BMC/Intel-BMC/linux.git/arch/mips/bcm63xx/clk.c, branch dev

MIPS: BCM63XX: setup the HSSPI clock rate

2014-01-22T19:18:49+00:00

Properly set up the HSSPI clock rate depending on the SoC's PLL rate. Signed-off-by: Jonas Gorski Signed-off-by: John Crispin Patchwork: http://patchwork.linux-mips.org/patch/6177/

MIPS: BCM63XX: expose the HSSPI clock

2014-01-22T19:18:49+00:00

Signed-off-by: Jonas Gorski Signed-off-by: John Crispin Patchwork: http://patchwork.linux-mips.org/patch/6178/

MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions

2013-07-02T13:59:11+00:00

Several drivers use the clk_{set,round}_rate() functions that need to be defined in the platform's clock code. The Broadcom BCM63xx platform hardcodes the clock rate so we create new clk_{set,round}_rate() functions which just return 0 like those in include/linux/clk.h for the common clock framework do. Also fixes the following build problem on a randconfig: drivers/built-in.o: In function `nop_usb_xceiv_probe': phy-nop.c:(.text+0x3ec26c): undefined reference to `clk_set_rate' Signed-off-by: Markos Chandras Acked-by: Steven J. Hill Acked-by: Florian Fainelli Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5580/ Signed-off-by: Ralf Baechle

MIPS: BCM63XX: add support for BCM3368 Cable Modem

2013-07-01T13:10:53+00:00

The Broadcom BCM3368 Cable Modem SoC is extremely similar to the existing BCM63xx DSL SoCs, in particular BCM6358, therefore little effort in the existing code base is required to get it supported. This patch adds support for the following on-chip peripherals: - two UARTS - GPIO - Ethernet - SPI - PCI - NOR Flash The most noticeable difference with 3368 is that it has its peripheral register at 0xfff8_0000 we check that separately in ioremap.h. Since 3368 is identical to 6358 for its clock and reset bits, we use them verbatim. Signed-off-by: Florian Fainelli Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: jogo@openwrt.org Patchwork: https://patchwork.linux-mips.org/patch/5499/ Signed-off-by: Ralf Baechle

MIPS: BCM63XX: add missing clocks for BCM6328 and BCM6362

2013-05-07T23:19:12+00:00

Add some mosty unused, but missing clocks for BCM6328 and BCM6362. This also fixes PCIe init on BCM6362. Signed-off-by: Jonas Gorski Patchwork: http://patchwork.linux-mips.org/patch/5200/ Acked-by: John Crispin

MIPS: BCM63XX: merge bcm63xx_clk.h into bcm63xx/clk.c

2013-05-07T23:19:04+00:00

All the header file does is provide the internal structure of clk, which shouldn't be used by anyone except clk.c itself anyway. Signed-off-by: Jonas Gorski Acked-by: Greg Kroah-Hartman Patchwork: http://patchwork.linux-mips.org/patch/5055/ Acked-by: John Crispin

MIPS: BCM63XX: enable SPI controller for BCM6362

2013-05-07T23:19:03+00:00

The SPI controller shares the same register layout as the 6358 one. Signed-off-by: Jonas Gorski Patchwork: http://patchwork.linux-mips.org/patch/5010/ Acked-by: John Crispin

MIPS: BCM63XX: use the new reset helper

2012-11-09T10:37:18+00:00

Use the new reset helper where appropriate. Signed-off-by: Jonas Gorski Patchwork: http://patchwork.linux-mips.org/patch/4453 Signed-off-by: John Crispin

MIPS: BCM63XX: add and use a clock for PCIe

2012-11-09T10:37:17+00:00

Add a PCIe clock and use that instead of directly touching the clock control register. While at it, fail if there is no such clock. Signed-off-by: Jonas Gorski Acked-by: Florian Fainelli Patchwork: http://patchwork.linux-mips.org/patch/4452 Signed-off-by: John Crispin

MIPS: BCM63XX: Expose the USBH/USBD clocks on BCM6328/BCM6368

2012-08-30T18:15:52+00:00

Signed-off-by: Kevin Cernekee Patchwork: http://patchwork.linux-mips.org/patch/4022/ Signed-off-by: John Crispin