BMC/Intel-BMC/linux.git/arch/s390/kvm/Makefile, branch dev

KVM: s390: hardware support for guest debugging

2014-04-22T11:24:51+00:00

This patch adds support to debug the guest using the PER facility on s390. Single-stepping, hardware breakpoints and hardware watchpoints are supported. In order to use the PER facility of the guest without it noticing it, the control registers of the guest have to be patched and access to them has to be intercepted(stctl, stctg, lctl, lctlg). All PER program interrupts have to be intercepted and only the relevant PER interrupts for the guest have to be given back. Special care has to be taken about repeated exits on the same hardware breakpoint. The intervention of the host in the guests PER configuration is not fully transparent. PER instruction nullification can not be used by the guest and too many storage alteration events may be reported to the guest (if it is activated for special address ranges only) when the host concurrently debugging it. Signed-off-by: David Hildenbrand Signed-off-by: Christian Borntraeger

KVM: s390: add architecture compliant guest access functions

2014-04-22T11:24:38+00:00

The new guest memory access function write_guest() and read_guest() can be used to access guest memory in an architecture compliant way. These functions will look at the vcpu's PSW and select the correct address space for memory access and also perform correct address wrap around. In case DAT is turned on, page tables will be walked otherwise access will happen to real or absolute memory. Any access exception will be recognized and exception data will be stored in the vcpu's kvm_vcpu_arch.pgm member. Subsequently an exception can be injected if necessary. Missing are: - key protection checks - access register mode support - program event recording support This patch also adds write_guest_real(), read_guest_real(), write_guest_absolute() and read_guest_absolute() guest functions which can be used to access real and absolute storage. These functions currently do not perform any access checks, since there is no use case (yet?). Signed-off-by: Heiko Carstens Reviewed-by: Thomas Huth Signed-off-by: Christian Borntraeger

KVM: s390: irq routing for adapter interrupts.

2014-03-21T12:43:00+00:00

Introduce a new interrupt class for s390 adapter interrupts and enable irqfds for s390. This is depending on a new s390 specific vm capability, KVM_CAP_S390_IRQCHIP, that needs to be enabled by userspace. Acked-by: Christian Borntraeger Signed-off-by: Cornelia Huck

KVM: async_pf: Async page fault support on s390

2014-01-30T12:11:02+00:00

This patch enables async page faults for s390 kvm guests. It provides the userspace API to enable and disable_wait this feature. The disable_wait will enforce that the feature is off by waiting on it. Also it includes the diagnose code, called by the guest to enable async page faults. The async page faults will use an already existing guest interface for this purpose, as described in "CP Programming Services (SC24-6084)". Signed-off-by: Dominik Dingel Signed-off-by: Christian Borntraeger

KVM: get rid of $(addprefix ../../../virt/kvm/, ...) in Makefiles

2013-05-19T12:14:00+00:00

As requested by the KVM maintainers, remove the addprefix used to refer to the main KVM code from the arch code, and replace it with a KVM variable that does the same thing. Tested-by: Christian Borntraeger Cc: Paolo Bonzini Cc: Gleb Natapov Cc: Christoffer Dall Acked-by: Xiantao Zhang Cc: Tony Luck Cc: Fenghua Yu Cc: Alexander Graf Cc: Benjamin Herrenschmidt Cc: Christian Borntraeger Cc: Cornelia Huck Signed-off-by: Marc Zyngier Signed-off-by: Gleb Natapov

KVM: s390: Wire up ioeventfd.

2013-03-05T22:12:17+00:00

Enable ioeventfd support on s390 and hook up diagnose 500 virtio-ccw notifications. Signed-off-by: Cornelia Huck Signed-off-by: Marcelo Tosatti

[S390] move sie code to entry.S

2011-07-24T08:48:21+00:00

The entry to / exit from sie has subtle dependencies to the first level interrupt handler. Move the sie assembler code to entry64.S and replace the SIE_HOOK callback with a test and the new _TIF_SIE bit. In addition this patch fixes several problems in regard to the check for the_TIF_EXIT_SIE bits. The old code checked the TIF bits before executing the interrupt handler and it only modified the instruction address if it pointed directly to the sie instruction. In both cases it could miss a TIF bit that normally would cause an exit from the guest and would reenter the guest context. Signed-off-by: Martin Schwidefsky

s390: change to new flag variable

2011-03-17T13:02:57+00:00

Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney Acked-by: WANG Cong Signed-off-by: Michal Marek

KVM: s390: intercepts for diagnose instructions

2008-04-27T09:00:46+00:00

This patch introduces interpretation of some diagnose instruction intercepts. Diagnose is our classic architected way of doing a hypercall. This patch features the following diagnose codes: - vm storage size, that tells the guest about its memory layout - time slice end, which is used by the guest to indicate that it waits for a lock and thus cannot use up its time slice in a useful way - ipl functions, which a guest can use to reset and reboot itself In order to implement ipl functions, we also introduce an exit reason that causes userspace to perform various resets on the virtual machine. All resets are described in the principles of operation book, except KVM_S390_RESET_IPL which causes a reboot of the machine. Acked-by: Martin Schwidefsky Signed-off-by: Christian Borntraeger Signed-off-by: Carsten Otte Signed-off-by: Avi Kivity

KVM: s390: interprocessor communication via sigp

2008-04-27T09:00:46+00:00

This patch introduces in-kernel handling of _some_ sigp interprocessor signals (similar to ipi). kvm_s390_handle_sigp() decodes the sigp instruction and calls individual handlers depending on the operation requested: - sigp sense tries to retrieve information such as existence or running state of the remote cpu - sigp emergency sends an external interrupt to the remove cpu - sigp stop stops a remove cpu - sigp stop store status stops a remote cpu, and stores its entire internal state to the cpus lowcore - sigp set arch sets the architecture mode of the remote cpu. setting to ESAME (s390x 64bit) is accepted, setting to ESA/S390 (s390, 31 or 24 bit) is denied, all others are passed to userland - sigp set prefix sets the prefix register of a remote cpu For implementation of this, the stop intercept indication starts to get reused on purpose: a set of action bits defines what to do once a cpu gets stopped: ACTION_STOP_ON_STOP really stops the cpu when a stop intercept is recognized ACTION_STORE_ON_STOP stores the cpu status to lowcore when a stop intercept is recognized Acked-by: Martin Schwidefsky Signed-off-by: Christian Borntraeger Signed-off-by: Carsten Otte Signed-off-by: Carsten Otte Signed-off-by: Avi Kivity