BMC/Intel-BMC/linux.git/arch/powerpc/kvm, branch dev-4.6

KVM: PPC: Book3S HV: Fix build error in book3s_hv.c

2016-06-01T19:18:02+00:00

commit 07f8ab255fcc0bce1fabc8fb35ace4f0f5d2ac67 upstream. When CONFIG_KVM_XICS is enabled, CPU_UP_PREPARE and other macros for CPU states in linux/cpu.h are needed by arch/powerpc/kvm/book3s_hv.c. Otherwise, build error as below is seen: gwshan@gwshan:~/sandbox/l$ make arch/powerpc/kvm/book3s_hv.o : CC arch/powerpc/kvm/book3s_hv.o arch/powerpc/kvm/book3s_hv.c: In function ‘kvmppc_cpu_notify’: arch/powerpc/kvm/book3s_hv.c:3072:7: error: ‘CPU_UP_PREPARE’ \ undeclared (first use in this function) This fixes the issue introduced by commit <6f3bb80944> ("KVM: PPC: Book3S HV: kvmppc_host_rm_ops - handle offlining CPUs"). Fixes: 6f3bb8094414 Signed-off-by: Gavin Shan Reviewed-by: Balbir Singh Signed-off-by: Paul Mackerras Signed-off-by: Greg Kroah-Hartman

KVM: PPC: do not compile in vfio.o unconditionally

2016-03-22T15:38:38+00:00

Build on 32-bit PPC fails with the following error: int kvm_vfio_ops_init(void) ^ In file included from arch/powerpc/kvm/../../../virt/kvm/vfio.c:21:0: arch/powerpc/kvm/../../../virt/kvm/vfio.h:8:90: note: previous definition of ‘kvm_vfio_ops_init’ was here arch/powerpc/kvm/../../../virt/kvm/vfio.c:292:6: error: redefinition of ‘kvm_vfio_ops_exit’ void kvm_vfio_ops_exit(void) ^ In file included from arch/powerpc/kvm/../../../virt/kvm/vfio.c:21:0: arch/powerpc/kvm/../../../virt/kvm/vfio.h:12:91: note: previous definition of ‘kvm_vfio_ops_exit’ was here scripts/Makefile.build:258: recipe for target arch/powerpc/kvm/../../../virt/kvm/vfio.o failed make[3]: *** [arch/powerpc/kvm/../../../virt/kvm/vfio.o] Error 1 Check whether CONFIG_KVM_VFIO is set before including vfio.o in the build. Reported-by: Pranith Kumar Tested-by: Pranith Kumar Signed-off-by: Paolo Bonzini

KVM/PPC: update the comment of memory barrier in the kvmppc_prepare_to_enter()

2016-03-22T15:38:37+00:00

The barrier also orders the write to mode from any reads to the page tables done and so update the comment. Signed-off-by: Lan Tianyu Signed-off-by: Paolo Bonzini

KVM: PPC: Create a virtual-mode only TCE table handlers

2016-03-22T11:02:51+00:00

Upcoming in-kernel VFIO acceleration needs different handling in real and virtual modes which makes it hard to support both modes in the same handler. This creates a copy of kvmppc_rm_h_stuff_tce and kvmppc_rm_h_put_tce in addition to the existing kvmppc_rm_h_put_tce_indirect. This also fixes linker breakage when only PR KVM was selected (leaving HV KVM off): the kvmppc_h_put_tce/kvmppc_h_stuff_tce functions would not compile at all and the linked would fail. Signed-off-by: Alexey Kardashevskiy Signed-off-by: Paolo Bonzini

Merge tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

2016-03-19T22:38:41+00:00

Pull powerpc updates from Michael Ellerman: "This was delayed a day or two by some build-breakage on old toolchains which we've now fixed. There's two PCI commits both acked by Bjorn. There's one commit to mm/hugepage.c which is (co)authored by Kirill. Highlights: - Restructure Linux PTE on Book3S/64 to Radix format from Paul Mackerras - Book3s 64 MMU cleanup in preparation for Radix MMU from Aneesh Kumar K.V - Add POWER9 cputable entry from Michael Neuling - FPU/Altivec/VSX save/restore optimisations from Cyril Bur - Add support for new ftrace ABI on ppc64le from Torsten Duwe Various cleanups & minor fixes from: - Adam Buchbinder, Andrew Donnellan, Balbir Singh, Christophe Leroy, Cyril Bur, Luis Henriques, Madhavan Srinivasan, Pan Xinhui, Russell Currey, Sukadev Bhattiprolu, Suraj Jitindar Singh. General: - atomics: Allow architectures to define their own __atomic_op_* helpers from Boqun Feng - Implement atomic{, 64}_*_return_* variants and acquire/release/ relaxed variants for (cmp)xchg from Boqun Feng - Add powernv_defconfig from Jeremy Kerr - Fix BUG_ON() reporting in real mode from Balbir Singh - Add xmon command to dump OPAL msglog from Andrew Donnellan - Add xmon command to dump process/task similar to ps(1) from Douglas Miller - Clean up memory hotplug failure paths from David Gibson pci/eeh: - Redesign SR-IOV on PowerNV to give absolute isolation between VFs from Wei Yang. - EEH Support for SRIOV VFs from Wei Yang and Gavin Shan. - PCI/IOV: Rename and export virtfn_{add, remove} from Wei Yang - PCI: Add pcibios_bus_add_device() weak function from Wei Yang - MAINTAINERS: Update EEH details and maintainership from Russell Currey cxl: - Support added to the CXL driver for running on both bare-metal and hypervisor systems, from Christophe Lombard and Frederic Barrat. - Ignore probes for virtual afu pci devices from Vaibhav Jain perf: - Export Power8 generic and cache events to sysfs from Sukadev Bhattiprolu - hv-24x7: Fix usage with chip events, display change in counter values, display domain indices in sysfs, eliminate domain suffix in event names, from Sukadev Bhattiprolu Freescale: - Updates from Scott: "Highlights include 8xx optimizations, 32-bit checksum optimizations, 86xx consolidation, e5500/e6500 cpu hotplug, more fman and other dt bits, and minor fixes/cleanup" * tag 'powerpc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (179 commits) powerpc: Fix unrecoverable SLB miss during restore_math() powerpc/8xx: Fix do_mtspr_cpu6() build on older compilers powerpc/rcpm: Fix build break when SMP=n powerpc/book3e-64: Use hardcoded mttmr opcode powerpc/fsl/dts: Add "jedec,spi-nor" flash compatible powerpc/T104xRDB: add tdm riser card node to device tree powerpc32: PAGE_EXEC required for inittext powerpc/mpc85xx: Add pcsphy nodes to FManV3 device tree powerpc/mpc85xx: Add MDIO bus muxing support to the board device tree(s) powerpc/86xx: Introduce and use common dtsi powerpc/86xx: Update device tree powerpc/86xx: Move dts files to fsl directory powerpc/86xx: Switch to kconfig fragments approach powerpc/86xx: Update defconfigs powerpc/86xx: Consolidate common platform code powerpc32: Remove one insn in mulhdu powerpc32: small optimisation in flush_icache_range() powerpc: Simplify test in __dma_sync() powerpc32: move xxxxx_dcache_range() functions inline powerpc32: Remove clear_pages() and define clear_page() inline ...

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2016-03-16T16:55:35+00:00

Pull KVM updates from Paolo Bonzini: "One of the largest releases for KVM... Hardly any generic changes, but lots of architecture-specific updates. ARM: - VHE support so that we can run the kernel at EL2 on ARMv8.1 systems - PMU support for guests - 32bit world switch rewritten in C - various optimizations to the vgic save/restore code. PPC: - enabled KVM-VFIO integration ("VFIO device") - optimizations to speed up IPIs between vcpus - in-kernel handling of IOMMU hypercalls - support for dynamic DMA windows (DDW). s390: - provide the floating point registers via sync regs; - separated instruction vs. data accesses - dirty log improvements for huge guests - bugfixes and documentation improvements. x86: - Hyper-V VMBus hypercall userspace exit - alternative implementation of lowest-priority interrupts using vector hashing (for better VT-d posted interrupt support) - fixed guest debugging with nested virtualizations - improved interrupt tracking in the in-kernel IOAPIC - generic infrastructure for tracking writes to guest memory - currently its only use is to speedup the legacy shadow paging (pre-EPT) case, but in the future it will be used for virtual GPUs as well - much cleanup (LAPIC, kvmclock, MMU, PIT), including ubsan fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (217 commits) KVM: x86: remove eager_fpu field of struct kvm_vcpu_arch KVM: x86: disable MPX if host did not enable MPX XSAVE features arm64: KVM: vgic-v3: Only wipe LRs on vcpu exit arm64: KVM: vgic-v3: Reset LRs at boot time arm64: KVM: vgic-v3: Do not save an LR known to be empty arm64: KVM: vgic-v3: Save maintenance interrupt state only if required arm64: KVM: vgic-v3: Avoid accessing ICH registers KVM: arm/arm64: vgic-v2: Make GICD_SGIR quicker to hit KVM: arm/arm64: vgic-v2: Only wipe LRs on vcpu exit KVM: arm/arm64: vgic-v2: Reset LRs at boot time KVM: arm/arm64: vgic-v2: Do not save an LR known to be empty KVM: arm/arm64: vgic-v2: Move GICH_ELRSR saving to its own function KVM: arm/arm64: vgic-v2: Save maintenance interrupt state only if required KVM: arm/arm64: vgic-v2: Avoid accessing GICH registers KVM: s390: allocate only one DMA page per VM KVM: s390: enable STFLE interpretation only if enabled for the guest KVM: s390: wake up when the VCPU cpu timer expires KVM: s390: step the VCPU timer while in enabled wait KVM: s390: protect VCPU cpu timer with a seqcount KVM: s390: step VCPU cpu timer during kvm_run ioctl ...

Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2016-03-15T02:14:06+00:00

Pull scheduler updates from Ingo Molnar: "The main changes in this cycle are: - Make schedstats a runtime tunable (disabled by default) and optimize it via static keys. As most distributions enable CONFIG_SCHEDSTATS=y due to its instrumentation value, this is a nice performance enhancement. (Mel Gorman) - Implement 'simple waitqueues' (swait): these are just pure waitqueues without any of the more complex features of full-blown waitqueues (callbacks, wake flags, wake keys, etc.). Simple waitqueues have less memory overhead and are faster. Use simple waitqueues in the RCU code (in 4 different places) and for handling KVM vCPU wakeups. (Peter Zijlstra, Daniel Wagner, Thomas Gleixner, Paul Gortmaker, Marcelo Tosatti) - sched/numa enhancements (Rik van Riel) - NOHZ performance enhancements (Rik van Riel) - Various sched/deadline enhancements (Steven Rostedt) - Various fixes (Peter Zijlstra) - ... and a number of other fixes, cleanups and smaller enhancements" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits) sched/cputime: Fix steal_account_process_tick() to always return jiffies sched/deadline: Remove dl_new from struct sched_dl_entity Revert "kbuild: Add option to turn incompatible pointer check into error" sched/deadline: Remove superfluous call to switched_to_dl() sched/debug: Fix preempt_disable_ip recording for preempt_disable() sched, time: Switch VIRT_CPU_ACCOUNTING_GEN to jiffy granularity time, acct: Drop irq save & restore from __acct_update_integrals() acct, time: Change indentation in __acct_update_integrals() sched, time: Remove non-power-of-two divides from __acct_update_integrals() sched/rt: Kick RT bandwidth timer immediately on start up sched/debug: Add deadline scheduler bandwidth ratio to /proc/sched_debug sched/debug: Move sched_domain_sysctl to debug.c sched/debug: Move the /sys/kernel/debug/sched_features file setup into debug.c sched/rt: Fix PI handling vs. sched_setscheduler() sched/core: Remove duplicated sched_group_set_shares() prototype sched/fair: Consolidate nohz CPU load update code sched/fair: Avoid using decay_load_missed() with a negative value sched/deadline: Always calculate end of period on sched_yield() sched/cgroup: Fix cgroup entity load tracking tear-down rcu: Use simple wait queues where possible in rcutree ...

KVM: PPC: Book3S HV: Sanitize special-purpose register values on guest exit

2016-03-08T02:36:42+00:00

Thomas Huth discovered that a guest could cause a hard hang of a host CPU by setting the Instruction Authority Mask Register (IAMR) to a suitable value. It turns out that this is because when the code was added to context-switch the new special-purpose registers (SPRs) that were added in POWER8, we forgot to add code to ensure that they were restored to a sane value on guest exit. This adds code to set those registers where a bad value could compromise the execution of the host kernel to a suitable neutral value on guest exit. Cc: stable@vger.kernel.org # v3.14+ Fixes: b005255e12a3 Reported-by: Thomas Huth Reviewed-by: David Gibson Signed-off-by: Paul Mackerras

powerpc/mm: Move hash related mmu-*.h headers to book3s/

2016-03-03T10:19:21+00:00

No code changes. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman

KVM: PPC: Add support for 64bit TCE windows

2016-03-01T22:56:50+00:00

The existing KVM_CREATE_SPAPR_TCE only supports 32bit windows which is not enough for directly mapped windows as the guest can get more than 4GB. This adds KVM_CREATE_SPAPR_TCE_64 ioctl and advertises it via KVM_CAP_SPAPR_TCE_64 capability. The table size is checked against the locked memory limit. Since 64bit windows are to support Dynamic DMA windows (DDW), let's add @bus_offset and @page_shift which are also required by DDW. Signed-off-by: Alexey Kardashevskiy Signed-off-by: Paul Mackerras