BMC/Intel-BMC/linux.git/arch/s390, branch dev-4.17

perf: fix invalid bit in diagnostic entry

2018-08-03T05:47:53+00:00

[ Upstream commit 3c0a83b14ea71fef5ccc93a3bd2de5f892be3194 ] The s390 CPU measurement facility sampling mode supports basic entries and diagnostic entries. Each entry has a valid bit to indicate the status of the entry as valid or invalid. This bit is bit 31 in the diagnostic entry, but the bit mask definition refers to bit 30. Fix this by making the reserved field one bit larger. Fixes: 7e75fc3ff4cf ("s390/cpum_sf: Add raw data sampling to support the diagnostic-sampling function") Signed-off-by: Thomas Richter Reviewed-by: Hendrik Brueckner Signed-off-by: Martin Schwidefsky Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

s390/cpum_sf: Add data entry sizes to sampling trailer entry

2018-08-03T05:47:53+00:00

[ Upstream commit 77715b7ddb446bd39a06f3376e85f4bb95b29bb8 ] The CPU Measurement sampling facility creates a trailer entry for each Sample-Data-Block of stored samples. The trailer entry contains the sizes (in bytes) of the stored sampling types: - basic-sampling data entry size - diagnostic-sampling data entry size Both sizes are 2 bytes long. This patch changes the trailer entry definition to reflect this. Fixes: fcc77f507333 ("s390/cpum_sf: Atomically reset trailer entry fields of sample-data-blocks") Signed-off-by: Thomas Richter Reviewed-by: Hendrik Brueckner Signed-off-by: Martin Schwidefsky Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

s390: Correct register corruption in critical section cleanup

2018-07-11T14:31:25+00:00

commit 891f6a726cacbb87e5b06076693ffab53bd378d7 upstream. In the critical section cleanup we must not mess with r1. For march=z9 or older, larl + ex (instead of exrl) are used with r1 as a temporary register. This can clobber r1 in several interrupt handlers. Fix this by using r11 as a temp register. r11 is being saved by all callers of cleanup_critical. Fixes: 6dd85fbb87 ("s390: move expoline assembler macros to a header") Cc: stable@vger.kernel.org #v4.16 Reported-by: Oliver Kurz Reported-by: Petr Tesařík Signed-off-by: Christian Borntraeger Reviewed-by: Hendrik Brueckner Signed-off-by: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2018-05-30T15:30:30+00:00

Pull s390 fixes from Martin Schwidefsky: - a missing -msoft-float for the compile of the kexec purgatory - a fix for the dasd driver to avoid the double use of a field in the 'struct request' [ That latter one is being discussed, and Christoph asked for something cleaner, but for now it's a fix ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/dasd: use blk_mq_rq_from_pdu for per request data s390/purgatory: Fix endless interrupt loop

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2018-05-26T17:46:57+00:00

Pull KVM fixes from Radim Krčmář: "PPC: - Close a hole which could possibly lead to the host timebase getting out of sync. - Three fixes relating to PTEs and TLB entries for radix guests. - Fix a bug which could lead to an interrupt never getting delivered to the guest, if it is pending for a guest vCPU when the vCPU gets offlined. s390: - Fix false negatives in VSIE validity check (Cc stable) x86: - Fix time drift of VMX preemption timer when a guest uses LAPIC timer in periodic mode (Cc stable) - Unconditionally expose CPUID.IA32_ARCH_CAPABILITIES to allow migration from hosts that don't need retpoline mitigation (Cc stable) - Fix guest crashes on reboot by properly coupling CR4.OSXSAVE and CPUID.OSXSAVE (Cc stable) - Report correct RIP after Hyper-V hypercall #UD (introduced in -rc6)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: fix #UD address of failed Hyper-V hypercalls kvm: x86: IA32_ARCH_CAPABILITIES is always supported KVM: x86: Update cpuid properly when CR4.OSXAVE or CR4.PKE is changed x86/kvm: fix LAPIC timer drift when guest uses periodic mode KVM: s390: vsie: fix < 8k check for the itdba KVM: PPC: Book 3S HV: Do ptesync in radix guest exit path KVM: PPC: Book3S HV: XIVE: Resend re-routed interrupts on CPU priority change KVM: PPC: Book3S HV: Make radix clear pte when unmapping KVM: PPC: Book3S HV: Make radix use correct tlbie sequence in kvmppc_radix_tlbie_page KVM: PPC: Book3S HV: Snapshot timebase offset on guest entry

s390/purgatory: Fix endless interrupt loop

2018-05-18T05:24:35+00:00

New compilers use the floating-point registers as spill registers when there is high register pressure. In the purgatory however, the afp control bit is not set. This leads to an exception whenever a floating-point instruction is used, which again causes an interrupt loop. Forbid the compiler to use floating-point instructions by adding -msoft-float to KBUILD_CFLAGS. Signed-off-by: Philipp Rudo Fixes: 840798a1f529 (s390/kexec_file: Add purgatory) Reviewed-by: Hendrik Brueckner Signed-off-by: Martin Schwidefsky

KVM: s390: vsie: fix < 8k check for the itdba

2018-05-17T10:28:45+00:00

By missing an "L", we might detect some addresses to be <8k, although they are not. e.g. for itdba = 100001fff !(gpa & ~0x1fffU) -> 1 !(gpa & ~0x1fffUL) -> 0 So we would report a SIE validity intercept although everything is fine. Fixes: 166ecb3 ("KVM: s390: vsie: support transactional execution") Reported-by: Dan Carpenter Reviewed-by: Christian Borntraeger Reviewed-by: Janosch Frank Reviewed-by: Cornelia Huck Signed-off-by: David Hildenbrand Signed-off-by: Janosch Frank Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Christian Borntraeger

s390/cpum_sf: ensure sample frequency of perf event attributes is non-zero

2018-05-08T13:56:36+00:00

Correct a trinity finding for the perf_event_open() system call with a perf event attribute structure that uses a frequency but has the sampling frequency set to zero. This causes a FP divide exception during the sample rate initialization for the hardware sampling facility. Fixes: 8c069ff4bd606 ("s390/perf: add support for the CPU-Measurement Sampling Facility") Cc: stable@vger.kernel.org # 3.14+ Reviewed-by: Heiko Carstens Signed-off-by: Hendrik Brueckner Signed-off-by: Martin Schwidefsky

s390: use expoline thunks in the BPF JIT

2018-05-07T19:12:43+00:00

The BPF JIT need safe guarding against spectre v2 in the sk_load_xxx assembler stubs and the indirect branches generated by the JIT itself need to be converted to expolines. Signed-off-by: Martin Schwidefsky

s390: extend expoline to BC instructions

2018-05-07T19:12:42+00:00

The BPF JIT uses a 'b (%r)' instruction in the definition of the sk_load_word and sk_load_half functions. Add support for branch-on-condition instructions contained in the thunk code of an expoline. Signed-off-by: Martin Schwidefsky