BMC/Intel-BMC/linux.git/arch/mips/include/asm/kvm_host.h, branch dev

KVM: add memslots argument to kvm_arch_memslots_updated

2015-05-26T10:40:17+00:00

Prepare for the case of multiple address spaces. Reviewed-by: Radim Krcmar Signed-off-by: Paolo Bonzini

MIPS: KVM: Add MSA exception handling

2015-03-27T21:25:20+00:00

Add guest exception handling for MIPS SIMD Architecture (MSA) floating point exceptions and MSA disabled exceptions. MSA floating point exceptions from the guest need passing to the guest kernel, so for these a guest MSAFPE is emulated. MSA disabled exceptions are normally handled by passing a reserved instruction exception to the guest (because no guest MSA was supported), but the hypervisor can now handle them if the guest has MSA by passing an MSA disabled exception to the guest, or if the guest has MSA enabled by transparently restoring the guest MSA context and enabling MSA and the FPU. Signed-off-by: James Hogan Cc: Paolo Bonzini Cc: Paul Burton Cc: Ralf Baechle Cc: Gleb Natapov Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org

MIPS: KVM: Add base guest MSA support

2015-03-27T21:25:19+00:00

Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan Cc: Paolo Bonzini Cc: Paul Burton Cc: Ralf Baechle Cc: Gleb Natapov Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org

MIPS: KVM: Add FP exception handling

2015-03-27T21:25:16+00:00

Add guest exception handling for floating point exceptions and coprocessor 1 unusable exceptions. Floating point exceptions from the guest need passing to the guest kernel, so for these a guest FPE is emulated. Also, coprocessor 1 unusable exceptions are normally passed straight through to the guest (because no guest FPU was supported), but the hypervisor can now handle them if the guest has its FPU enabled by restoring the guest FPU context and enabling the FPU. Signed-off-by: James Hogan Cc: Paolo Bonzini Cc: Paul Burton Cc: Ralf Baechle Cc: Gleb Natapov Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org

MIPS: KVM: Add base guest FPU support

2015-03-27T21:25:14+00:00

Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan Cc: Paolo Bonzini Cc: Paul Burton Cc: Ralf Baechle Cc: Gleb Natapov Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org

MIPS: KVM: Add vcpu_get_regs/vcpu_set_regs callback

2015-03-27T21:25:13+00:00

Add a vcpu_get_regs() and vcpu_set_regs() callbacks for loading and restoring context which may be in hardware registers. This may include floating point and MIPS SIMD Architecture (MSA) state which may be accessed directly by the guest (but restored lazily by the hypervisor), and also dedicated guest registers as provided by the VZ ASE. Signed-off-by: James Hogan Cc: Ralf Baechle Cc: Paolo Bonzini Cc: Gleb Natapov Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org

MIPS: KVM: Add Config4/5 and writing of Config registers

2015-03-27T21:25:12+00:00

Add Config4 and Config5 co-processor 0 registers, and add capability to write the Config1, Config3, Config4, and Config5 registers using the KVM API. Only supported bits can be written, to minimise the chances of the guest being given a configuration from e.g. QEMU that is inconsistent with that being emulated, and as such the handling is in trap_emul.c as it may need to be different for VZ. Currently the only modification permitted is to make Config4 and Config5 exist via the M bits, but other bits will be added for FPU and MSA support in future patches. Care should be taken by userland not to change bits without fully handling the possible extra state that may then exist and which the guest may begin to use and depend on. Signed-off-by: James Hogan Cc: Paolo Bonzini Cc: Ralf Baechle Cc: Gleb Natapov Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org

MIPS: KVM: Simplify default guest Config registers

2015-03-27T21:25:11+00:00

Various semi-used definitions exist in kvm_host.h for the default guest config registers. Remove them and use the appropriate values directly when initialising the Config registers. Signed-off-by: James Hogan Cc: Paolo Bonzini Cc: Ralf Baechle Cc: Gleb Natapov Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org

MIPS: KVM: Clean up register definitions a little

2015-03-27T21:25:10+00:00

Clean up KVM_GET_ONE_REG / KVM_SET_ONE_REG register definitions for MIPS, to prepare for adding a new group for FPU & MSA vector registers. Definitions are added for common bits in each group of registers, e.g. KVM_REG_MIPS_CP0 = KVM_REG_MIPS | 0x10000, for the coprocessor 0 registers. Signed-off-by: James Hogan Cc: Paolo Bonzini Cc: Ralf Baechle Cc: Gleb Natapov Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org

MIPS: KVM: Implement PRid CP0 register access

2015-03-27T21:25:08+00:00

Implement access to the guest Processor Identification CP0 register using the KVM_GET_ONE_REG and KVM_SET_ONE_REG ioctls. This allows the owning process to modify and read back the value that is exposed to the guest in this register. Signed-off-by: James Hogan Cc: Paolo Bonzini Cc: Ralf Baechle Cc: Gleb Natapov Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org