BMC/Intel-BMC/linux.git/arch/mips/include/asm/mipsregs.h, branch dev

MIPS: R12000: Enable branch prediction global history

2015-06-21T19:54:13+00:00

The R12000 added a new feature to enhance branch prediction called "global history". Per the Vr10000 Series User Manual (U10278EJ4V0UM), Coprocessor 0, Diagnostic Register (22): """ If bit 26 is set, branch prediction uses all eight bits of the global history register. If bit 26 is not set, then bits 25:23 specify a count of the number of bits of global history to be used. Thus if bits 26:23 are all zero, global history is disabled. The global history contains a record of the taken/not-taken status of recently executed branches, and when used is XOR'ed with the PC of a branch being predicted to produce a hashed value for indexing the BPT. Some programs with small "working set of conditional branches" benefit significantly from the use of such hashing, some see slight performance degradation. """ This patch enables global history on R12000 CPUs and up by setting bit 26 in the branch prediction diagnostic register (CP0 $22) to '1'. Bits 25:23 are left alone so that all eight bits of the global history register are available for branch prediction. Signed-off-by: Joshua Kinard Signed-off-by: Ralf Baechle

MIPS: mipsregs.h: Add EntryLo bit definitions

2015-06-21T19:52:31+00:00

Add definitions for EntryLo register bits in mipsregs.h. The R4000 compatible ones are prefixed MIPS_ENTRYLO_ and the R3000 compatible ones are prefixed R3K_ENTRYLO_. These will be used in later patches. Signed-off-by: James Hogan Cc: linux-mips@linux-mips.org Cc: Maciej W. Rozycki Patchwork: https://patchwork.linux-mips.org/patch/10073/ Signed-off-by: Ralf Baechle

MIPS: math-emu: Define IEEE 754-2008 feature control bits

2015-04-07T23:10:31+00:00

Define IEEE 754-2008 feature control bits: FIR.HAS2008, FCSR.ABS2008 and FCSR.NAN2008, and update the `_ieee754_csr' structure accordingly. For completeness define FIR.UFRP too. Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9709/ Signed-off-by: Ralf Baechle

MIPS: math-emu: Implement the FCCR, FEXR and FENR registers

2015-04-07T23:10:28+00:00

Implement the FCCR, FEXR and FENR "shadow" FPU registers for the architecture levels that include them, for the CFC1 and CTC1 instructions in the full emulation mode. For completeness add macros for the CP1 UFR and UNFR registers too, no actual implementation though. Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9708/ Signed-off-by: Ralf Baechle

MIPS: mipsregs.h: Reindent CP0 Cause macros

2015-04-07T23:08:39+00:00

Reindent CP0 Cause macros for a single space after #define, leaving extra indentation for individual Interrupt Pending bits as with CP0 Status register's Interrupt Mask bits. [ralf@linux-mips.org: Fix conflict.] [ralf@linux-mips.org: Fix indentation of the CAUSEB_FDCI and CAUSEF_FDCI definitions.] Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9669/ Signed-off-by: Ralf Baechle

MIPS: mipsregs.h: Move TX39 macros out of the way

2015-04-07T23:08:36+00:00

TX39 CP0 Configuration Register 3 macro definitions have been randomly thrown in the middle of a block of CP0 Status register value macros. Move them to the end of the whole CP0 register value macro block, complementing the location of the TX39 Cache register name macro at the end of the CP0 register name macro block. [ralf@linux-mips.org: Fix conflict.] Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9668/ Signed-off-by: Ralf Baechle

MIPS: mipsregs.h: Reorder CP1 macro definitions

2015-04-07T23:08:34+00:00

Originally CP1 macros were placed between CP0 register name macros and CP0 register value macros. As changes were applied to the header the position of CP1 macros gradually has become more and more arbitrary and two separate blocks were created. This may only cause confusion. Move them out of the way then and place together after all the CP0 macros. No semantic change. [ralf@linux-mips.org: Fix conflict.] Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9667/ Signed-off-by: Ralf Baechle

MIPS: mipsregs.h: Remove broken comments

2015-04-07T23:08:30+00:00

Remove a duplicate FPU Status Register reference that has been there since forever and a mistakenly copied and pasted R4xx0 manual reference. [ralf@linux-mips.org: Fix conflict.] Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9666/ Signed-off-by: Ralf Baechle

MIPS: Add architectural FDC IRQ fields

2015-03-31T10:04:12+00:00

Add architectural field definitions relating to the Fast Debug Channel (FDC) interrupt, namely the pending bit in Cause and the field in IntCtl to specify which CPU IRQ line the FDC interrupt is routed to. Signed-off-by: James Hogan Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan Patchwork: https://patchwork.linux-mips.org/patch/9139/ Signed-off-by: Ralf Baechle

MIPS: Add arch CDMM definitions and probing

2015-03-31T10:04:12+00:00

Add architectural definitions and probing for the MIPS Common Device Memory Map (CDMM) region. When supported and enabled at a particular physical address, this region allows some number of per-CPU devices to be discovered and controlled via MMIO. A bit exists in Config3 to determine whether the feature is present, and a CDMMBase CP0 register allows the region to be enabled at a particular physical address. [ralf@linux-mips.org: Sort conflict with other patches.] Signed-off-by: James Hogan Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9178/ Signed-off-by: Ralf Baechle