BMC/Intel-BMC/linux.git/arch/powerpc/include/asm/hvcall.h, branch dev

KVM: PPC: Book3S HV: Add H_SET_MODE hcall handling

2014-07-28T13:22:19+00:00

This adds support for the H_SET_MODE hcall. This hcall is a multiplexer that has several functions, some of which are called rarely, and some which are potentially called very frequently. Here we add support for the functions that set the debug registers CIABR (Completed Instruction Address Breakpoint Register) and DAWR/DAWRX (Data Address Watchpoint Register and eXtension), since they could be updated by the guest as often as every context switch. This also adds a kvmppc_power8_compatible() function to test to see if a guest is compatible with POWER8 or not. The CIABR and DAWR/X only exist on POWER8. Signed-off-by: Michael Neuling Signed-off-by: Paul Mackerras Signed-off-by: Alexander Graf

powerpc: Add hvcalls for 24x7 and gpci (Get Performance Counter Info)

2014-03-23T22:48:28+00:00

Signed-off-by: Cody P Schafer Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt

pseries: Add H_SET_MODE to change exception endianness

2013-11-20T22:19:16+00:00

On little endian builds call H_SET_MODE so exceptions have the correct endianness. We need to reset the endian during kexec so do that in the MMU hashtable clear callback. Signed-off-by: Anton Blanchard Signed-off-by: Benjamin Herrenschmidt

powerpc/kvm/book3s: Add support for H_IPOLL and H_XIRR_X in XICS emulation

2013-05-31T22:29:27+00:00

This adds the remaining two hypercalls defined by PAPR for manipulating the XICS interrupt controller, H_IPOLL and H_XIRR_X. H_IPOLL returns information about the priority and pending interrupts for a virtual cpu, without changing any state. H_XIRR_X is like H_XIRR in that it reads and acknowledges the highest-priority pending interrupt, but it also returns the timestamp (timebase register value) from when the interrupt was first received by the hypervisor. Currently we just return the current time, since we don't do any software queueing of virtual interrupts inside the XICS emulation code. These hcalls are not currently used by Linux guests, but may be in future. Signed-off-by: Paul Mackerras Acked-by: Scott Wood Signed-off-by: Benjamin Herrenschmidt

KVM: PPC: Book3S: Add infrastructure to implement kernel-side RTAS calls

2013-04-26T18:27:29+00:00

For pseries machine emulation, in order to move the interrupt controller code to the kernel, we need to intercept some RTAS calls in the kernel itself. This adds an infrastructure to allow in-kernel handlers to be registered for RTAS services by name. A new ioctl, KVM_PPC_RTAS_DEFINE_TOKEN, then allows userspace to associate token values with those service names. Then, when the guest requests an RTAS service with one of those token values, it will be handled by the relevant in-kernel handler rather than being passed up to userspace as at present. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras [agraf: fix warning] Signed-off-by: Alexander Graf

powerpc: Disable relocation on exceptions whenever PR KVM is active

2013-01-10T06:00:42+00:00

For PR KVM we allow userspace to map 0xc000000000000000. Because transitioning from userspace to the guest kernel may use the relocated exception vectors we have to disable relocation on exceptions whenever PR KVM is active as we cannot trust that address. This issue does not apply to HV KVM, since changing from a guest to the hypervisor will never use the relocated exception vectors. Currently the hypervisor interface only allows us to toggle relocation on exceptions on a partition wide scope, so we need to globally disable relocation on exceptions when the first PR KVM instance is started and only re-enable them when all PR KVM instances have been destroyed. It's a bit heavy handed, but until the hypervisor gives us a lightweight way to toggle relocation on exceptions on a single thread it's only real option. Signed-off-by: Ian Munsie Signed-off-by: Benjamin Herrenschmidt

powerpc: Move get_longbusy_msecs into hvcall.h and remove duplicate function

2012-11-15T04:08:07+00:00

I am going to use this in the next patch, better to have this code in one place rather than three. Signed-off-by: Ian Munsie Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt

powerpc: Add set_mode hcall

2012-11-15T04:08:06+00:00

This new hcall in POWER8 is used to set various resource mode registers. eg. it can set address translation mode on interrupt (note: partition wide scope) Signed-off-by: Ian Munsie Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt

powerpc: cleanup old DABRX #defines

2012-09-09T23:59:16+00:00

These are no longer used so get rid of them Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt

Merge branch 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2012-05-24T23:17:30+00:00

Pull KVM changes from Avi Kivity: "Changes include additional instruction emulation, page-crossing MMIO, faster dirty logging, preventing the watchdog from killing a stopped guest, module autoload, a new MSI ABI, and some minor optimizations and fixes. Outside x86 we have a small s390 and a very large ppc update. Regarding the new (for kvm) rebaseless workflow, some of the patches that were merged before we switch trees had to be rebased, while others are true pulls. In either case the signoffs should be correct now." Fix up trivial conflicts in Documentation/feature-removal-schedule.txt arch/powerpc/kvm/book3s_segment.S and arch/x86/include/asm/kvm_para.h. I suspect the kvm_para.h resolution ends up doing the "do I have cpuid" check effectively twice (it was done differently in two different commits), but better safe than sorry ;) * 'next' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (125 commits) KVM: make asm-generic/kvm_para.h have an ifdef __KERNEL__ block KVM: s390: onereg for timer related registers KVM: s390: epoch difference and TOD programmable field KVM: s390: KVM_GET/SET_ONEREG for s390 KVM: s390: add capability indicating COW support KVM: Fix mmu_reload() clash with nested vmx event injection KVM: MMU: Don't use RCU for lockless shadow walking KVM: VMX: Optimize %ds, %es reload KVM: VMX: Fix %ds/%es clobber KVM: x86 emulator: convert bsf/bsr instructions to emulate_2op_SrcV_nobyte() KVM: VMX: unlike vmcs on fail path KVM: PPC: Emulator: clean up SPR reads and writes KVM: PPC: Emulator: clean up instruction parsing kvm/powerpc: Add new ioctl to retreive server MMU infos kvm/book3s: Make kernel emulated H_PUT_TCE available for "PR" KVM KVM: PPC: bookehv: Fix r8/r13 storing in level exception handler KVM: PPC: Book3S: Enable IRQs during exit handling KVM: PPC: Fix PR KVM on POWER7 bare metal KVM: PPC: Fix stbux emulation KVM: PPC: bookehv: Use lwz/stw instead of PPC_LL/PPC_STL for 32-bit fields ...