BMC/Intel-BMC/linux.git/arch/mips, branch dev-4.19

MIPS: Remove function size check in get_frame_info()

2019-03-13T21:02:37+00:00

[ Upstream commit 2b424cfc69728224fcb5fad138ea7260728e0901 ] Patch (b6c7a324df37b "MIPS: Fix get_frame_info() handling of microMIPS function size.") introduces additional function size check for microMIPS by only checking insn between ip and ip + func_size. However, func_size in get_frame_info() is always 0 if KALLSYMS is not enabled. This causes get_frame_info() to return immediately without calculating correct frame_size, which in turn causes "Can't analyze schedule() prologue" warning messages at boot time. This patch removes func_size check, and let the frame_size check run up to 128 insns for both MIPS and microMIPS. Signed-off-by: Jun-Ru Chang Signed-off-by: Tony Wu Signed-off-by: Paul Burton Fixes: b6c7a324df37b ("MIPS: Fix get_frame_info() handling of microMIPS function size.") Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: Signed-off-by: Sasha Levin

DTS: CI20: Fix bugs in ci20's device tree.

2019-03-13T21:02:34+00:00

[ Upstream commit 1ca1c87f91d9dc50d6a38e2177b2032996e7901c ] According to the Schematic, the hardware of ci20 leads to uart3, but not to uart2. Uart2 is miswritten in the original code. Signed-off-by: Zhou Yanjie Signed-off-by: Paul Burton Cc: linux-mips Cc: linux-kernel Cc: devicetree@vger.kernel.org Cc: robh+dt@kernel.org Cc: ralf@linux-mips.org Cc: jhogan@kernel.org Cc: mark.rutland@arm.com Cc: malat@debian.org Cc: ezequiel@collabora.co.uk Cc: ulf.hansson@linaro.org Cc: syq Cc: jiaxun.yang Signed-off-by: Sasha Levin

MIPS: irq: Allocate accurate order pages for irq stack

2019-03-10T06:17:20+00:00

commit 72faa7a773ca59336f3c889e878de81445c5a85c upstream. The irq_pages is the number of pages for irq stack, but not the order which is needed by __get_free_pages(). We can use get_order() to calculate the accurate order. Signed-off-by: Liu Xiang Signed-off-by: Paul Burton Fixes: fe8bd18ffea5 ("MIPS: Introduce irq_stack") Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.11+ Signed-off-by: Greg Kroah-Hartman

MIPS: eBPF: Fix icache flush end address

2019-03-05T16:58:54+00:00

commit d1a2930d8a992fb6ac2529449f81a0056e1b98d1 upstream. The MIPS eBPF JIT calls flush_icache_range() in order to ensure the icache observes the code that we just wrote. Unfortunately it gets the end address calculation wrong due to some bad pointer arithmetic. The struct jit_ctx target field is of type pointer to u32, and as such adding one to it will increment the address being pointed to by 4 bytes. Therefore in order to find the address of the end of the code we simply need to add the number of 4 byte instructions emitted, but we mistakenly add the number of instructions multiplied by 4. This results in the call to flush_icache_range() operating on a memory region 4x larger than intended, which is always wasteful and can cause crashes if we overrun into an unmapped page. Fix this by correcting the pointer arithmetic to remove the bogus multiplication, and use braces to remove the need for a set of brackets whilst also making it obvious that the target field is a pointer. Signed-off-by: Paul Burton Fixes: b6bd53f9c4e8 ("MIPS: Add missing file for eBPF JIT.") Cc: Alexei Starovoitov Cc: Daniel Borkmann Cc: Martin KaFai Lau Cc: Song Liu Cc: Yonghong Song Cc: netdev@vger.kernel.org Cc: bpf@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Daniel Borkmann Signed-off-by: Greg Kroah-Hartman

MIPS: BCM63XX: provide DMA masks for ethernet devices

2019-03-05T16:58:54+00:00

commit 18836b48ebae20850631ee2916d0cdbb86df813d upstream. The switch to the generic dma ops made dma masks mandatory, breaking devices having them not set. In case of bcm63xx, it broke ethernet with the following warning when trying to up the device: [ 2.633123] ------------[ cut here ]------------ [ 2.637949] WARNING: CPU: 0 PID: 325 at ./include/linux/dma-mapping.h:516 bcm_enetsw_open+0x160/0xbbc [ 2.647423] Modules linked in: gpio_button_hotplug [ 2.652361] CPU: 0 PID: 325 Comm: ip Not tainted 4.19.16 #0 [ 2.658080] Stack : 80520000 804cd3ec 00000000 00000000 804ccc00 87085bdc 87d3f9d4 804f9a17 [ 2.666707] 8049cf18 00000145 80a942a0 00000204 80ac0000 10008400 87085b90 eb3d5ab7 [ 2.675325] 00000000 00000000 80ac0000 000022b0 00000000 00000000 00000007 00000000 [ 2.683954] 0000007a 80500000 0013b381 00000000 80000000 00000000 804a1664 80289878 [ 2.692572] 00000009 00000204 80ac0000 00000200 00000002 00000000 00000000 80a90000 [ 2.701191] ... [ 2.703701] Call Trace: [ 2.706244] [<8001f3c8>] show_stack+0x58/0x100 [ 2.710840] [<800336e4>] __warn+0xe4/0x118 [ 2.715049] [<800337d4>] warn_slowpath_null+0x48/0x64 [ 2.720237] [<80289878>] bcm_enetsw_open+0x160/0xbbc [ 2.725347] [<802d1d4c>] __dev_open+0xf8/0x16c [ 2.729913] [<802d20cc>] __dev_change_flags+0x100/0x1c4 [ 2.735290] [<802d21b8>] dev_change_flags+0x28/0x70 [ 2.740326] [<803539e0>] devinet_ioctl+0x310/0x7b0 [ 2.745250] [<80355fd8>] inet_ioctl+0x1f8/0x224 [ 2.749939] [<802af290>] sock_ioctl+0x30c/0x488 [ 2.754632] [<80112b34>] do_vfs_ioctl+0x740/0x7dc [ 2.759459] [<80112c20>] ksys_ioctl+0x50/0x94 [ 2.763955] [<800240b8>] syscall_common+0x34/0x58 [ 2.768782] ---[ end trace fb1a6b14d74e28b6 ]--- [ 2.773544] bcm63xx_enetsw bcm63xx_enetsw.0: cannot allocate rx ring 512 Fix this by adding appropriate DMA masks for the platform devices. Fixes: f8c55dc6e828 ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms") Signed-off-by: Jonas Gorski Reviewed-by: Christoph Hellwig Reviewed-by: Florian Fainelli Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Ralf Baechle Cc: James Hogan Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Greg Kroah-Hartman

MIPS: fix truncation in __cmpxchg_small for short values

2019-03-05T16:58:53+00:00

commit 94ee12b507db8b5876e31c9d6c9d84f556a4b49f upstream. __cmpxchg_small erroneously uses u8 for load comparison which can be either char or short. This patch changes the local variable to u32 which is sufficiently sized, as the loaded value is already masked and shifted appropriately. Using an integer size avoids any unnecessary canonicalization from use of non native widths. This patch is part of a series that adapts the MIPS small word atomics code for xchg and cmpxchg on short and char to RISC-V. Cc: RISC-V Patches Cc: Linux RISC-V Cc: Linux MIPS Signed-off-by: Michael Clark [paul.burton@mips.com: - Fix varialble typo per Jonas Gorski. - Consolidate load variable with other declarations.] Signed-off-by: Paul Burton Fixes: 3ba7f44d2b19 ("MIPS: cmpxchg: Implement 1 byte & 2 byte cmpxchg()") Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Greg Kroah-Hartman

MIPS: jazz: fix 64bit build

2019-02-27T09:08:53+00:00

[ Upstream commit 41af167fbc0032f9d7562854f58114eaa9270336 ] 64bit JAZZ builds failed with linux-next/arch/mips/jazz/jazzdma.c: In function `vdma_init`: /linux-next/arch/mips/jazz/jazzdma.c:77:30: error: implicit declaration of function `KSEG1ADDR`; did you mean `CKSEG1ADDR`? [-Werror=implicit-function-declaration] pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl); ^~~~~~~~~ CKSEG1ADDR /linux-next/arch/mips/jazz/jazzdma.c:77:10: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl); ^ In file included from /linux-next/arch/mips/include/asm/barrier.h:11:0, from /linux-next/include/linux/compiler.h:248, from /linux-next/include/linux/kernel.h:10, from /linux-next/arch/mips/jazz/jazzdma.c:11: /linux-next/arch/mips/include/asm/addrspace.h:41:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] #define _ACAST32_ (_ATYPE_)(_ATYPE32_) /* widen if necessary */ ^ /linux-next/arch/mips/include/asm/addrspace.h:53:25: note: in expansion of macro `_ACAST32_` #define CPHYSADDR(a) ((_ACAST32_(a)) & 0x1fffffff) ^~~~~~~~~ /linux-next/arch/mips/jazz/jazzdma.c:84:44: note: in expansion of macro `CPHYSADDR` r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, CPHYSADDR(pgtbl)); Using correct casts and CKSEG1ADDR when dealing with the pgtbl setup fixes this. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sasha Levin

MIPS: ath79: Enable OF serial ports in the default config

2019-02-27T09:08:53+00:00

[ Upstream commit 565dc8a4f55e491935bfb04866068d21784ea9a4 ] CONFIG_SERIAL_OF_PLATFORM is needed to get a working console on the OF boards, enable it in the default config to get a working setup out of the box. Signed-off-by: Alban Bedel Signed-off-by: Paul Burton Cc: linux-mips@vger.kernel.org Cc: Ralf Baechle Cc: James Hogan Cc: linux-kernel@vger.kernel.org Signed-off-by: Sasha Levin

MIPS: eBPF: Always return sign extended 32b values

2019-02-27T09:08:49+00:00

commit 13443154f6cac61d148471ede6d7f1f6b5ea946a upstream. The function prototype used to call JITed eBPF code (ie. the type of the struct bpf_prog bpf_func field) returns an unsigned int. The MIPS n64 ABI that MIPS64 kernels target defines that 32 bit integers should always be sign extended when passed in registers as either arguments or return values. This means that when returning any value which may not already be sign extended (ie. of type REG_64BIT or REG_32BIT_ZERO_EX) we need to perform that sign extension in order to comply with the n64 ABI. Without this we see strange looking test failures from test_bpf.ko, such as: test_bpf: #65 ALU64_MOV_X: dst = 4294967295 jited:1 ret -1 != -1 FAIL (1 times) Although the return value printed matches the expected value, this is only because printf is only examining the least significant 32 bits of the 64 bit register value we returned. The register holding the expected value is sign extended whilst the v0 register was set to a zero extended value by our JITed code, so when compared by a conditional branch instruction the values are not equal. We already handle this when the return value register is of type REG_32BIT_ZERO_EX, so simply extend this to also cover REG_64BIT. Signed-off-by: Paul Burton Fixes: b6bd53f9c4e8 ("MIPS: Add missing file for eBPF JIT.") Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Daniel Borkmann Signed-off-by: Greg Kroah-Hartman

MIPS: VDSO: Include $(ccflags-vdso) in o32,n32 .lds builds

2019-02-15T07:10:12+00:00

commit 67fc5dc8a541e8f458d7f08bf88ff55933bf9f9d upstream. When generating vdso-o32.lds & vdso-n32.lds for use with programs running as compat ABIs under 64b kernels, we previously haven't included the compiler flags that are supposedly common to all ABIs - ie. those in the ccflags-vdso variable. This is problematic in cases where we need to provide the -m%-float flag in order to ensure that we don't attempt to use a floating point ABI that's incompatible with the target CPU & ABI. For example a toolchain using current gcc trunk configured --with-fp-32=xx fails to build a 64r6el_defconfig kernel with the following error: cc1: error: '-march=mips1' requires '-mfp32' make[2]: *** [arch/mips/vdso/Makefile:135: arch/mips/vdso/vdso-o32.lds] Error 1 Include $(ccflags-vdso) for the compat VDSO .lds builds, just as it is included for the native VDSO .lds & when compiling objects for the compat VDSOs. This ensures we consistently provide the -msoft-float flag amongst others, avoiding the problem by ensuring we're agnostic to the toolchain defaults. Signed-off-by: Paul Burton Fixes: ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") Cc: linux-mips@vger.kernel.org Cc: Kevin Hilman Cc: Guenter Roeck Cc: Maciej W . Rozycki Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: Greg Kroah-Hartman