BMC/Intel-BMC/linux.git/arch/x86/kernel/ftrace.c, branch dev-4.18

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

x86/ftrace: Make sure that ftrace trampolines are not RWX

2017-05-27T02:37:02+00:00

ftrace use module_alloc() to allocate trampoline pages. The mapping of module_alloc() is RWX, which makes sense as the memory is written to right after allocation. But nothing makes these pages RO after writing to them. Add proper set_memory_rw/ro() calls to protect the trampolines after modification. Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1705251056410.1862@nanos Signed-off-by: Thomas Gleixner Signed-off-by: Steven Rostedt (VMware)

x86: use set_memory.h header

2017-05-09T00:15:13+00:00

set_memory_* functions have moved to set_memory.h. Switch to this explicitly. Link: http://lkml.kernel.org/r/1488920133-27229-6-git-send-email-labbott@redhat.com Signed-off-by: Laura Abbott Acked-by: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'trace-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

2017-05-04T01:41:21+00:00

Pull tracing updates from Steven Rostedt: "New features for this release: - Pretty much a full rewrite of the processing of function plugins. i.e. echo do_IRQ:stacktrace > set_ftrace_filter - The rewrite was needed to add plugins to be unique to tracing instances. i.e. mkdir instance/foo; cd instances/foo; echo do_IRQ:stacktrace > set_ftrace_filter The old way was written very hacky. This removes a lot of those hacks. - New "function-fork" tracing option. When set, pids in the set_ftrace_pid will have their children added when the processes with their pids listed in the set_ftrace_pid file forks. - Exposure of "maxactive" for kretprobe in kprobe_events - Allow for builtin init functions to be traced by the function tracer (via the kernel command line). Module init function tracing will come in the next release. - Added more selftests, and have selftests also test in an instance" * tag 'trace-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (60 commits) ring-buffer: Return reader page back into existing ring buffer selftests: ftrace: Allow some event trigger tests to run in an instance selftests: ftrace: Have some basic tests run in a tracing instance too selftests: ftrace: Have event tests also run in an tracing instance selftests: ftrace: Make func_event_triggers and func_traceonoff_triggers tests do instances selftests: ftrace: Allow some tests to be run in a tracing instance tracing/ftrace: Allow for instances to trigger their own stacktrace probes tracing/ftrace: Allow for the traceonoff probe be unique to instances tracing/ftrace: Enable snapshot function trigger to work with instances tracing/ftrace: Allow instances to have their own function probes tracing/ftrace: Add a better way to pass data via the probe functions ftrace: Dynamically create the probe ftrace_ops for the trace_array tracing: Pass the trace_array into ftrace_probe_ops functions tracing: Have the trace_array hold the list of registered func probes ftrace: If the hash for a probe fails to update then free what was initialized ftrace: Have the function probes call their own function ftrace: Have each function probe use its own ftrace_ops ftrace: Have unregister_ftrace_function_probe_func() return a value ftrace: Add helper function ftrace_hash_move_and_update_ops() ftrace: Remove data field from ftrace_func_probe structure ...

x86/build: convert function graph '-Os' error to warning

2017-04-19T07:57:23+00:00

For pre-4.6.0 versions of GCC, which don't have '-mfentry', the '-maccumulate-outgoing-args' option is required for function graph tracing in order to avoid GCC bug 42109. However, GCC ignores '-maccumulate-outgoing-args' when '-Os' is also set. Currently we force a build error to prevent that scenario, but that breaks randconfigs. So change the error to a warning which also disables CONFIG_CC_OPTIMIZE_FOR_SIZE. Reported-by: Andi Kleen Signed-off-by: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Steven Rostedt Cc: Thomas Gleixner Cc: kbuild test robot Cc: kbuild-all@01.org Link: http://lkml.kernel.org/r/20170418214429.o7fbwbmf4nqosezy@treble Signed-off-by: Ingo Molnar

ftrace/x86: Fix triple fault with graph tracing and suspend-to-ram

2017-04-14T09:48:51+00:00

On x86-32, with CONFIG_FIRMWARE and multiple CPUs, if you enable function graph tracing and then suspend to RAM, it will triple fault and reboot when it resumes. The first fault happens when booting a secondary CPU: startup_32_smp() load_ucode_ap() prepare_ftrace_return() ftrace_graph_is_dead() (accesses 'kill_ftrace_graph') The early head_32.S code calls into load_ucode_ap(), which has an an ftrace hook, so it calls prepare_ftrace_return(), which calls ftrace_graph_is_dead(), which tries to access the global 'kill_ftrace_graph' variable with a virtual address, causing a fault because the CPU is still in real mode. The fix is to add a check in prepare_ftrace_return() to make sure it's running in protected mode before continuing. The check makes sure the stack pointer is a virtual kernel address. It's a bit of a hack, but it's not very intrusive and it works well enough. For reference, here are a few other (more difficult) ways this could have potentially been fixed: - Move startup_32_smp()'s call to load_ucode_ap() down to *after* paging is enabled. (No idea what that would break.) - Track down load_ucode_ap()'s entire callee tree and mark all the functions 'notrace'. (Probably not realistic.) - Pause graph tracing in ftrace_suspend_notifier_call() or bringup_cpu() or __cpu_up(), and ensure that the pause facility can be queried from real mode. Reported-by: Paul Menzel Signed-off-by: Josh Poimboeuf Tested-by: Paul Menzel Reviewed-by: Steven Rostedt (VMware) Cc: "Rafael J . Wysocki" Cc: linux-acpi@vger.kernel.org Cc: Borislav Petkov Cc: stable@kernel.org Cc: Len Brown Link: http://lkml.kernel.org/r/5c1272269a580660703ed2eccf44308e790c7a98.1492123841.git.jpoimboe@redhat.com Signed-off-by: Thomas Gleixner

x86/build: Mostly disable '-maccumulate-outgoing-args'

2017-03-30T09:53:04+00:00

The GCC '-maccumulate-outgoing-args' flag is enabled for most configs, mostly because of issues which are no longer relevant. For most configs, and with most recent versions of GCC, it's no longer needed. Clarify which cases need it, and only enable it for those cases. Also produce a compile-time error for the ftrace graph + mcount + '-Os' case, which will otherwise cause runtime failures. The main benefit of '-maccumulate-outgoing-args' is that it prevents an ugly prologue for functions which have aligned stacks. But removing the option also has some benefits: more readable argument saves, smaller text size, and (presumably) slightly improved performance. Here are the object size savings for 32-bit and 64-bit defconfig kernels: text data bss dec hex filename 10006710 3543328 1773568 15323606 e9d1d6 vmlinux.x86-32.before 9706358 3547424 1773568 15027350 e54c96 vmlinux.x86-32.after text data bss dec hex filename 10652105 4537576 843776 16033457 f4a6b1 vmlinux.x86-64.before 10639629 4537576 843776 16020981 f475f5 vmlinux.x86-64.after That comes out to a 3% text size improvement on x86-32 and a 0.1% text size improvement on x86-64. Signed-off-by: Josh Poimboeuf Cc: Andrew Lutomirski Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: Linus Torvalds Cc: Pavel Machek Cc: Peter Zijlstra Cc: Steven Rostedt Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20170316193133.zrj6gug53766m6nn@treble Signed-off-by: Ingo Molnar

ftrace/x86: Do no run CPU sync when there is only one CPU online

2017-03-28T16:35:16+00:00

Moving enabling of function tracing to early boot, even before scheduling is enabled, means that it is not safe to enable interrupts. When function tracing was enabled at boot up, it use to happen after scheduling and the other CPUs were brought up. That required running a sync across all CPUs when modifying the function hook locations in the code. To do the synchronization, interrupts had to be enabled. Now function tracing can be started before the other CPUs are brought up, and enabling interrupts in that case is dangerous. As only tho boot CPU is active, there is no reason to run the synchronization. If the online CPU count is one, do not bother doing the synchronization. This removes the need to enable interrupts. Cc: Thomas Gleixner Cc: Ingo Molnar Cc: "H. Peter Anvin" Signed-off-by: Steven Rostedt (VMware)

scripts/spelling.txt: add "disble(d)" pattern and fix typo instances

2017-03-10T01:01:09+00:00

Fix typos and add the following to the scripts/spelling.txt: disble||disable disbled||disabled I kept the TSL2563_INT_DISBLED in /drivers/iio/light/tsl2563.c untouched. The macro is not referenced at all, but this commit is touching only comment blocks just in case. Link: http://lkml.kernel.org/r/1481573103-11329-20-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ftrace/x86: Implement HAVE_FUNCTION_GRAPH_RET_ADDR_PTR

2016-08-24T10:15:15+00:00

Use the more reliable version of ftrace_graph_ret_addr() so we no longer have to worry about the unwinder getting out of sync with the function graph ret_stack index, which can happen if the unwinder skips any frames before calling ftrace_graph_ret_addr(). This fixes this issue (and several others like it): $ cat /proc/self/stack [] save_stack_trace_tsk+0x22/0x40 [] proc_pid_stack+0xb9/0x110 [] proc_single_show+0x54/0x80 [] seq_read+0x108/0x3e0 [] __vfs_read+0x37/0x140 [] vfs_read+0x99/0x140 [] SyS_read+0x58/0xc0 [] entry_SYSCALL_64_fastpath+0x1f/0xbd [] 0xffffffffffffffff $ echo function_graph > /sys/kernel/debug/tracing/current_tracer $ cat /proc/self/stack [] return_to_handler+0x0/0x27 [] print_context_stack+0xfc/0x100 [] return_to_handler+0x0/0x27 [] dump_trace+0x12b/0x350 [] return_to_handler+0x0/0x27 [] save_stack_trace_tsk+0x22/0x40 [] return_to_handler+0x0/0x27 [] proc_pid_stack+0xb9/0x110 [] return_to_handler+0x0/0x27 [] proc_single_show+0x54/0x80 [] return_to_handler+0x0/0x27 [] seq_read+0x108/0x3e0 [] return_to_handler+0x0/0x27 [] __vfs_read+0x37/0x140 [] return_to_handler+0x0/0x27 [] vfs_read+0x99/0x140 [] 0xffffffffffffffff Enabling function graph tracing causes the stack trace to change in two ways: First, the real call addresses are confusingly interspersed with 'return_to_handler' addresses. This issue will be fixed by the next patch. Second, the stack trace is offset by two frames, because the unwinder skipped the first two frames and got out of sync with the ret_stack index. This patch fixes this issue. Signed-off-by: Josh Poimboeuf Acked-by: Steven Rostedt Cc: Andy Lutomirski Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Byungchul Park Cc: Denys Vlasenko Cc: Frederic Weisbecker Cc: H. Peter Anvin Cc: Kees Cook Cc: Linus Torvalds Cc: Nilay Vaish Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/a6d623e36f8d08f9a17bd74d804d201177a23afd.1471607358.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar