BMC/Intel-BMC/linux.git/arch/x86/kernel/smp.c, branch dev-5.2

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 82

2019-05-24T15:37:52+00:00

Based on 1 normalized pattern(s): this code is released under the gnu general public license version 2 or later extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Reviewed-by: Armijn Hemel Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520075211.232210963@linutronix.de Signed-off-by: Greg Kroah-Hartman

x86/irq: Let interrupt handlers set kvm_cpu_l1tf_flush_l1d

2018-08-05T07:53:13+00:00

The last missing piece to having vmx_l1d_flush() take interrupts after VMEXIT into account is to set the kvm_cpu_l1tf_flush_l1d per-cpu flag on irq entry. Issue calls to kvm_set_cpu_l1tf_flush_l1d() from entering_irq(), ipi_entering_ack_irq(), smp_reschedule_interrupt() and uv_bau_message_interrupt(). Suggested-by: Paolo Bonzini Signed-off-by: Nicolai Stange Signed-off-by: Thomas Gleixner

x86/tracing: Disentangle pagefault and resched IPI tracing key

2017-08-29T09:42:29+00:00

The pagefault and the resched IPI handler are the only ones where it is worth to optimize the code further in case tracepoints are disabled. But it makes no sense to have a single static key for both. Seperate the static keys so the facilities are handled seperately. Signed-off-by: Thomas Gleixner Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Steven Rostedt Link: http://lkml.kernel.org/r/20170828064957.536699116@linutronix.de Signed-off-by: Ingo Molnar

x86/smp: Use static key for reschedule interrupt tracing

2017-08-29T09:42:27+00:00

It's worth to avoid the extra irq_enter()/irq_exit() pair in the case that the reschedule interrupt tracepoints are disabled. Use the static key which indicates that exception tracing is enabled. For now this key is global. It will be optimized in a later step. Signed-off-by: Thomas Gleixner Reviewed-by: Steven Rostedt (VMware) Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20170828064957.299808677@linutronix.de Signed-off-by: Ingo Molnar

x86/smp: Remove pointless duplicated interrupt code

2017-08-29T09:42:27+00:00

Two NOP5s are really a good tradeoff vs. the unholy IDT switching mess, which duplicates code all over the place. The rescheduling interrupt gets optimized in a later step. Make the ordering of function call and statistics increment the same as in other places. Calculate stats first, then do the function call. Signed-off-by: Thomas Gleixner Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Steven Rostedt Link: http://lkml.kernel.org/r/20170828064957.222101344@linutronix.de Signed-off-by: Ingo Molnar

Merge branch 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-05-02T03:51:12+00:00

Pull x86 boot updates from Ingo Molnar: "The biggest changes in this cycle were: - reworking of the e820 code: separate in-kernel and boot-ABI data structures and apply a whole range of cleanups to the kernel side. No change in functionality. - enable KASLR by default: it's used by all major distros and it's out of the experimental stage as well. - ... misc fixes and cleanups" * 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits) x86/KASLR: Fix kexec kernel boot crash when KASLR randomization fails x86/reboot: Turn off KVM when halting a CPU x86/boot: Fix BSS corruption/overwrite bug in early x86 kernel startup x86: Enable KASLR by default boot/param: Move next_arg() function to lib/cmdline.c for later reuse x86/boot: Fix Sparse warning by including required header file x86/boot/64: Rename start_cpu() x86/xen: Update e820 table handling to the new core x86 E820 code x86/boot: Fix pr_debug() API braindamage xen, x86/headers: Add dependency to x86/boot/e820: Simplify e820__update_table() x86/boot/e820: Separate the E820 ABI structures from the in-kernel structures x86/boot/e820: Fix and clean up e820_type switch() statements x86/boot/e820: Rename the remaining E820 APIs to the e820__*() prefix x86/boot/e820: Remove unnecessary #include's x86/boot/e820: Rename e820_mark_nosave_regions() to e820__register_nosave_regions() x86/boot/e820: Rename e820_reserve_resources*() to e820__reserve_resources*() x86/boot/e820: Use bool in query APIs x86/boot/e820: Document e820__reserve_setup_data() x86/boot/e820: Clean up __e820__update_table() et al ...

sched/x86: Update reschedule warning text

2017-04-20T08:14:30+00:00

Modify the reschedule warning to output the offline CPU number and use a better debug message. Signed-off-by: Prarit Bhargava Cc: Andrew Morton Cc: Daniel Bristot de Oliveira Cc: Hidehiro Kawai Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Steven Rostedt (VMware) Cc: Thomas Gleixner Cc: Wanpeng Li Link: http://lkml.kernel.org/r/1492518305-3808-1-git-send-email-prarit@redhat.com [ Tweaked the warning message. ] Signed-off-by: Ingo Molnar

x86/reboot: Turn off KVM when halting a CPU

2017-04-20T08:06:57+00:00

A CPU in VMX root mode will ignore INIT signals and will fail to bring up the APs after reboot. Therefore, on a panic we disable VMX on all CPUs before rebooting or triggering kdump. Do this when halting the machine as well, in case a firmware-level reboot does not perform a cold reset for all processors. Without doing this, rebooting the host may hang. Signed-off-by: Tiantian Feng Signed-off-by: Xishi Qiu [ Rewritten commit message. ] Signed-off-by: Paolo Bonzini Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: kvm@vger.kernel.org Link: http://lkml.kernel.org/r/20170419161839.30550-1-pbonzini@redhat.com Signed-off-by: Ingo Molnar

x86/irq, trace: Add __irq_entry annotation to x86's platform IRQ handlers

2017-01-05T07:58:49+00:00

This patch adds the __irq_entry annotation to the default x86 platform IRQ handlers. ftrace's function_graph tracer uses the __irq_entry annotation to notify the entry and return of IRQ handlers. For example, before the patch: 354549.667252 | 3) d..1 | default_idle_call() { 354549.667252 | 3) d..1 | arch_cpu_idle() { 354549.667253 | 3) d..1 | default_idle() { 354549.696886 | 3) d..1 | smp_trace_reschedule_interrupt() { 354549.696886 | 3) d..1 | irq_enter() { 354549.696886 | 3) d..1 | rcu_irq_enter() { After the patch: 366416.254476 | 3) d..1 | arch_cpu_idle() { 366416.254476 | 3) d..1 | default_idle() { 366416.261566 | 3) d..1 ==========> | 366416.261566 | 3) d..1 | smp_trace_reschedule_interrupt() { 366416.261566 | 3) d..1 | irq_enter() { 366416.261566 | 3) d..1 | rcu_irq_enter() { KASAN also uses this annotation. The smp_apic_timer_interrupt() was already annotated. Signed-off-by: Daniel Bristot de Oliveira Acked-by: Steven Rostedt (VMware) Cc: Aaron Lu Cc: Andrew Morton Cc: Baoquan He Cc: Borislav Petkov Cc: Claudio Fontana Cc: Denys Vlasenko Cc: Dou Liyang Cc: Gu Zheng Cc: Hidehiro Kawai Cc: Linus Torvalds Cc: Nicolai Stange Cc: Peter Zijlstra (Intel) Cc: Steven Rostedt Cc: Thomas Gleixner Cc: Tony Luck Cc: Wanpeng Li Cc: linux-edac@vger.kernel.org Link: http://lkml.kernel.org/r/059fdf437c2f0c09b13c18c8fe4e69999d3ffe69.1483528431.git.bristot@redhat.com Signed-off-by: Ingo Molnar

x86/apic: Prevent tracing on apic_msr_write_eoi()

2016-11-09T21:03:14+00:00

The following RCU lockdep warning led to adding irq_enter()/irq_exit() into smp_reschedule_interrupt(): RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! no locks held by swapper/1/0. do_trace_write_msr native_write_msr native_apic_msr_eoi_write smp_reschedule_interrupt reschedule_interrupt As Peterz pointed out: | So now we're making a very frequent interrupt slower because of debug | code. | | The thing is, many many smp_reschedule_interrupt() invocations don't | actually execute anything much at all and are only sent to tickle the | return to user path (which does the actual preemption). | | Having to do the whole irq_enter/irq_exit dance just for this unlikely | debug case totally blows. Use the wrmsr_notrace() variant in native_apic_msr_write_eoi, annotate the kvm variant with notrace and add a native_apic_eoi callback to the apic structure so KVM guests are covered as well. This allows to revert the irq_enter/irq_exit dance in smp_reschedule_interrupt(). Suggested-by: Peter Zijlstra Suggested-by: Paolo Bonzini Signed-off-by: Wanpeng Li Acked-by: Paolo Bonzini Cc: kvm@vger.kernel.org Cc: Mike Galbraith Cc: Borislav Petkov Link: http://lkml.kernel.org/r/1478488420-5982-3-git-send-email-wanpeng.li@hotmail.com Signed-off-by: Thomas Gleixner