Intel OpenBMC Linux kernel source tree (mirror) https://git.radix-linux.su/BMC/Intel-BMC/linux.git/atom?h=dev 2015-04-07T07:15:13+00:00 2015-04-07T07:15:13+00:00 Michael Ellerman mpe@ellerman.id.au 2015-03-19T04:15:20+00:00 urn:sha1:bf4981a00636347ddcef3fc008e4dd979380a851 The celleb code has seen no actual development for ~7 years. We (maintainers) have no access to test hardware, and it is highly likely the code has bit-rotted. As far as we're aware the hardware was never widely available, and is certainly no longer available, and no one on the list has shown any interest in it over the years. So remove it. If anyone has one and cares please speak up. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Jeremy Kerr <jk@ozlabs.org> 2014-06-11T06:35:38+00:00 Michael Ellerman mpe@ellerman.id.au 2014-06-02T01:20:46+00:00 urn:sha1:fb5a515704d7e84c139140a83c5eff515adfc000 __attribute__ ((unused)) WSP is the last user of CONFIG_PPC_A2, so we remove that as well. Although CONFIG_PPC_ICSWX still exists, it's no longer selectable for any Book3E platform, so we can remove the code in mmu-book3e.h that depended on it. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 2013-08-14T04:57:50+00:00 Benjamin Herrenschmidt benh@kernel.crashing.org 2013-07-15T03:03:08+00:00 urn:sha1:ecd73cc5c9e137559f4625b347f20cf9ed0de3d5 Remove the generic PPC_INDIRECT_IO and ensure we only add overhead to the right accessors. IE. If only CONFIG_PPC_INDIRECT_PIO is set, we don't add overhead to all MMIO accessors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 2013-07-04T17:29:23+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-07-04T17:29:23+00:00 urn:sha1:65b97fb7303050fc826e518cf67fc283da23314f Pull powerpc updates from Ben Herrenschmidt: "This is the powerpc changes for the 3.11 merge window. In addition to the usual bug fixes and small updates, the main highlights are: - Support for transparent huge pages by Aneesh Kumar for 64-bit server processors. This allows the use of 16M pages as transparent huge pages on kernels compiled with a 64K base page size. - Base VFIO support for KVM on power by Alexey Kardashevskiy - Wiring up of our nvram to the pstore infrastructure, including putting compressed oopses in there by Aruna Balakrishnaiah - Move, rework and improve our "EEH" (basically PCI error handling and recovery) infrastructure. It is no longer specific to pseries but is now usable by the new "powernv" platform as well (no hypervisor) by Gavin Shan. - I fixed some bugs in our math-emu instruction decoding and made it usable to emulate some optional FP instructions on processors with hard FP that lack them (such as fsqrt on Freescale embedded processors). - Support for Power8 "Event Based Branch" facility by Michael Ellerman. This facility allows what is basically "userspace interrupts" for performance monitor events. - A bunch of Transactional Memory vs. Signals bug fixes and HW breakpoint/watchpoint fixes by Michael Neuling. And more ... I appologize in advance if I've failed to highlight something that somebody deemed worth it." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (156 commits) pstore: Add hsize argument in write_buf call of pstore_ftrace_call powerpc/fsl: add MPIC timer wakeup support powerpc/mpic: create mpic subsystem object powerpc/mpic: add global timer support powerpc/mpic: add irq_set_wake support powerpc/85xx: enable coreint for all the 64bit boards powerpc/8xx: Erroneous double irq_eoi() on CPM IRQ in MPC8xx powerpc/fsl: Enable CONFIG_E1000E in mpc85xx_smp_defconfig powerpc/mpic: Add get_version API both for internal and external use powerpc: Handle both new style and old style reserve maps powerpc/hw_brk: Fix off by one error when validating DAWR region end powerpc/pseries: Support compression of oops text via pstore powerpc/pseries: Re-organise the oops compression code pstore: Pass header size in the pstore write callback powerpc/powernv: Fix iommu initialization again powerpc/pseries: Inform the hypervisor we are using EBB regs powerpc/perf: Add power8 EBB support powerpc/perf: Core EBB support for 64-bit book3s powerpc/perf: Drop MMCRA from thread_struct powerpc/perf: Don't enable if we have zero events ... 2013-07-01T23:38:42+00:00 Dongsheng.wang@freescale.com Dongsheng.wang@freescale.com 2013-04-09T02:22:32+00:00 urn:sha1:a63b3bc7db32b63bfe5f48fa8582f931db81c86e The driver provides a way to wake up the system by the MPIC timer. For example, echo 5 > /sys/devices/system/mpic/timer_wakeup echo standby > /sys/power/state After 5 seconds the MPIC timer will generate an interrupt to wake up the system. Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> 2013-07-01T23:38:41+00:00 Dongsheng.wang@freescale.com Dongsheng.wang@freescale.com 2013-04-09T02:22:30+00:00 urn:sha1:36ca09be6ff77a4e5b54b8b68ed7be7aa184250b The MPIC global timer is a hardware timer inside the Freescale PIC complying with OpenPIC standard. When the specified interval times out, the hardware timer generates an interrupt. The driver currently is only tested on fsl chip, but it can potentially support other global timers complying to OpenPIC standard. The two independent groups of global timer on fsl chip, group A and group B, are identical in their functionality, except that they appear at different locations within the PIC register map. The hardware timer can be cascaded to create timers larger than the default 31-bit global timers. Timer cascade fields allow configuration of up to two 63-bit timers. But These two groups of timers cannot be cascaded together. It can be used as a wakeup source for low power modes. It also could be used as periodical timer for protocols, drivers and etc. Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> 2013-06-20T07:05:35+00:00 Gavin Shan shangw@linux.vnet.ibm.com 2013-06-20T05:20:52+00:00 urn:sha1:317f06de78152e0eb0aab5881d69e4c5cdf9f1fe The patch moves the common part of EEH core into arch/powerpc/kernel directory so that we needn't PPC_PSERIES while compiling POWERNV platform: * Move the EEH common part into arch/powerpc/kernel * Move the functions for PCI hotplug from pSeries platform to arch/powerpc/kernel/pci-hotplug.c * Move CONFIG_EEH from arch/powerpc/platforms/pseries/Kconfig to arch/powerpc/platforms/Kconfig * Adjust makefile accordingly Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> 2013-06-07T11:44:39+00:00 Viresh Kumar viresh.kumar@linaro.org 2013-04-04T12:54:25+00:00 urn:sha1:7fb6a53db58c729ff470095371f431b6d66c527b Move cpufreq driver of powerpc platform to drivers/cpufreq. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> 2013-05-14T14:43:11+00:00 Linus Torvalds torvalds@linux-foundation.org 2013-05-14T14:43:11+00:00 urn:sha1:a2c7a54fcc36dc3d0d461e883d9535f8f52f5a3f Pull powerpc fixes from Benjamin Herrenschmidt: "This is mostly bug fixes (some of them regressions, some of them I deemed worth merging now) along with some patches from Li Zhong hooking up the new context tracking stuff (for the new full NO_HZ)" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (25 commits) powerpc: Set show_unhandled_signals to 1 by default powerpc/perf: Fix setting of "to" addresses for BHRB powerpc/pmu: Fix order of interpreting BHRB target entries powerpc/perf: Move BHRB code into CONFIG_PPC64 region powerpc: select HAVE_CONTEXT_TRACKING for pSeries powerpc: Use the new schedule_user API on userspace preemption powerpc: Exit user context on notify resume powerpc: Exception hooks for context tracking subsystem powerpc: Syscall hooks for context tracking subsystem powerpc/booke64: Fix kernel hangs at kernel_dbg_exc powerpc: Fix irq_set_affinity() return values powerpc: Provide __bswapdi2 powerpc/powernv: Fix starting of secondary CPUs on OPALv2 and v3 powerpc/powernv: Detect OPAL v3 API version powerpc: Fix MAX_STACK_TRACE_ENTRIES too low warning again powerpc: Make CONFIG_RTAS_PROC depend on CONFIG_PROC_FS powerpc: Bring all threads online prior to migration/hibernation powerpc/rtas_flash: Fix validate_flash buffer overflow issue powerpc/kexec: Fix kexec when using VMX optimised memcpy powerpc: Fix build errors STRICT_MM_TYPECHECKS ... 2013-05-14T04:36:32+00:00 Michael Ellerman michael@ellerman.id.au 2013-05-06T18:43:39+00:00 urn:sha1:b80ec3dc8e100f6c8b27c02cbb6079d401c3a054 We are getting build errors with CONFIG_PROC_FS=n: arch/powerpc/kernel/rtas_flash.c In function 'rtas_flash_init': 745:33: error: unused variable 'f' [-Werror=unused-variable] But rtas_flash.c should not be built when CONFIG_PROC_FS=n, beacause all it does is provide a /proc interface to the RTAS flash routines. CONFIG_RTAS_FLASH already depends on CONFIG_RTAS_PROC, to indicate that it depends on the RTAS proc support, but CONFIG_RTAS_PROC does not depend on CONFIG_PROC_FS. So fix that. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>