BMC/Intel-BMC/linux.git/arch/sh/boards, branch dev-4.6

sh: add SMP method selection to device tree pseudo-board

2016-03-17T19:46:12+00:00

Allow selection of plat_smp_ops based on the enable-method cpu property from device tree and provide dummy ops for booting with a device tree that does not enable SMP. Signed-off-by: Rich Felker

sh: add device tree support and generic board using device tree

2016-03-17T19:46:11+00:00

Add a new pseudo-board, within the existing SH boards/machine-vectors framework, which does not represent any actual hardware but instead requires all hardware to be described by the device tree blob provided by the boot loader. Changes made are thus non-invasive and do not risk breaking support for legacy boards. New hardware, including the open-hardware J2 and associated SoC devices, will use device free from the outset. Legacy SH boards can transition to device tree once all their hardware has device tree bindings, driver support for device tree, and a dts file for the board. It is intented that, once all boards are supported in the new framework, the existing machine-vectors framework should be removed and the new device tree setup code integrated directly. Signed-off-by: Rich Felker

Merge tag 'for-linus-20160112' of git://git.infradead.org/linux-mtd

2016-01-13T19:25:54+00:00

Pull MTD updates from Brian Norris: "Generic MTD: - populate the MTD device 'of_node' field (and get a proper 'of_node' symlink in sysfs) This yielded some new helper functions, and changes across a variety of drivers - partitioning cleanups, to prepare for better device-tree based partitioning in the future Eliminate a lot of boilerplate for drivers that want to use OF-based partition parsing The DT bindings for this didn't settle yet, so most non-cleanup portions are deferred for a future release NAND: - embed a struct mtd_info inside struct nand_chip This is really long overdue; too many drivers have to do the same silly boilerplate to allocate and link up two "independent" structs, when in fact, everyone is assuming there is an exact 1:1 relationship between a NAND chips struct and its underlying MTD. This aids improved helpers and should make certain abstractions easier in the future. Also causes a lot of churn, helped along by some automated code transformations - add more core support for detecting (and "correcting") bitflips in erased pages; requires opt-in by drivers, but at least we kill a few bad implementations and hopefully stave off future ones - pxa3xx_nand: cleanups, a few fixes, and PM improvements - new JZ4780 NAND driver SPI NOR: - provide default erase function, for controllers that just want to send the SECTOR_ERASE command directly - fix some module auto-loading issues with device tree ("jedec,spi-nor") - error handling fixes - new Mediatek QSPI flash driver Other: - cfi: force valid geometry Kconfig (finally!) This one used to trip up randconfigs occasionally, since bots aren't deterred by big scary "advanced configuration" menus More? Probably. See the commit logs" * tag 'for-linus-20160112' of git://git.infradead.org/linux-mtd: (168 commits) mtd: jz4780_nand: replace if/else blocks with switch/case mtd: nand: jz4780: Update ecc correction error codes mtd: nandsim: use nand_get_controller_data() mtd: jz4780_nand: remove useless mtd->priv = chip assignment staging: mt29f_spinand: make use of nand_set/get_controller_data() helpers mtd: nand: make use of nand_set/get_controller_data() helpers ARM: make use of nand_set/get_controller_data() helpers mtd: nand: add helpers to access ->priv mtd: nand: jz4780: driver for NAND devices on JZ4780 SoCs mtd: nand: jz4740: remove custom 'erased check' implementation mtd: nand: diskonchip: remove custom 'erased check' implementation mtd: nand: davinci: remove custom 'erased check' implementation mtd: nand: use nand_check_erased_ecc_chunk in default ECC read functions mtd: nand: return consistent error codes in ecc.correct() implementations doc: dt: mtd: new binding for jz4780-{nand,bch} mtd: cfi_cmdset_0001: fixing memory leak and handling failed kmalloc mtd: spi-nor: wait until lock/unlock operations are ready mtd: tests: consolidate kmalloc/memset 0 call to kzalloc jffs2: use to_delayed_work mtd: nand: assign reasonable default name for NAND drivers ...

sh: nand: make use of mtd_to_nand() where appropriate

2015-12-08T18:46:13+00:00

mtd_to_nand() was recently introduced to avoid direct accesses to the mtd->priv field. Update all SH specific implementations to use this helper. Signed-off-by: Boris Brezillon Signed-off-by: Brian Norris

[media] include/media: move platform_data to linux/platform_data/media

2015-11-17T08:58:42+00:00

Let's not mix platform_data headers with the core headers. Instead, let's create a subdir at linux/platform_data and move the headers to that common place, adding it to MAINTAINERS. The headers were moved with: mkdir include/linux/platform_data/media/; git mv include/media/gpio-ir-recv.h include/media/ir-rx51.h include/media/mmp-camera.h include/media/omap1_camera.h include/media/omap4iss.h include/media/s5p_hdmi.h include/media/si4713.h include/media/sii9234.h include/media/smiapp.h include/media/soc_camera.h include/media/soc_camera_platform.h include/media/timb_radio.h include/media/timb_video.h include/linux/platform_data/media/ And the references fixed with this script: MAIN_DIR="linux/platform_data/" PREV_DIR="media/" DIRS="media/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Signed-off-by: Mauro Carvalho Chehab Acked-by: Arnd Bergmann Acked-by: Lee Jones Acked-by: Krzysztof Kozlowski

[media] include/media: move driver interface headers to a separate dir

2015-11-17T08:57:29+00:00

Let's not mix headers used by the core with those headers that are needed by some driver-specific interface header. The headers used on drivers were manually moved using: mkdir include/media/drv-intf/ git mv include/media/cx2341x.h include/media/cx25840.h \ include/media/exynos-fimc.h include/media/msp3400.h \ include/media/s3c_camif.h include/media/saa7146.h \ include/media/saa7146_vv.h include/media/sh_mobile_ceu.h \ include/media/sh_mobile_csi2.h include/media/sh_vou.h \ include/media/si476x.h include/media/soc_mediabus.h \ include/media/tea575x.h include/media/drv-intf/ And the references for those headers were corrected using: MAIN_DIR="media/" PREV_DIR="media/" DIRS="drv-intf/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Signed-off-by: Mauro Carvalho Chehab Acked-by: Arnd Bergmann

[media] include/media: split I2C headers from V4L2 core

2015-11-17T08:57:11+00:00

Currently, include/media is messy, as it contains both the V4L2 core headers and some driver-specific headers on the same place. That makes harder to identify what core headers should be documented and what headers belong to I2C drivers that are included only by bridge/main drivers that would require the functions provided by them. Let's move those i2c specific files to its own subdirectory. The files to move were produced via the following script: mkdir include/media/i2c (cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done) (cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/*/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done) for i in include/media/*.h; do n=`basename $i`; (for j in $(git grep -l $n); do dirname $j; done)|sort|uniq|grep -ve '^.$' > list; num=$(wc -l list|cut -d' ' -f1); if [ $num == 1 ]; then if [ "`grep i2c list`" != "" ]; then git mv $i include/media/i2c; fi; fi; done And the references corrected via this script: MAIN_DIR="media/" PREV_DIR="media/" DIRS="i2c/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Merged Sakari Ailus patch that moves smiapp.h to include/media/i2c. Signed-off-by: Mauro Carvalho Chehab Acked-by: Arnd Bergmann

Merge tag 'for-linus-20151106' of git://git.infradead.org/linux-mtd

2015-11-06T19:50:24+00:00

Pull MTD updates from Brian Norris: "Core: - WARN (in some cases) when a struct mtd_info is registered multiple times; in the past this was "supported", but it's still error prone for future development. There's only one ugly case of this left in the tree (that we're aware of) and the owners are aware of the problems there. - fix potential deadlock in the blkdev removal path NOTE: the (potential) deadlock was introduced in a for-stable patch. This one is also marked for -stable. - ioctl(BLKPG) compat_ioctl support; resolves issues with 32-bit user space vs 64-bit kernel space - Set MTD parent device correctly throughout the tree, so the tree structure appears correctly in sysfs; many drivers were missing this (soft) requirement - Move device tree partitions (ofpart) into a dedicated 'partitions' subnode; this helps to disambiguate whether a node is a partition or some other auxiliary data - Improve error handling for partitioning failures NAND: - General: Increase timeout period, for corner-case systems with less-than-accurate jiffies - Fix OF-based autoloading of several NAND drivers when built as modules - pxa3xx_nand: - Rework timing configuration to be more dynamic - Refactor PM support - brcmnand: prepare for NorthStar 2 support (ARM64, 16-bit NAND chips) - sunxi_nand: refactoring and a few bug fixes - vf610: new NAND driver - FSMC: add SW BCH support; support common NAND DT bindings - lpc32xx_slc: refactor and improve timing calculations logic - denali: support for rev 5.1 SPI NOR: - Layering improvements - Added Winbond lock/unlock support - Added mtd_is_locked() (i.e., ioctl(MEMISLOCKED)) support - Increase full-chip-erase timeout linearly with flash size - fsl-quadspi: fix compile for non-ARM architectures - New flash support" * tag 'for-linus-20151106' of git://git.infradead.org/linux-mtd: (169 commits) mtd: don't WARN about overloaded users of mtd->reboot_notifier.notifier_call mtd: nand: sunxi: avoid retrieving data before ECC pass mtd: nand: sunxi: fix sunxi_nfc_hw_ecc_read/write_chunk() mtd: blkdevs: fix potential deadlock + lockdep warnings mtd: ofpart: move ofpart partitions to a dedicated dt node doc: dt: mtd: support partitions in a special 'partitions' subnode mtd: brcmnand: Force 8bit mode before doing nand_scan_ident() mtd: brcmnand: factor out CFG and CFG_EXT bitfields mtd: mtdpart: Do not fail mtd probe when parsing partitions fails mtd: fsl-quadspi: fix macro collision problems with READ/WRITE mtd: warn when registering the same master many times mtd: fixup corner case error handling in mtd_device_parse_register() mtd: tests: Replace timeval with ktime_t mtd: fsmc_nand: Add BCH4 SW ECC support for SPEAr600 mtd: nand: vf610_nfc: use nand_check_erased_ecc_chunk() helper mtd: nand: increase ready wait timeout and report timeouts mtd: docg3: off by one in doc_register_sysfs() mtd: pxa3xx_nand: clean up the pxa3xx timings mtd: pxa3xx_nand: rework flash detection and timing setup mtd: pxa3xx_nand: add helpers to setup the timings ...

sh: mach-rsk: remove unnecessary MTD partition probe specification

2015-09-30T20:51:35+00:00

The cmdlinepart parser is already supported in the default probe. Signed-off-by: Brian Norris

genirq: Remove irq argument from irq flow handlers

2015-09-16T13:47:51+00:00

Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner Cc: Julia Lawall Cc: Jiang Liu