BMC/Intel-BMC/linux.git/arch/s390/include/asm, branch dev-4.3

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2015-10-06T13:59:36+00:00

Pull s390 fixes from Martin Schwidefsky: "Three bug fixes and an update to the default configuration" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/defconfig: set SCSI_DH=y s390/vtime: correct scaled cputime of partially idle CPUs s390/boot/decompression: disable floating point in decompressor s390/numa: use correct type for node_to_cpumask_map

Merge branch 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile

2015-10-04T15:31:13+00:00

Pull strscpy string copy function implementation from Chris Metcalf. Chris sent this during the merge window, but I waffled back and forth on the pull request, which is why it's going in only now. The new "strscpy()" function is definitely easier to use and more secure than either strncpy() or strlcpy(), both of which are horrible nasty interfaces that have serious and irredeemable problems. strncpy() has a useless return value, and doesn't NUL-terminate an overlong result. To make matters worse, it pads a short result with zeroes, which is a performance disaster if you have big buffers. strlcpy(), by contrast, is a mis-designed "fix" for strlcpy(), lacking the insane NUL padding, but having a differently broken return value which returns the original length of the source string. Which means that it will read characters past the count from the source buffer, and you have to trust the source to be properly terminated. It also makes error handling fragile, since the test for overflow is unnecessarily subtle. strscpy() avoids both these problems, guaranteeing the NUL termination (but not excessive padding) if the destination size wasn't zero, and making the overflow condition very obvious by returning -E2BIG. It also doesn't read past the size of the source, and can thus be used for untrusted source data too. So why did I waffle about this for so long? Every time we introduce a new-and-improved interface, people start doing these interminable series of trivial conversion patches. And every time that happens, somebody does some silly mistake, and the conversion patch to the improved interface actually makes things worse. Because the patch is mindnumbing and trivial, nobody has the attention span to look at it carefully, and it's usually done over large swatches of source code which means that not every conversion gets tested. So I'm pulling the strscpy() support because it *is* a better interface. But I will refuse to pull mindless conversion patches. Use this in places where it makes sense, but don't do trivial patches to fix things that aren't actually known to be broken. * 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: use global strscpy() rather than private copy string: provide strscpy() Make asm/word-at-a-time.h available on all architectures

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2015-09-25T17:51:40+00:00

Pull KVM fixes from Paolo Bonzini: "AMD fixes for bugs introduced in the 4.2 merge window, and a few PPC bug fixes too" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: disable halt_poll_ns as default for s390x KVM: x86: fix off-by-one in reserved bits check KVM: x86: use correct page table format to check nested page table reserved bits KVM: svm: do not call kvm_set_cr0 from init_vmcb KVM: x86: trap AMD MSRs for the TSeg base and mask KVM: PPC: Book3S: Take the kvm->srcu lock in kvmppc_h_logical_ci_load/store() KVM: PPC: Book3S HV: Pass the correct trap argument to kvmhv_commence_exit KVM: PPC: Book3S HV: Fix handling of interrupted VCPUs kvm: svm: reset mmu on VCPU reset

KVM: disable halt_poll_ns as default for s390x

2015-09-25T08:31:30+00:00

We observed some performance degradation on s390x with dynamic halt polling. Until we can provide a proper fix, let's enable halt_poll_ns as default only for supported architectures. Architectures are now free to set their own halt_poll_ns default value. Signed-off-by: David Hildenbrand Signed-off-by: Paolo Bonzini

s390/numa: use correct type for node_to_cpumask_map

2015-09-23T07:18:56+00:00

With CONFIG_CPUMASK_OFFSTACK=y cpumask_var_t is a pointer to a CPU mask. Replace the incorrect type for node_to_cpumask_map with cpumask_t. Signed-off-by: Martin Schwidefsky

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2015-09-21T16:53:30+00:00

Pull s390 fixes from Martin Schwidefsky: "A couple of system call updates. The two new system calls userfaultfd and membarrier have been added, as well as the 17 direct calls for the multiplexed socket system calls. In addition the system call compat wrappers have been flagged as notrace functions and a few wrappers could be removed. And bug fixes for the vector register handling, cpu_mf, suspend/resume, compat signals, SMT cputime accounting and the zfcp dumper" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: wire up separate socketcalls system calls s390/compat: remove superfluous compat wrappers s390/compat: do not trace compat wrapper functions s390/s390x: allocate sys_membarrier system call number s390/configs//zfcpdump_defconfig: Remove CONFIG_MEMSTICK s390: wire up userfaultfd system call s390/vtime: correct scaled cputime for SMT s390/cpum_cf: Corrected return code for unauthorized counter sets s390/compat: correct uc_sigmask of the compat signal frame s390: fix floating point register corruption s390/hibernate: fix save and restore of vector registers

s390: wire up separate socketcalls system calls

2015-09-18T09:16:53+00:00

As discussed on linux-arch all architectures should wire up the separate system calls that are hidden behind the socketcall multiplexer system call. It's just a couple more system calls and gives us a very small performance improvement. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

KVM: add halt_attempted_poll to VCPU stats

2015-09-16T10:17:00+00:00

This new statistic can help diagnosing VCPUs that, for any reason, trigger bad behavior of halt_poll_ns autotuning. For example, say halt_poll_ns = 480000, and wakeups are spaced exactly like 479us, 481us, 479us, 481us. Then KVM always fails polling and wastes 10+20+40+80+160+320+480 = 1110 microseconds out of every 479+481+479+481+479+481+479 = 3359 microseconds. The VCPU then is consuming about 30% more CPU than it would use without polling. This would show as an abnormally high number of attempted polling compared to the successful polls. Acked-by: Christian Borntraeger Signed-off-by: Paolo Bonzini

dma-mapping: consolidate dma_set_mask

2015-09-10T20:29:01+00:00

Almost everyone implements dma_set_mask the same way, although some time that's hidden in ->set_dma_mask methods. This patch consolidates those into a common implementation that either calls ->set_dma_mask if present or otherwise uses the default implementation. Some architectures used to only call ->set_dma_mask after the initial checks, and those instance have been fixed to do the full work. h8300 implemented dma_set_mask bogusly as a no-ops and has been fixed. Unfortunately some architectures overload unrelated semantics like changing the dma_ops into it so we still need to allow for an architecture override for now. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: Christoph Hellwig Cc: Arnd Bergmann Cc: Russell King Cc: Catalin Marinas Cc: Will Deacon Cc: Yoshinori Sato Cc: Michal Simek Cc: Jonas Bonn Cc: Chris Metcalf Cc: Guan Xuetao Cc: Ralf Baechle Cc: Benjamin Herrenschmidt Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Andy Shevchenko Signed-off-by: Max Filippov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

dma-mapping: consolidate dma_supported

2015-09-10T20:29:01+00:00

Most architectures just call into ->dma_supported, but some also return 1 if the method is not present, or 0 if no dma ops are present (although that should never happeb). Consolidate this more broad version into common code. Also fix h8300 which inorrectly always returned 0, which would have been a problem if it's dma_set_mask implementation wasn't a similarly buggy noop. As a few architectures have much more elaborate implementations, we still allow for arch overrides. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: Christoph Hellwig Cc: Arnd Bergmann Cc: Russell King Cc: Catalin Marinas Cc: Will Deacon Cc: Yoshinori Sato Cc: Michal Simek Cc: Jonas Bonn Cc: Chris Metcalf Cc: Guan Xuetao Cc: Ralf Baechle Cc: Benjamin Herrenschmidt Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Andy Shevchenko Signed-off-by: Max Filippov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds