Intel OpenBMC Linux kernel source tree (mirror) https://git.radix-linux.su/BMC/Intel-BMC/linux.git/atom?h=dev-5.2 2019-05-16T23:16:18+00:00 2019-05-16T23:16:18+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-05-16T23:16:18+00:00 urn:sha1:2c45e7fbc962be1b03f2c2af817a76f5ba810af2 Pull thermal management updates from Zhang Rui: - Remove the 'module' Kconfig option for thermal subsystem framework because the thermal framework are required to be ready as early as possible to avoid overheat at boot time (Daniel Lezcano) - Fix a bug that thermal framework pokes disabled thermal zones upon resume (Wei Wang) - A couple of cleanups and trivial fixes on int340x thermal drivers (Srinivas Pandruvada, Zhang Rui, Sumeet Pawnikar) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: drivers: thermal: processor_thermal: Downgrade error message mlxsw: Remove obsolete dependency on THERMAL=m hwmon/drivers/core: Simplify complex dependency thermal/drivers/core: Fix typo in the option name thermal/drivers/core: Remove depends on THERMAL in Kconfig thermal/drivers/core: Remove module unload code thermal/drivers/core: Remove the module Kconfig's option thermal: core: skip update disabled thermal zones after suspend thermal: make device_register's type argument const thermal: intel: int340x: processor_thermal_device: simplify to get driver data thermal/int3403_thermal: favor _TMP instead of PTYP 2019-05-12T21:57:52+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-05-12T21:57:52+00:00 urn:sha1:4dbf09fea60d158e60a30c419e0cfa1ea138dd57 Pull MTD updates from Richard Weinberger: "MTD core changes: - New AFS partition parser - Update MAINTAINERS entry - Use of fall-throughs markers NAND core changes: - Support having the bad block markers in either the first, second or last page of a block. The combination of all three location is now possible. - Constification of NAND_OP_PARSER(_PATTERN) elements. - Generic NAND DT bindings changed to yaml format (can be used to check the proposed bindings. First platform to be fully supported: sunxi. - Stopped using several legacy hooks. - Preparation to use the generic NAND layer with the addition of several helpers and the removal of the struct nand_chip from generic functions. - Kconfig cleanup to prepare the introduction of external ECC engines support. - Fallthrough comments. - Introduction of the SPI-mem dirmap API for SPI-NAND devices. Raw NAND controller drivers changes: - nandsim: - Switch to ->exec-op(). - meson: - Misc cleanups and fixes. - New OOB layout. - Sunxi: - A23/A33 NAND DMA support. - Ingenic: - Full reorganization and cleanup. - Clear separation between NAND controller and ECC engine. - Support JZ4740 an JZ4725B. - Denali: - Clear controller/chip separation. - ->exec_op() migration. - Various cleanups. - fsl_elbc: - Enable software ECC support. - Atmel: - Sam9x60 support. - GPMI: - Introduce the GPMI_IS_MXS() macro. - Various trivial/spelling/coding style fixes. SPI NOR core changes: - Print all JEDEC ID bytes on error - Fix comment of spi_nor_find_best_erase_type() - Add region locking flags for s25fl512s SPI NOR controller drivers changes: - intel-spi: - Avoid crossing 4K address boundary on read/write - Add support for Intel Comet Lake SPI serial flash" * tag 'mtd/for-5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (120 commits) mtd: part: fix incorrect format specifier for an unsigned long long mtd: lpddr_cmds: Mark expected switch fall-through mtd: phram: Mark expected switch fall-throughs mtd: cfi_cmdset_0002: Mark expected switch fall-throughs mtd: cfi_util: mark expected switch fall-throughs MAINTAINERS: MTD Git repository is hosted on kernel.org MAINTAINERS: Update jffs2 entry mtd: afs: add v2 partition parsing mtd: afs: factor the IIS read into partition parser mtd: afs: factor footer parsing into the v1 part parsing mtd: factor out v1 partition parsing mtd: afs: simplify partition detection mtd: afs: simplify partition parsing mtd: partitions: Add OF support to AFS partitions mtd: partitions: Add AFS partitions DT bindings mtd: afs: Move AFS partition parser to parsers subdir mtd: maps: Make uclinux_ram_map static mtd: maps: Allow MTD_PHYSMAP with MTD_RAM MAINTAINERS: Add myself as MTD maintainer MAINTAINERS: Remove my name from the MTD and NAND entries ... 2019-05-08T23:41:47+00:00 Linus Torvalds torvalds@linux-foundation.org 2019-05-08T23:41:47+00:00 urn:sha1:92fab77b6b309dc219b02da4a69ad5dc76f7ec74 Pull MIPS updates from Paul Burton: - A set of memblock initialization improvements thanks to Serge Semin, tidying up after our conversion from bootmem to memblock back in v4.20. - Our eBPF JIT the previously supported only MIPS64r2 through MIPS64r5 is improved to also support MIPS64r6. Support for MIPS32 systems is introduced, with the caveat that it only works for programs that don't use 64 bit registers or operations - those will bail out & need to be interpreted. - Improvements to the allocation & configuration of our exception vector that should fix issues seen on some platforms using recent versions of U-Boot. - Some minor improvements to code generated for jump labels, along with enabling them by default for generic kernels. * tag 'mips_5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (27 commits) mips: Manually call fdt_init_reserved_mem() method mips: Make sure dt memory regions are valid mips: Perform early low memory test mips: Dump memblock regions for debugging mips: Add reserve-nomap memory type support mips: Use memblock to reserve the __nosave memory range mips: Discard post-CMA-init foreach loop mips: Reserve memory for the kernel image resources MIPS: Remove duplicate EBase configuration MIPS: Sync icache for whole exception vector MIPS: Always allocate exception vector for MIPSr2+ MIPS: Use memblock_phys_alloc() for exception vector mips: Combine memblock init and memory reservation loops mips: Discard rudiments from bootmem_init mips: Make sure kernel .bss exists in boot mem pool mips: vdso: drop unnecessary cc-ldoption Revert "MIPS: ralink: fix cpu clock of mt7621 and add dt clk devices" MIPS: generic: Enable CONFIG_JUMP_LABEL MIPS: jump_label: Use compact branches for >= r6 MIPS: jump_label: Remove redundant nops ... 2019-05-06T12:35:24+00:00 Daniel Lezcano daniel.lezcano@linaro.org 2019-04-02T16:12:44+00:00 urn:sha1:554b3529fe018e74cb5d0d0f476ee793b58b030a The module support for the thermal subsystem makes little sense: - some subsystems relying on it are not modules, thus forcing the framework to be compiled in - it is compiled in for almost every configs, the remaining ones are a few platforms where I don't see why we can not switch the thermal to 'y'. The drivers can stay in tristate. - platforms need the thermal to be ready as soon as possible at boot time in order to mitigate Usually the subsystems framework are compiled-in and the plugs are as module. Remove the module option. The removal of the module related dead code will come after this patch gets in or is acked. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Guenter Roeck <groeck@chromium.org> For mini2440: Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Paul Burton <paul.burton@mips.com> # MIPS part Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Zhang Rui <rui.zhang@intel.com> 2019-05-05T09:54:11+00:00 Richard Weinberger richard@nod.at 2019-05-05T09:54:11+00:00 urn:sha1:1c7cbd634763a0f0727d425c38486f0a3a9339a7 NAND core changes: - Support having the bad block markers in either the first, second or last page of a block. The combination of all three location is now possible. - Constification of NAND_OP_PARSER(_PATTERN) elements. - Generic NAND DT bindings changed to yaml format (can be used to check the proposed bindings. First platform to be fully supported: sunxi. - Stopped using several legacy hooks. - Preparation to use the generic NAND layer with the addition of several helpers and the removal of the struct nand_chip from generic functions. - Kconfig cleanup to prepare the introduction of external ECC engines support. - Fallthrough comments. - Introduction of the SPI-mem dirmap API for SPI-NAND devices. Raw NAND controller drivers changes: - nandsim: * Switch to ->exec-op(). - meson: * Misc cleanups and fixes. * New OOB layout. - Sunxi: * A23/A33 NAND DMA support. - Ingenic: * Full reorganization and cleanup. * Clear separation between NAND controller and ECC engine. * Support JZ4740 an JZ4725B. - Denali: * Clear controller/chip separation. * ->exec_op() migration. * Various cleanups. - fsl_elbc: * Enable software ECC support. - Atmel: * Sam9x60 support. - GPMI: * Introduce the GPMI_IS_MXS() macro. - Various trivial/spelling/coding style fixes. 2019-04-22T15:47:36+00:00 Jens Axboe axboe@kernel.dk 2019-04-22T15:47:36+00:00 urn:sha1:5c61ee2cd5860e41c8ab98837761ffaa93eb4dfe Pull in v5.1-rc6 to resolve two conflicts. One is in BFQ, in just a comment, and is trivial. The other one is a conflict due to a later fix in the bio multi-page work, and needs a bit more care. * tag 'v5.1-rc6': (770 commits) Linux 5.1-rc6 block: make sure that bvec length can't be overflow block: kill all_q_node in request_queue x86/cpu/intel: Lower the "ENERGY_PERF_BIAS: Set to normal" message's log priority coredump: fix race condition between mmget_not_zero()/get_task_mm() and core dumping mm/kmemleak.c: fix unused-function warning init: initialize jump labels before command line option parsing kernel/watchdog_hld.c: hard lockup message should end with a newline kcov: improve CONFIG_ARCH_HAS_KCOV help text mm: fix inactive list balancing between NUMA nodes and cgroups mm/hotplug: treat CMA pages as unmovable proc: fixup proc-pid-vm test proc: fix map_files test on F29 mm/vmstat.c: fix /proc/vmstat format for CONFIG_DEBUG_TLBFLUSH=y CONFIG_SMP=n mm/memory_hotplug: do not unlock after failing to take the device_hotplug_lock mm: swapoff: shmem_unuse() stop eviction without igrab() mm: swapoff: take notice of completion sooner mm: swapoff: remove too limiting SWAP_UNUSE_MAX_TRIES mm: swapoff: shmem_find_swap_entries() filter out other types slab: store tagged freelist for off-slab slabmgmt ... Signed-off-by: Jens Axboe <axboe@kernel.dk> 2019-04-18T06:54:00+00:00 Miquel Raynal miquel.raynal@bootlin.com 2019-02-06T15:47:44+00:00 urn:sha1:72c5af00272339af6bbed6fe7275cd731f57be2d MTD_NAND is large and encloses much more than what the symbol is actually used for: raw NAND. Clarify the symbol by naming it MTD_RAW_NAND instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> 2019-04-18T06:54:00+00:00 Miquel Raynal miquel.raynal@bootlin.com 2019-02-08T07:48:37+00:00 urn:sha1:9bb94643b94115990ffec18c8129f1ab970765c1 The software Hamming ECC correction implementation is referred as MTD_NAND_ECC which is too generic. Rename it MTD_NAND_ECC_SW_HAMMING. Also rename MTD_NAND_ECC_SMC which is an SMC quirk in the Hamming implementation as MTD_NAND_ECC_SW_HAMMING_SMC. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> 2019-04-18T06:54:00+00:00 Miquel Raynal miquel.raynal@bootlin.com 2019-02-06T14:12:27+00:00 urn:sha1:714c068228d3275da6d36f29e544f7e5ae648849 There is no point in having two distinct entries, merge them and rename the symbol for more clarity: MTD_NAND_ECC_SW_BCH Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> 2019-04-09T23:21:32+00:00 Paul Burton paul.burton@mips.com 2019-04-05T22:50:37+00:00 urn:sha1:3e3d1dfda4d6a17666fe0beae5c56b97b42e2c7a Enable CONFIG_JUMP_LABEL for generic configs in order to better optimize at runtime and get better test coverage for our jump label support. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: linux-mips@vger.kernel.org