BMC/Intel-BMC/linux.git/arch/x86/kernel/apic, branch dev-5.2

Revert "x86/apic: Include the LDR when clearing out APIC registers"

2019-09-10T09:35:26+00:00

[ Upstream commit 950b07c14e8c59444e2359f15fd70ed5112e11a0 ] This reverts commit 558682b5291937a70748d36fd9ba757fb25b99ae. Chris Wilson reports that it breaks his CPU hotplug test scripts. In particular, it breaks offlining and then re-onlining the boot CPU, which we treat specially (and the BIOS does too). The symptoms are that we can offline the CPU, but it then does not come back online again: smpboot: CPU 0 is now offline smpboot: Booting Node 0 Processor 0 APIC 0x0 smpboot: do_boot_cpu failed(-1) to wakeup CPU#0 Thomas says he knows why it's broken (my personal suspicion: our magic handling of the "cpu0_logical_apicid" thing), but for 5.3 the right fix is to just revert it, since we've never touched the LDR bits before, and it's not worth the risk to do anything else at this stage. [ Hotpluging of the boot CPU is special anyway, and should be off by default. See the "BOOTPARAM_HOTPLUG_CPU0" config option and the cpu0_hotplug kernel parameter. In general you should not do it, and it has various known limitations (hibernate and suspend require the boot CPU, for example). But it should work, even if the boot CPU is special and needs careful treatment - Linus ] Link: https://lore.kernel.org/lkml/156785100521.13300.14461504732265570003@skylake-alporthouse-com/ Reported-by: Chris Wilson Acked-by: Thomas Gleixner Cc: Bandan Das Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

x86/apic: Include the LDR when clearing out APIC registers

2019-09-06T08:23:37+00:00

commit 558682b5291937a70748d36fd9ba757fb25b99ae upstream. Although APIC initialization will typically clear out the LDR before setting it, the APIC cleanup code should reset the LDR. This was discovered with a 32-bit KVM guest jumping into a kdump kernel. The stale bits in the LDR triggered a bug in the KVM APIC implementation which caused the destination mapping for VCPUs to be corrupted. Note that this isn't intended to paper over the KVM APIC bug. The kernel has to clear the LDR when resetting the APIC registers except when X2APIC is enabled. This lacks a Fixes tag because missing to clear LDR goes way back into pre git history. [ tglx: Made x2apic_enabled a function call as required ] Signed-off-by: Bandan Das Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190826101513.5080-3-bsd@redhat.com Signed-off-by: Greg Kroah-Hartman

x86/apic: Do not initialize LDR and DFR for bigsmp

2019-09-06T08:23:37+00:00

commit bae3a8d3308ee69a7dbdf145911b18dfda8ade0d upstream. Legacy apic init uses bigsmp for smp systems with 8 and more CPUs. The bigsmp APIC implementation uses physical destination mode, but it nevertheless initializes LDR and DFR. The LDR even ends up incorrectly with multiple bit being set. This does not cause a functional problem because LDR and DFR are ignored when physical destination mode is active, but it triggered a problem on a 32-bit KVM guest which jumps into a kdump kernel. The multiple bits set unearthed a bug in the KVM APIC implementation. The code which creates the logical destination map for VCPUs ignores the disabled state of the APIC and ends up overwriting an existing valid entry and as a result, APIC calibration hangs in the guest during kdump initialization. Remove the bogus LDR/DFR initialization. This is not intended to work around the KVM APIC bug. The LDR/DFR ininitalization is wrong on its own. The issue goes back into the pre git history. The fixes tag is the commit in the bitkeeper import which introduced bigsmp support in 2003. git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Fixes: db7b9e9f26b8 ("[PATCH] Clustered APIC setup for >8 CPU systems") Suggested-by: Thomas Gleixner Signed-off-by: Bandan Das Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190826101513.5080-2-bsd@redhat.com Signed-off-by: Greg Kroah-Hartman

x86/apic: Handle missing global clockevent gracefully

2019-08-29T06:30:23+00:00

commit f897e60a12f0b9146357780d317879bce2a877dc upstream. Some newer machines do not advertise legacy timers. The kernel can handle that situation if the TSC and the CPU frequency are enumerated by CPUID or MSRs and the CPU supports TSC deadline timer. If the CPU does not support TSC deadline timer the local APIC timer frequency has to be known as well. Some Ryzens machines do not advertize legacy timers, but there is no reliable way to determine the bus frequency which feeds the local APIC timer when the machine allows overclocking of that frequency. As there is no legacy timer the local APIC timer calibration crashes due to a NULL pointer dereference when accessing the not installed global clock event device. Switch the calibration loop to a non interrupt based one, which polls either TSC (if frequency is known) or jiffies. The latter requires a global clockevent. As the machines which do not have a global clockevent installed have a known TSC frequency this is a non issue. For older machines where TSC frequency is not known, there is no known case where the legacy timers do not exist as that would have been reported long ago. Reported-by: Daniel Drake Reported-by: Jiri Slaby Signed-off-by: Thomas Gleixner Tested-by: Daniel Drake Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1908091443030.21433@nanos.tec.linutronix.de Link: http://bugzilla.opensuse.org/show_bug.cgi?id=1142926#c12 Signed-off-by: Greg Kroah-Hartman

x86/apic: Silence -Wtype-limits compiler warnings

2019-08-06T17:08:11+00:00

[ Upstream commit ec6335586953b0df32f83ef696002063090c7aef ] There are many compiler warnings like this, In file included from ./arch/x86/include/asm/smp.h:13, from ./arch/x86/include/asm/mmzone_64.h:11, from ./arch/x86/include/asm/mmzone.h:5, from ./include/linux/mmzone.h:969, from ./include/linux/gfp.h:6, from ./include/linux/mm.h:10, from arch/x86/kernel/apic/io_apic.c:34: arch/x86/kernel/apic/io_apic.c: In function 'check_timer': ./arch/x86/include/asm/apic.h:37:11: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] if ((v) <= apic_verbosity) \ ^~ arch/x86/kernel/apic/io_apic.c:2160:2: note: in expansion of macro 'apic_printk' apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X " ^~~~~~~~~~~ ./arch/x86/include/asm/apic.h:37:11: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] if ((v) <= apic_verbosity) \ ^~ arch/x86/kernel/apic/io_apic.c:2207:4: note: in expansion of macro 'apic_printk' apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: " ^~~~~~~~~~~ APIC_QUIET is 0, so silence them by making apic_verbosity type int. Signed-off-by: Qian Cai Signed-off-by: Thomas Gleixner Link: https://lkml.kernel.org/r/1562621805-24789-1-git-send-email-cai@lca.pw Signed-off-by: Sasha Levin

x86/irq: Seperate unused system vectors from spurious entry again

2019-07-21T07:00:41+00:00

commit f8a8fe61fec8006575699559ead88b0b833d5cad upstream. Quite some time ago the interrupt entry stubs for unused vectors in the system vector range got removed and directly mapped to the spurious interrupt vector entry point. Sounds reasonable, but it's subtly broken. The spurious interrupt vector entry point pushes vector number 0xFF on the stack which makes the whole logic in __smp_spurious_interrupt() pointless. As a consequence any spurious interrupt which comes from a vector != 0xFF is treated as a real spurious interrupt (vector 0xFF) and not acknowledged. That subsequently stalls all interrupt vectors of equal and lower priority, which brings the system to a grinding halt. This can happen because even on 64-bit the system vector space is not guaranteed to be fully populated. A full compile time handling of the unused vectors is not possible because quite some of them are conditonally populated at runtime. Bring the entry stubs back, which wastes 160 bytes if all stubs are unused, but gains the proper handling back. There is no point to selectively spare some of the stubs which are known at compile time as the required code in the IDT management would be way larger and convoluted. Do not route the spurious entries through common_interrupt and do_IRQ() as the original code did. Route it to smp_spurious_interrupt() which evaluates the vector number and acts accordingly now that the real vector numbers are handed in. Fixup the pr_warn so the actual spurious vector (0xff) is clearly distiguished from the other vectors and also note for the vectored case whether it was pending in the ISR or not. "Spurious APIC interrupt (vector 0xFF) on CPU#0, should never happen." "Spurious interrupt vector 0xed on CPU#1. Acked." "Spurious interrupt vector 0xee on CPU#1. Not pending!." Fixes: 2414e021ac8d ("x86: Avoid building unused IRQ entry stubs") Reported-by: Jan Kiszka Signed-off-by: Thomas Gleixner Cc: Marc Zyngier Cc: Jan Beulich Link: https://lkml.kernel.org/r/20190628111440.550568228@linutronix.de Signed-off-by: Greg Kroah-Hartman

x86/irq: Handle spurious interrupt after shutdown gracefully

2019-07-21T07:00:40+00:00

commit b7107a67f0d125459fe41f86e8079afd1a5e0b15 upstream. Since the rework of the vector management, warnings about spurious interrupts have been reported. Robert provided some more information and did an initial analysis. The following situation leads to these warnings: CPU 0 CPU 1 IO_APIC interrupt is raised sent to CPU1 Unable to handle immediately (interrupts off, deep idle delay) mask() ... free() shutdown() synchronize_irq() clear_vector() do_IRQ() -> vector is clear Before the rework the vector entries of legacy interrupts were statically assigned and occupied precious vector space while most of them were unused. Due to that the above situation was handled silently because the vector was handled and the core handler of the assigned interrupt descriptor noticed that it is shut down and returned. While this has been usually observed with legacy interrupts, this situation is not limited to them. Any other interrupt source, e.g. MSI, can cause the same issue. After adding proper synchronization for level triggered interrupts, this can only happen for edge triggered interrupts where the IO-APIC obviously cannot provide information about interrupts in flight. While the spurious warning is actually harmless in this case it worries users and driver developers. Handle it gracefully by marking the vector entry as VECTOR_SHUTDOWN instead of VECTOR_UNUSED when the vector is freed up. If that above late handling happens the spurious detector will not complain and switch the entry to VECTOR_UNUSED. Any subsequent spurious interrupt on that line will trigger the spurious warning as before. Fixes: 464d12309e1b ("x86/vector: Switch IOAPIC to global reservation mode") Reported-by: Robert Hodaszi Signed-off-by: Thomas Gleixner - Tested-by: Robert Hodaszi Cc: Marc Zyngier Link: https://lkml.kernel.org/r/20190628111440.459647741@linutronix.de Signed-off-by: Greg Kroah-Hartman

x86/ioapic: Implement irq_get_irqchip_state() callback

2019-07-21T07:00:40+00:00

commit dfe0cf8b51b07e56ded571e3de0a4a9382517231 upstream. When an interrupt is shut down in free_irq() there might be an inflight interrupt pending in the IO-APIC remote IRR which is not yet serviced. That means the interrupt has been sent to the target CPUs local APIC, but the target CPU is in a state which delays the servicing. So free_irq() would proceed to free resources and to clear the vector because synchronize_hardirq() does not see an interrupt handler in progress. That can trigger a spurious interrupt warning, which is harmless and just confuses users, but it also can leave the remote IRR in a stale state because once the handler is invoked the interrupt resources might be freed already and therefore acknowledgement is not possible anymore. Implement the irq_get_irqchip_state() callback for the IO-APIC irq chip. The callback is invoked from free_irq() via __synchronize_hardirq(). Check the remote IRR bit of the interrupt and return 'in flight' if it is set and the interrupt is configured in level mode. For edge mode the remote IRR has no meaning. As this is only meaningful for level triggered interrupts this won't cure the potential spurious interrupt warning for edge triggered interrupts, but the edge trigger case does not result in stale hardware state. This has to be addressed at the vector/interrupt entry level seperately. Fixes: 464d12309e1b ("x86/vector: Switch IOAPIC to global reservation mode") Reported-by: Robert Hodaszi Signed-off-by: Thomas Gleixner Cc: Marc Zyngier Link: https://lkml.kernel.org/r/20190628111440.370295517@linutronix.de Signed-off-by: Greg Kroah-Hartman

Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2019-06-29T11:42:30+00:00

Pull x86 fixes from Ingo Molnar: "Misc fixes all over the place: - might_sleep() atomicity fix in the microcode loader - resctrl boundary condition fix - APIC arithmethics bug fix for frequencies >= 4.2 GHz - three 5-level paging crash fixes - two speculation fixes - a perf/stacktrace fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/unwind/orc: Fall back to using frame pointers for generated code perf/x86: Always store regs->ip in perf_callchain_kernel() x86/speculation: Allow guests to use SSBD even if host does not x86/mm: Handle physical-virtual alignment mismatch in phys_p4d_init() x86/boot/64: Add missing fixup_pointer() for next_early_pgt access x86/boot/64: Fix crash if kernel image crosses page table boundary x86/apic: Fix integer overflow on 10 bit left shift of cpu_khz x86/resctrl: Prevent possible overrun during bitmap operations x86/microcode: Fix the microcode load on CPU hotplug for real

x86/apic: Fix integer overflow on 10 bit left shift of cpu_khz

2019-06-22T09:59:31+00:00

The left shift of unsigned int cpu_khz will overflow for large values of cpu_khz, so cast it to a long long before shifting it to avoid overvlow. For example, this can happen when cpu_khz is 4194305, i.e. ~4.2 GHz. Addresses-Coverity: ("Unintentional integer overflow") Fixes: 8c3ba8d04924 ("x86, apic: ack all pending irqs when crashed/on kexec") Signed-off-by: Colin Ian King Signed-off-by: Thomas Gleixner Cc: Borislav Petkov Cc: "H . Peter Anvin" Cc: kernel-janitors@vger.kernel.org Link: https://lkml.kernel.org/r/20190619181446.13635-1-colin.king@canonical.com