BMC/Intel-BMC/linux.git/arch/x86/kernel/cpu/bugs.c, branch dev-4.17

x86/l1tf: Fix build error seen if CONFIG_KVM_INTEL is disabled

2018-08-17T19:02:42+00:00

commit 1eb46908b35dfbac0ec1848d4b1e39667e0187e9 upstream. allmodconfig+CONFIG_INTEL_KVM=n results in the following build error. ERROR: "l1tf_vmx_mitigation" [arch/x86/kvm/kvm.ko] undefined! Fixes: 5b76a3cff011 ("KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry") Reported-by: Meelis Roos Cc: Meelis Roos Cc: Paolo Bonzini Cc: Thomas Gleixner Signed-off-by: Guenter Roeck Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

cpu/hotplug: Fix SMT supported evaluation

2018-08-15T16:11:07+00:00

commit bc2d8d262cba5736332cbc866acb11b1c5748aa9 upstream Josh reported that the late SMT evaluation in cpu_smt_state_init() sets cpu_smt_control to CPU_SMT_NOT_SUPPORTED in case that 'nosmt' was supplied on the kernel command line as it cannot differentiate between SMT disabled by BIOS and SMT soft disable via 'nosmt'. That wreckages the state and makes the sysfs interface unusable. Rework this so that during bringup of the non boot CPUs the availability of SMT is determined in cpu_smt_allowed(). If a newly booted CPU is not a 'primary' thread then set the local cpu_smt_available marker and evaluate this explicitely right after the initial SMP bringup has finished. SMT evaulation on x86 is a trainwreck as the firmware has all the information _before_ booting the kernel, but there is no interface to query it. Fixes: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS") Reported-by: Josh Poimboeuf Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

x86/speculation: Use ARCH_CAPABILITIES to skip L1D flush on vmentry

2018-08-15T16:11:07+00:00

commit 8e0b2b916662e09dd4d09e5271cdf214c6b80e62 upstream Bit 3 of ARCH_CAPABILITIES tells a hypervisor that L1D flush on vmentry is not needed. Add a new value to enum vmx_l1d_flush_state, which is used either if there is no L1TF bug at all, or if bit 3 is set in ARCH_CAPABILITIES. Signed-off-by: Paolo Bonzini Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

x86/speculation: Simplify sysfs report of VMX L1TF vulnerability

2018-08-15T16:11:07+00:00

commit ea156d192f5257a5bf393d33910d3b481bf8a401 upstream Three changes to the content of the sysfs file: - If EPT is disabled, L1TF cannot be exploited even across threads on the same core, and SMT is irrelevant. - If mitigation is completely disabled, and SMT is enabled, print "vulnerable" instead of "vulnerable, SMT vulnerable" - Reorder the two parts so that the main vulnerability state comes first and the detail on SMT is second. Signed-off-by: Paolo Bonzini Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

x86/bugs, kvm: Introduce boot-time control of L1TF mitigations

2018-08-15T16:11:05+00:00

commit d90a7a0ec83fb86622cd7dae23255d3c50a99ec8 upstream Introduce the 'l1tf=' kernel command line option to allow for boot-time switching of mitigation that is used on processors affected by L1TF. The possible values are: full Provides all available mitigations for the L1TF vulnerability. Disables SMT and enables all mitigations in the hypervisors. SMT control via /sys/devices/system/cpu/smt/control is still possible after boot. Hypervisors will issue a warning when the first VM is started in a potentially insecure configuration, i.e. SMT enabled or L1D flush disabled. full,force Same as 'full', but disables SMT control. Implies the 'nosmt=force' command line option. sysfs control of SMT and the hypervisor flush control is disabled. flush Leaves SMT enabled and enables the conditional hypervisor mitigation. Hypervisors will issue a warning when the first VM is started in a potentially insecure configuration, i.e. SMT enabled or L1D flush disabled. flush,nosmt Disables SMT and enables the conditional hypervisor mitigation. SMT control via /sys/devices/system/cpu/smt/control is still possible after boot. If SMT is reenabled or flushing disabled at runtime hypervisors will issue a warning. flush,nowarn Same as 'flush', but hypervisors will not warn when a VM is started in a potentially insecure configuration. off Disables hypervisor mitigations and doesn't emit any warnings. Default is 'flush'. Let KVM adhere to these semantics, which means: - 'lt1f=full,force' : Performe L1D flushes. No runtime control possible. - 'l1tf=full' - 'l1tf-flush' - 'l1tf=flush,nosmt' : Perform L1D flushes and warn on VM start if SMT has been runtime enabled or L1D flushing has been run-time enabled - 'l1tf=flush,nowarn' : Perform L1D flushes and no warnings are emitted. - 'l1tf=off' : L1D flushes are not performed and no warnings are emitted. KVM can always override the L1D flushing behavior using its 'vmentry_l1d_flush' module parameter except when lt1f=full,force is set. This makes KVM's private 'nosmt' option redundant, and as it is a bit non-systematic anyway (this is something to control globally, not on hypervisor level), remove that option. Add the missing Documentation entry for the l1tf vulnerability sysfs file while at it. Signed-off-by: Jiri Kosina Signed-off-by: Thomas Gleixner Tested-by: Jiri Kosina Reviewed-by: Greg Kroah-Hartman Reviewed-by: Josh Poimboeuf Link: https://lkml.kernel.org/r/20180713142323.202758176@linutronix.de Signed-off-by: Greg Kroah-Hartman

cpu/hotplug: Set CPU_SMT_NOT_SUPPORTED early

2018-08-15T16:11:05+00:00

commit fee0aede6f4739c87179eca76136f83210953b86 upstream The CPU_SMT_NOT_SUPPORTED state is set (if the processor does not support SMT) when the sysfs SMT control file is initialized. That was fine so far as this was only required to make the output of the control file correct and to prevent writes in that case. With the upcoming l1tf command line parameter, this needs to be set up before the L1TF mitigation selection and command line parsing happens. Signed-off-by: Thomas Gleixner Tested-by: Jiri Kosina Reviewed-by: Greg Kroah-Hartman Reviewed-by: Josh Poimboeuf Link: https://lkml.kernel.org/r/20180713142323.121795971@linutronix.de Signed-off-by: Greg Kroah-Hartman

x86/kvm: Allow runtime control of L1D flush

2018-08-15T16:11:05+00:00

commit 895ae47f9918833c3a880fbccd41e0692b37e7d9 upstream All mitigation modes can be switched at run time with a static key now: - Use sysfs_streq() instead of strcmp() to handle the trailing new line from sysfs writes correctly. - Make the static key management handle multiple invocations properly. - Set the module parameter file to RW Signed-off-by: Thomas Gleixner Tested-by: Jiri Kosina Reviewed-by: Greg Kroah-Hartman Reviewed-by: Josh Poimboeuf Link: https://lkml.kernel.org/r/20180713142322.954525119@linutronix.de Signed-off-by: Greg Kroah-Hartman

x86/l1tf: Handle EPT disabled state proper

2018-08-15T16:11:04+00:00

commit a7b9020b06ec6d7c3f3b0d4ef1a9eba12654f4f7 upstream If Extended Page Tables (EPT) are disabled or not supported, no L1D flushing is required. The setup function can just avoid setting up the L1D flush for the EPT=n case. Invoke it after the hardware setup has be done and enable_ept has the correct state and expose the EPT disabled state in the mitigation status as well. Signed-off-by: Thomas Gleixner Tested-by: Jiri Kosina Reviewed-by: Greg Kroah-Hartman Reviewed-by: Josh Poimboeuf Link: https://lkml.kernel.org/r/20180713142322.612160168@linutronix.de Signed-off-by: Greg Kroah-Hartman

x86/litf: Introduce vmx status variable

2018-08-15T16:11:04+00:00

commit 72c6d2db64fa18c996ece8f06e499509e6c9a37e upstream Store the effective mitigation of VMX in a status variable and use it to report the VMX state in the l1tf sysfs file. Signed-off-by: Thomas Gleixner Tested-by: Jiri Kosina Reviewed-by: Greg Kroah-Hartman Reviewed-by: Josh Poimboeuf Link: https://lkml.kernel.org/r/20180713142322.433098358@linutronix.de Signed-off-by: Greg Kroah-Hartman

x86/bugs: Move the l1tf function and define pr_fmt properly

2018-08-15T16:11:00+00:00

commit 56563f53d3066afa9e63d6c997bf67e76a8b05c0 upstream The pr_warn in l1tf_select_mitigation would have used the prior pr_fmt which was defined as "Spectre V2 : ". Move the function to be past SSBD and also define the pr_fmt. Fixes: 17dbca119312 ("x86/speculation/l1tf: Add sysfs reporting for l1tf") Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman