So fix it by: a) reverting the original "fix" and its followup fix: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") bc2d8d262cba ("cpu/hotplug: Fix SMT supported evaluation") and b) changing vmx_vm_init() to query the actual current SMT state -- instead of the sysfs control value -- to determine whether the L1TF warning is needed. This also requires the 'sched_smt_present' variable to exported, instead of 'cpu_smt_control'. Fixes: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") Reported-by: Igor Mammedov Signed-off-by: Josh Poimboeuf Signed-off-by: Thomas Gleixner Cc: Joe Mario Cc: Jiri Kosina Cc: Peter Zijlstra Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/e3a85d585da28cc333ecbc1e78ee9216e6da9396.1548794349.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman

KVM: x86: WARN_ONCE if sending a PV IPI returns a fatal error

2019-01-31T07:14:38+00:00

commit de81c2f912ef57917bdc6d63b410c534c3e07982 upstream. KVM hypercalls return a negative value error code in case of a fatal error, e.g. when the hypercall isn't supported or was made with invalid parameters. WARN_ONCE on fatal errors when sending PV IPIs as any such error all but guarantees an SMP system will hang due to a missing IPI. Fixes: aaffcfd1e82d ("KVM: X86: Implement PV IPIs in linux guest") Cc: stable@vger.kernel.org Cc: Wanpeng Li Signed-off-by: Sean Christopherson Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman

x86/topology: Use total_cpus for max logical packages calculation

2019-01-26T08:32:41+00:00

[ Upstream commit aa02ef099cff042c2a9109782ec2bf1bffc955d4 ] nr_cpu_ids can be limited on the command line via nr_cpus=. This can break the logical package management because it results in a smaller number of packages while in kdump kernel. Check below case: There is a two sockets system, each socket has 8 cores, which has 16 logical cpus while HT was turn on. 0 1 2 3 4 5 6 7 | 16 17 18 19 20 21 22 23 cores on socket 0 threads on socket 0 8 9 10 11 12 13 14 15 | 24 25 26 27 28 29 30 31 cores on socket 1 threads on socket 1 While starting the kdump kernel with command line option nr_cpus=16 panic was triggered on one of the cpus 24-31 eg. 26, then online cpu will be 1-15, 26(cpu 0 was disabled in kdump), ncpus will be 16 and __max_logical_packages will be 1, but actually two packages were booted on. This issue can reproduced by set kdump option nr_cpus=, and then trigger panic on last socket's thread, for example: taskset -c 26 echo c > /proc/sysrq-trigger Use total_cpus which will not be limited by nr_cpus command line to calculate the value of __max_logical_packages. Signed-off-by: Hui Wang Signed-off-by: Thomas Gleixner Cc: Cc: Cc: Cc: Link: https://lkml.kernel.org/r/20181107023643.22174-1-john.wanghui@huawei.com Signed-off-by: Sasha Levin

x86/mce: Fix -Wmissing-prototypes warnings

2019-01-26T08:32:35+00:00

[ Upstream commit 68b5e4326e4b8ac9080835005d8254fed0fb3c56 ] Add the proper includes and make smca_get_name() static. Fix an actual bug too which the warning triggered: arch/x86/kernel/cpu/mcheck/therm_throt.c:395:39: error: conflicting \ types for ‘smp_thermal_interrupt’ asmlinkage __visible void __irq_entry smp_thermal_interrupt(struct pt_regs *r) ^~~~~~~~~~~~~~~~~~~~~ In file included from arch/x86/kernel/cpu/mcheck/therm_throt.c:29: ./arch/x86/include/asm/traps.h:107:17: note: previous declaration of \ ‘smp_thermal_interrupt’ was here asmlinkage void smp_thermal_interrupt(void); Signed-off-by: Borislav Petkov Cc: Yi Wang Cc: Michael Matz Cc: x86@kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1811081633160.1549@nanos.tec.linutronix.de Signed-off-by: Sasha Levin

x86, modpost: Replace last remnants of RETPOLINE with CONFIG_RETPOLINE

2019-01-16T21:04:29+00:00

commit e4f358916d528d479c3c12bd2fd03f2d5a576380 upstream. Commit 4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support") replaced the RETPOLINE define with CONFIG_RETPOLINE checks. Remove the remaining pieces. [ bp: Massage commit message. ] Fixes: 4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support") Signed-off-by: WANG Chao Signed-off-by: Borislav Petkov Reviewed-by: Zhenzhong Duan Reviewed-by: Masahiro Yamada Cc: "H. Peter Anvin" Cc: Andi Kleen Cc: Andrew Morton Cc: Andy Lutomirski Cc: Arnd Bergmann Cc: Daniel Borkmann Cc: David Woodhouse Cc: Geert Uytterhoeven Cc: Jessica Yu Cc: Jiri Kosina Cc: Kees Cook Cc: Konrad Rzeszutek Wilk Cc: Luc Van Oostenryck Cc: Michal Marek Cc: Miguel Ojeda Cc: Peter Zijlstra Cc: Tim Chen Cc: Vasily Gorbik Cc: linux-kbuild@vger.kernel.org Cc: srinivas.eeda@oracle.com Cc: stable Cc: x86-ml Link: https://lkml.kernel.org/r/20181210163725.95977-1-chao.wang@ucloud.cn Signed-off-by: Greg Kroah-Hartman