BMC/Intel-BMC/linux.git/arch/powerpc/kernel/pci_of_scan.c, branch dev

powerpc/PCI: Disable MSI/MSI-X interrupts at PCI probe time in OF case

2015-08-26T11:40:50+00:00

Since commit 1851617cd2da ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI"), the setup of dev->msi_cap/msix_cap and the disable of MSI/MSI-X interrupts isn't being done at PCI probe time, as the logic responsible for this was moved in the aforementioned commit from pci_device_add() to pci_setup_device(). The latter function is not reachable on PowerPC pseries platform during Open Firmware PCI probing time. This exhibits as drivers not being able to enable MSI, eg: bnx2x 0000:01:00.0: no msix capability found This patch calls pci_msi_setup_pci_dev() explicitly to disable MSI/MSI-X during PCI probe time on pSeries platform. Fixes: 1851617cd2da ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI") [mpe: Flesh out change log and clarify comment] Signed-off-by: Guilherme G. Piccoli Signed-off-by: Michael Ellerman

powerpc: Remove shims for pci_controller_ops operations

2015-04-11T10:49:18+00:00

Remove shims, patch callsites to use pci_controller_ops versions instead. Also move back the probe mode defines, as explained in the patch for pci_probe_mode. Signed-off-by: Daniel Axtens Signed-off-by: Michael Ellerman

powerpc: Create pci_controller_ops.probe_mode and shim

2015-04-11T10:49:12+00:00

Add pci_controller_ops.probe_mode, shadowing ppc_md.pci_probe_mode. Add a shim, and changes the callsites to use the shim. We also need to move the probe mode defines to pci-bridge.h from pci.h. They are required by the shim in order to return a sensible default. Previously, the were defined in pci.h, but pci.h includes pci-bridge.h before the relevant #defines. This means the definitions are absent if pci.h is included before pci-bridge.h. This occurs in some drivers. So, move the definitons now, and move them back when we remove the shim. Anything that wants the defines would have had to include pci.h, and since pci.h includes pci-bridge.h, nothing will lose access to the defines. Signed-off-by: Daniel Axtens Signed-off-by: Michael Ellerman

powerpc/eeh: Remove device_node dependency

2015-03-24T02:15:53+00:00

The patch removes struct eeh_dev::dn and the corresponding helper functions: eeh_dev_to_of_node() and of_node_to_eeh_dev(). Instead, eeh_dev_to_pdn() and pdn_to_eeh_dev() should be used to get the pdn, which might contain device_node on PowerNV platform. Signed-off-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt

powerpc: Make a bunch of things static

2014-09-25T13:14:41+00:00

Signed-off-by: Anton Blanchard Signed-off-by: Michael Ellerman

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

2014-06-11T01:54:22+00:00

Pull powerpc updates from Ben Herrenschmidt: "Here is the bulk of the powerpc changes for this merge window. It got a bit delayed in part because I wasn't paying attention, and in part because I discovered I had a core PCI change without a PCI maintainer ack in it. Bjorn eventually agreed it was ok to merge it though we'll probably improve it later and I didn't want to rebase to add his ack. There is going to be a bit more next week, essentially fixes that I still want to sort through and test. The biggest item this time is the support to build the ppc64 LE kernel with our new v2 ABI. We previously supported v2 userspace but the kernel itself was a tougher nut to crack. This is now sorted mostly thanks to Anton and Rusty. We also have a fairly big series from Cedric that add support for 64-bit LE zImage boot wrapper. This was made harder by the fact that traditionally our zImage wrapper was always 32-bit, but our new LE toolchains don't really support 32-bit anymore (it's somewhat there but not really "supported") so we didn't want to rely on it. This meant more churn that just endian fixes. This brings some more LE bits as well, such as the ability to run in LE mode without a hypervisor (ie. under OPAL firmware) by doing the right OPAL call to reinitialize the CPU to take HV interrupts in the right mode and the usual pile of endian fixes. There's another series from Gavin adding EEH improvements (one day we *will* have a release with less than 20 EEH patches, I promise!). Another highlight is the support for the "Split core" functionality on P8 by Michael. This allows a P8 core to be split into "sub cores" of 4 threads which allows the subcores to run different guests under KVM (the HW still doesn't support a partition per thread). And then the usual misc bits and fixes ..." [ Further delayed by gmail deciding that BenH is a dirty spammer. Google knows. ] * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (155 commits) powerpc/powernv: Add missing include to LPC code selftests/powerpc: Test the THP bug we fixed in the previous commit powerpc/mm: Check paca psize is up to date for huge mappings powerpc/powernv: Pass buffer size to OPAL validate flash call powerpc/pseries: hcall functions are exported to modules, need _GLOBAL_TOC() powerpc: Exported functions __clear_user and copy_page use r2 so need _GLOBAL_TOC() powerpc/powernv: Set memory_block_size_bytes to 256MB powerpc: Allow ppc_md platform hook to override memory_block_size_bytes powerpc/powernv: Fix endian issues in memory error handling code powerpc/eeh: Skip eeh sysfs when eeh is disabled powerpc: 64bit sendfile is capped at 2GB powerpc/powernv: Provide debugfs access to the LPC bus via OPAL powerpc/serial: Use saner flags when creating legacy ports powerpc: Add cpu family documentation powerpc/xmon: Fix up xmon format strings powerpc/powernv: Add calls to support little endian host powerpc: Document sysfs DSCR interface powerpc: Fix regression of per-CPU DSCR setting powerpc: Split __SYSFS_SPRSETUP macro arch: powerpc/fadump: Cleaning up inconsistent NULL checks ...

powerpc/PCI: Use pci_is_bridge() to simplify code

2014-05-27T20:57:36+00:00

Use pci_is_bridge() to simplify code. No functional change. Requires: 326c1cdae741 PCI: Rename pci_is_bridge() to pci_has_subordinate() Requires: 1c86438c9423 PCI: Add new pci_is_bridge() interface Signed-off-by: Yijing Wang Signed-off-by: Bjorn Helgaas

powerpc/eeh: No hotplug on permanently removed dev

2014-04-28T07:34:32+00:00

The issue was detected in a bit complicated test case where we have multiple hierarchical PEs shown as following figure: +-----------------+ | PE#3 p2p#0 | | p2p#1 | +-----------------+ | +-----------------+ | PE#4 pdev#0 | | pdev#1 | +-----------------+ PE#4 (have 2 PCI devices) is the child of PE#3, which has 2 p2p bridges. We accidentally had less-known scenario: PE#4 was removed permanently from the system because of permanent failure (e.g. exceeding the max allowd failure times in last hour), then we detects EEH errors on PE#3 and tried to recover it. However, eeh_dev instances for pdev#0/1 were not detached from PE#4, which was still connected to PE#3. All of that was because of the fact that we rely on count-based pcibios_release_device(), which isn't reliable enough. When doing recovery for PE#3, we still apply hotplug on PE#4 and pdev#0/1, which are not valid any more. Eventually, we run into kernel crash. The patch fixes above issue from two aspects. For unplug, we simply skip those permanently removed PE, whose state is (EEH_PE_STATE_ISOLATED && !EEH_PE_STATE_RECOVERING) and its frozen count should be greater than EEH_MAX_ALLOWED_FREEZES. For plug, we marked all permanently removed EEH devices with EEH_DEV_REMOVED and return 0xFF's on read its PCI config so that PCI core will omit them. Signed-off-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt

PCI: Convert pcibios_resource_to_bus() to take a pci_bus, not a pci_dev

2013-12-21T17:06:10+00:00

These interfaces: pcibios_resource_to_bus(struct pci_dev *dev, *bus_region, *resource) pcibios_bus_to_resource(struct pci_dev *dev, *resource, *bus_region) took a pci_dev, but they really depend only on the pci_bus. And we want to use them in resource allocation paths where we have the bus but not a device, so this patch converts them to take the pci_bus instead of the pci_dev: pcibios_resource_to_bus(struct pci_bus *bus, *bus_region, *resource) pcibios_bus_to_resource(struct pci_bus *bus, *resource, *bus_region) In fact, with standard PCI-PCI bridges, they only depend on the host bridge, because that's the only place address translation occurs, but we aren't going that far yet. [bhelgaas: changelog] Signed-off-by: Yinghai Lu Signed-off-by: Bjorn Helgaas

powerpc: Fix little endian issue in OF PCI scan

2013-10-30T05:01:04+00:00

This issue was causing the QEMU emulated USB device to fail dring PCI probe. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt