BMC/Intel-BMC/linux.git/arch/mips/bcm63xx/boards, branch dev

MIPS: BCM63XX: add HSSPI platform device and register it

2014-01-22T19:18:50+00:00

Signed-off-by: Jonas Gorski Signed-off-by: John Crispin Patchwork: http://patchwork.linux-mips.org/patch/6180/

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2013-07-13T21:52:21+00:00

Pull MIPS updates from Ralf Baechle: "MIPS updates: - All the things that didn't make 3.10. - Removes the Windriver PPMC platform. Nobody will miss it. - Remove a workaround from kernel/irq/irqdomain.c which was there exclusivly for MIPS. Patch by Grant Likely. - More small improvments for the SEAD 3 platform - Improvments on the BMIPS / SMP support for the BCM63xx series. - Various cleanups of dead leftovers. - Platform support for the Cavium Octeon-based EdgeRouter Lite. Two large KVM patchsets didn't make it for this pull request because their respective authors are vacationing" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits) MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions MIPS: SEAD3: Disable L2 cache on SEAD-3. MIPS: BCM63xx: Enable second core SMP on BCM6328 if available MIPS: BCM63xx: Add SMP support to prom.c MIPS: define write{b,w,l,q}_relaxed MIPS: Expose missing pci_io{map,unmap} declarations MIPS: Malta: Update GCMP detection. Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET" MIPS: APSP: Remove SSB: Kconfig: Amend SSB_EMBEDDED dependencies MIPS: microMIPS: Fix improper definition of ISA exception bit. MIPS: Don't try to decode microMIPS branch instructions where they cannot exist. MIPS: Declare emulate_load_store_microMIPS as a static function. MIPS: Fix typos and cleanup comment MIPS: Cleanup indentation and whitespace MIPS: BMIPS: support booting from physical CPU other than 0 MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS MIPS: GIC: Fix gic_set_affinity infinite loop MIPS: Don't save/restore OCTEON wide multiplier state on syscalls. ...

MIPS: BCM63XX: add support for the Netgear CVG834G

2013-07-01T13:10:54+00:00

Add support for the Netgear CVG834G and enable the two UARTs, Ethernet on the first MAC, PCI and the two leds. Signed-off-by: Florian Fainelli Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: jogo@openwrt.org Cc: Florian Fainelli Patchwork: https://patchwork.linux-mips.org/patch/5502/ Signed-off-by: Ralf Baechle

MIPS: BCM63XX: let board specify an external GPIO to reset PHY

2013-07-01T13:10:54+00:00

Some boards may need to reset their external PHY or switch they are attached to, add a hook for doing this along with providing custom linux/gpio.h flags for doing this. Signed-off-by: Florian Fainelli Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: jogo@openwrt.org Cc: Florian Fainelli Patchwork: https://patchwork.linux-mips.org/patch/5501/ Signed-off-by: Ralf Baechle

MIPS: BCM63XX: recognize Cable Modem firmware format

2013-07-01T13:10:53+00:00

Add the firmware header format which is used by Broadcom Cable Modem SoCs such as the BCM3368 SoC. We export the bcm_hcs firmware format structure because it is used by user-land tools to create firmware images for these SoCs and will later be used by a corresponding MTD parser. Signed-off-by: Florian Fainelli Cc: linux-mips@linux-mips.org Cc: cernekee@gmail.com Cc: jogo@openwrt.org Patchwork: https://patchwork.linux-mips.org/patch/5496/ Signed-off-by: Ralf Baechle

bcm63xx_enet: add support for Broadcom BCM63xx integrated gigabit switch

2013-06-10T21:28:28+00:00

Newer Broadcom BCM63xx SoCs: 6328, 6362 and 6368 have an integrated switch which needs to be driven slightly differently from the traditional external switches. This patch introduces changes in arch/mips/bcm63xx in order to: - register a bcm63xx_enetsw driver instead of bcm63xx_enet driver - update DMA channels configuration & state RAM base addresses - add a new platform data configuration knob to define the number of ports per switch/device and force link on some ports - define the required switch registers On the driver side, the following changes are required: - the switch ports need to be polled to ensure the link is up and running and RX/TX can properly work - basic switch configuration needs to be performed for the switch to forward packets to the CPU - update the MIB counters since the integrated Signed-off-by: Maxime Bizon Signed-off-by: Jonas Gorski Signed-off-by: David S. Miller

MIPS: BCM63XX: add basic BCM6362 support

2013-05-07T23:19:03+00:00

Add basic support for detecting and booting the BCM6362. Signed-off-by: Jonas Gorski Patchwork: http://patchwork.linux-mips.org/patch/5009/ Acked-by: John Crispin

MIPS: BCM63XX: Make nvram checksum failure non fatal

2013-03-19T18:15:40+00:00

Some vendors modify the nvram layout moving the checksum to a different place or dropping entirely, so reduce the checksum failure to a warning. Reported-by: Álvaro Fernández Rojas Signed-off-by: Jonas Gorski Cc: linux-mips@linux-mips.org Cc: John Crispin Cc: Maxime Bizon Cc: Florian Fainelli Cc: Kevin Cernekee Signed-off-by: Ralf Baechle

MIPS: Whitespace cleanup.

2013-02-01T09:00:22+00:00

Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle

MIPS: BCM63XX: move nvram functions into their own file

2012-11-09T10:37:18+00:00

Refactor nvram related functions into its own unit for easier expansion and exposure of the values to other drivers. Signed-off-by: Jonas Gorski Patchwork: http://patchwork.linux-mips.org/patch/4516 Signed-off-by: John Crispin