BMC/Intel-BMC/linux.git/arch/mips/kernel/ptrace.c, branch dev-4.6

MIPS: ptrace: Prevent writes to read-only FCSR bits

2016-06-08T01:23:34+00:00

commit abf378be49f38c4d3e23581d3df3fa9f1b1b11d2 upstream. Correct the cases missed with commit 9b26616c8d9d ("MIPS: Respect the ISA level in FCSR handling") and prevent writes to read-only FCSR bits there. This in particular applies to FP context initialisation where any IEEE 754-2008 bits preset by `mips_set_personality_nan' are cleared before the relevant ptrace(2) call takes effect and the PTRACE_POKEUSR request addressing FPC_CSR where no masking of read-only FCSR bits is done. Remove the FCSR clearing from FP context initialisation then and unify PTRACE_POKEUSR/FPC_CSR and PTRACE_SETFPREGS handling, by factoring out code from `ptrace_setfpregs' and calling it from both places. This mostly matters to soft float configurations where the emulator can be switched this way to a mode which should not be accessible and cannot be set with the CTC1 instruction. With hard float configurations any effect is transient anyway as read-only bits will retain their values at the time the FP context is restored. Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13239/ Signed-off-by: Ralf Baechle Signed-off-by: Greg Kroah-Hartman

MIPS: ptrace: Fix FP context restoration FCSR regression

2016-06-08T01:23:34+00:00

commit 4249548454f7ba4581aeee26bd83f42b48a14d15 upstream. Fix a floating-point context restoration regression introduced with commit 9b26616c8d9d ("MIPS: Respect the ISA level in FCSR handling") that causes a Floating Point exception and consequently a kernel oops with hard float configurations when one or more FCSR Enable and their corresponding Cause bits are set both at a time via a ptrace(2) call. To do so reinstate Cause bit masking originally introduced with commit b1442d39fac2 ("MIPS: Prevent user from setting FCSR cause bits") to address this exact problem and then inadvertently removed from the PTRACE_SETFPREGS request with the commit referred above. Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13238/ Signed-off-by: Ralf Baechle Signed-off-by: Greg Kroah-Hartman

MIPS: ptrace: Drop cp0_tcstatus from regoffset_table[]

2016-01-24T01:24:24+00:00

The cp0_tcstatus member of struct pt_regs was removed along with the rest of SMTC in v3.16, commit b633648c5ad3 ("MIPS: MT: Remove SMTC support"), however recent uprobes support in v4.3 added back a reference to it in the regoffset_table[] in ptrace.c. Remove it. Signed-off-by: James Hogan Fixes: 40e084a506eb ("MIPS: Add uprobes support.") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11920/ Signed-off-by: Ralf Baechle

MIPS: Add uprobes support.

2015-09-03T10:08:05+00:00

Signed-off-by: Ralf Baechle

MIPS: Fix a preemption issue with thread's FPU defaults

2015-05-12T21:15:49+00:00

Fix "BUG: using smp_processor_id() in preemptible" reported in accesses to thread's FPU defaults: the value to initialise FSCR to at program startup, the FCSR r/w mask and the contents of FIR in full FPU emulation, removing a regression introduced with 9b26616c [MIPS: Respect the ISA level in FCSR handling] and f6843626 [MIPS: math-emu: Set FIR feature flags for full emulation]. Use `boot_cpu_data' to obtain the data from, following the approach that `cpu_has_*' macros take and avoiding the call to `smp_processor_id' made in the reference to `current_cpu_data'. The contents of FSCR have to be consistent across processors in an SMP system, the settings there must not change as a thread is migrated across processors. And the contents of FIR are guaranteed to be consistent in FPU emulation, by definition. Signed-off-by: Maciej W. Rozycki Tested-by: Ezequiel Garcia Tested-by: Paul Martin Cc: Markos Chandras Cc: James Hogan Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10030/ Signed-off-by: Ralf Baechle

Merge branch '4.1-fp' into mips-for-linux-next

2015-04-13T14:01:37+00:00

MIPS: Respect the ISA level in FCSR handling

2015-04-07T23:10:37+00:00

Define the central place the default FCSR value is set from, initialised in `cpu_probe'. Determine the FCSR mask applied to values written to the register with CTC1 in the full emulation mode and via ptrace(2), according to the ISA level of processor hardware or the writability of bits 31:18 if actual FPU hardware is used. Software may rely on FCSR bits whose functions our emulator does not implement, so it should not allow them to be set or software may get confused. For ptrace(2) it's just sanity. [ralf@linux-mips.org: Fixed double inclusion of .] Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9711/ Signed-off-by: Ralf Baechle

MIPS: prevent FP context set via ptrace being discarded

2015-03-27T18:42:47+00:00

If a ptracee has not used the FPU and the ptracer sets its FP context using PTRACE_POKEUSR, PTRACE_SETFPREGS or PTRACE_SETREGSET then that context will be discarded upon either the ptracee using the FPU or a further write to the context via ptrace. Prevent this loss by recording that the task has "used" math once its FP context has been written to. The context initialisation code that was present for the PTRACE_POKEUSR case is reused for the other 2 cases to provide consistent behaviour for the different ptrace requests. Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9166/ Signed-off-by: Ralf Baechle

MIPS: Fix syscall_get_nr for the syscall exit tracing.

2015-02-04T15:40:09+00:00

Register 2 is alredy overwritten by the return value when syscall_trace_leave() is called. Signed-off-by: Lars Persson Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9187/ Signed-off-by: Ralf Baechle

Merge git://git.infradead.org/users/eparis/audit

2014-10-19T23:25:56+00:00

Pull audit updates from Eric Paris: "So this change across a whole bunch of arches really solves one basic problem. We want to audit when seccomp is killing a process. seccomp hooks in before the audit syscall entry code. audit_syscall_entry took as an argument the arch of the given syscall. Since the arch is part of what makes a syscall number meaningful it's an important part of the record, but it isn't available when seccomp shoots the syscall... For most arch's we have a better way to get the arch (syscall_get_arch) So the solution was two fold: Implement syscall_get_arch() everywhere there is audit which didn't have it. Use syscall_get_arch() in the seccomp audit code. Having syscall_get_arch() everywhere meant it was a useless flag on the stack and we could get rid of it for the typical syscall entry. The other changes inside the audit system aren't grand, fixed some records that had invalid spaces. Better locking around the task comm field. Removing some dead functions and structs. Make some things static. Really minor stuff" * git://git.infradead.org/users/eparis/audit: (31 commits) audit: rename audit_log_remove_rule to disambiguate for trees audit: cull redundancy in audit_rule_change audit: WARN if audit_rule_change called illegally audit: put rule existence check in canonical order next: openrisc: Fix build audit: get comm using lock to avoid race in string printing audit: remove open_arg() function that is never used audit: correct AUDIT_GET_FEATURE return message type audit: set nlmsg_len for multicast messages. audit: use union for audit_field values since they are mutually exclusive audit: invalid op= values for rules audit: use atomic_t to simplify audit_serial() kernel/audit.c: use ARRAY_SIZE instead of sizeof/sizeof[0] audit: reduce scope of audit_log_fcaps audit: reduce scope of audit_net_id audit: arm64: Remove the audit arch argument to audit_syscall_entry arm64: audit: Add audit hook in syscall_trace_enter/exit() audit: x86: drop arch from __audit_syscall_entry() interface sparc: implement is_32bit_task sparc: properly conditionalize use of TIF_32BIT ...