BMC/Intel-BMC/linux.git/arch/ia64, branch dev-4.3

[IA64] Wire up kcmp syscall

2015-10-28T21:22:59+00:00

systemd > 218 fails to compile on ia64 with: error: ‘__NR_kcmp’ undeclared [1]. I've been told that this is because the kcmp syscall hasn't been wired up for the ia64 arch [2]. The proposed patch thus wire up the kcmp syscall for the ia64 arch. [1] https://bugs.gentoo.org/show_bug.cgi?id=560492 [2] https://bugs.gentoo.org/show_bug.cgi?id=560492#c17 Signed-off-by: Émeric MASCHINO Signed-off-by: Tony Luck

Merge branch 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile

2015-10-04T15:31:13+00:00

Pull strscpy string copy function implementation from Chris Metcalf. Chris sent this during the merge window, but I waffled back and forth on the pull request, which is why it's going in only now. The new "strscpy()" function is definitely easier to use and more secure than either strncpy() or strlcpy(), both of which are horrible nasty interfaces that have serious and irredeemable problems. strncpy() has a useless return value, and doesn't NUL-terminate an overlong result. To make matters worse, it pads a short result with zeroes, which is a performance disaster if you have big buffers. strlcpy(), by contrast, is a mis-designed "fix" for strlcpy(), lacking the insane NUL padding, but having a differently broken return value which returns the original length of the source string. Which means that it will read characters past the count from the source buffer, and you have to trust the source to be properly terminated. It also makes error handling fragile, since the test for overflow is unnecessarily subtle. strscpy() avoids both these problems, guaranteeing the NUL termination (but not excessive padding) if the destination size wasn't zero, and making the overflow condition very obvious by returning -E2BIG. It also doesn't read past the size of the source, and can thus be used for untrusted source data too. So why did I waffle about this for so long? Every time we introduce a new-and-improved interface, people start doing these interminable series of trivial conversion patches. And every time that happens, somebody does some silly mistake, and the conversion patch to the improved interface actually makes things worse. Because the patch is mindnumbing and trivial, nobody has the attention span to look at it carefully, and it's usually done over large swatches of source code which means that not every conversion gets tested. So I'm pulling the strscpy() support because it *is* a better interface. But I will refuse to pull mindless conversion patches. Use this in places where it makes sense, but don't do trivial patches to fix things that aren't actually known to be broken. * 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: use global strscpy() rather than private copy string: provide strscpy() Make asm/word-at-a-time.h available on all architectures

Merge tag 'pci-v4.3-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2015-09-25T18:16:53+00:00

Pull PCI fixes from Bjorn Helgaas: "These are fixes for things we merged for v4.3 (VPD, MSI, and bridge window management), and a new Renesas R8A7794 SoC device ID. Details: Resource management: - Revert pci_read_bridge_bases() unification (Bjorn Helgaas) - Clear IORESOURCE_UNSET when clipping a bridge window (Bjorn Helgaas) MSI: - Fix MSI IRQ domains for VFs on virtual buses (Alex Williamson) Renesas R-Car host bridge driver: - Add R8A7794 support (Sergei Shtylyov) Miscellaneous: - Fix devfn for VPD access through function 0 (Alex Williamson) - Use function 0 VPD only for identical functions (Alex Williamson)" * tag 'pci-v4.3-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: rcar: Add R8A7794 support PCI: Use function 0 VPD for identical functions, regular VPD for others PCI: Fix devfn for VPD access through function 0 PCI/MSI: Fix MSI IRQ domains for VFs on virtual buses PCI: Clear IORESOURCE_UNSET when clipping a bridge window PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code"

ia64: Enable userfaultfd and membarrier system calls

2015-09-15T23:22:45+00:00

Signed-off-by: Tony Luck Signed-off-by: Linus Torvalds

PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code"

2015-09-15T18:18:04+00:00

Revert dff22d2054b5 ("PCI: Call pci_read_bridge_bases() from core instead of arch code"). Reading PCI bridge windows is not arch-specific in itself, but there is PCI core code that doesn't work correctly if we read them too early. For example, Hannes found this case on an ARM Freescale i.mx6 board: pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff] pci 0000:00:00.0: PCI bridge to [bus 01-ff] pci 0000:00:00.0: BAR 8: no space for [mem size 0x01000000] (mem window) pci 0000:01:00.0: BAR 2: failed to assign [mem size 0x00200000] pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x00004000] pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x00000100] The 00:00.0 mem window needs to be at least 3MB: the 01:00.0 device needs 0x204100 of space, and mem windows are megabyte-aligned. Bus sizing can increase a bridge window size, but never *decrease* it (see d65245c3297a ("PCI: don't shrink bridge resources")). Prior to dff22d2054b5, ARM didn't read bridge windows at all, so the "original size" was zero, and we assigned a 3MB window. After dff22d2054b5, we read the bridge windows before sizing the bus. The firmware programmed a 16MB window (size 0x01000000) in 00:00.0, and since we never decrease the size, we kept 16MB even though we only needed 3MB. But 16MB doesn't fit in the host bridge aperture, so we failed to assign space for the window and the downstream devices. I think this is a defect in the PCI core: we shouldn't rely on the firmware to assign sensible windows. Ray reported a similar problem, also on ARM, with Broadcom iProc. Issues like this are too hard to fix right now, so revert dff22d2054b5. Reported-by: Hannes Reported-by: Ray Jui Link: http://lkml.kernel.org/r/CAAa04yFQEUJm7Jj1qMT57-LG7ZGtnhNDBe=PpSRa70Mj+XhW-A@mail.gmail.com Link: http://lkml.kernel.org/r/55F75BB8.4070405@broadcom.com Signed-off-by: Bjorn Helgaas Acked-by: Yinghai Lu Acked-by: Lorenzo Pieralisi

dma-mapping: consolidate dma_set_mask

2015-09-10T20:29:01+00:00

Almost everyone implements dma_set_mask the same way, although some time that's hidden in ->set_dma_mask methods. This patch consolidates those into a common implementation that either calls ->set_dma_mask if present or otherwise uses the default implementation. Some architectures used to only call ->set_dma_mask after the initial checks, and those instance have been fixed to do the full work. h8300 implemented dma_set_mask bogusly as a no-ops and has been fixed. Unfortunately some architectures overload unrelated semantics like changing the dma_ops into it so we still need to allow for an architecture override for now. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: Christoph Hellwig Cc: Arnd Bergmann Cc: Russell King Cc: Catalin Marinas Cc: Will Deacon Cc: Yoshinori Sato Cc: Michal Simek Cc: Jonas Bonn Cc: Chris Metcalf Cc: Guan Xuetao Cc: Ralf Baechle Cc: Benjamin Herrenschmidt Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Andy Shevchenko Signed-off-by: Max Filippov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

dma-mapping: consolidate dma_supported

2015-09-10T20:29:01+00:00

Most architectures just call into ->dma_supported, but some also return 1 if the method is not present, or 0 if no dma ops are present (although that should never happeb). Consolidate this more broad version into common code. Also fix h8300 which inorrectly always returned 0, which would have been a problem if it's dma_set_mask implementation wasn't a similarly buggy noop. As a few architectures have much more elaborate implementations, we still allow for arch overrides. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: Christoph Hellwig Cc: Arnd Bergmann Cc: Russell King Cc: Catalin Marinas Cc: Will Deacon Cc: Yoshinori Sato Cc: Michal Simek Cc: Jonas Bonn Cc: Chris Metcalf Cc: Guan Xuetao Cc: Ralf Baechle Cc: Benjamin Herrenschmidt Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Andy Shevchenko Signed-off-by: Max Filippov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

dma-mapping: cosolidate dma_mapping_error

2015-09-10T20:29:01+00:00

Currently there are three valid implementations of dma_mapping_error: (1) call ->mapping_error (2) check for a hardcoded error code (3) always return 0 This patch provides a common implementation that calls ->mapping_error if present, then checks for DMA_ERROR_CODE if defined or otherwise returns 0. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: Christoph Hellwig Cc: Arnd Bergmann Cc: Russell King Cc: Catalin Marinas Cc: Will Deacon Cc: Yoshinori Sato Cc: Michal Simek Cc: Jonas Bonn Cc: Chris Metcalf Cc: Guan Xuetao Cc: Ralf Baechle Cc: Benjamin Herrenschmidt Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Andy Shevchenko Signed-off-by: Max Filippov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

dma-mapping: consolidate dma_{alloc,free}_noncoherent

2015-09-10T20:29:01+00:00

Most architectures do not support non-coherent allocations and either define dma_{alloc,free}_noncoherent to their coherent versions or stub them out. Openrisc uses dma_{alloc,free}_attrs to implement them, and only Mips implements them directly. This patch moves the Openrisc version to common code, and handles the DMA_ATTR_NON_CONSISTENT case in the mips dma_map_ops instance. Note that actual non-coherent allocations require a dma_cache_sync implementation, so if non-coherent allocations didn't work on an architecture before this patch they still won't work after it. [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: Christoph Hellwig Cc: Arnd Bergmann Cc: Russell King Cc: Catalin Marinas Cc: Will Deacon Cc: Yoshinori Sato Cc: Michal Simek Cc: Jonas Bonn Cc: Chris Metcalf Cc: Guan Xuetao Cc: Ralf Baechle Cc: Benjamin Herrenschmidt Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Andy Shevchenko Signed-off-by: Max Filippov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

dma-mapping: consolidate dma_{alloc,free}_{attrs,coherent}

2015-09-10T20:29:01+00:00

Since 2009 we have a nice asm-generic header implementing lots of DMA API functions for architectures using struct dma_map_ops, but unfortunately it's still missing a lot of APIs that all architectures still have to duplicate. This series consolidates the remaining functions, although we still need arch opt outs for two of them as a few architectures have very non-standard implementations. This patch (of 5): The coherent DMA allocator works the same over all architectures supporting dma_map operations. This patch consolidates them and converges the minor differences: - the debug_dma helpers are now called from all architectures, including those that were previously missing them - dma_alloc_from_coherent and dma_release_from_coherent are now always called from the generic alloc/free routines instead of the ops dma-mapping-common.h always includes dma-coherent.h to get the defintions for them, or the stubs if the architecture doesn't support this feature - checks for ->alloc / ->free presence are removed. There is only one magic instead of dma_map_ops without them (mic_dma_ops) and that one is x86 only anyway. Besides that only x86 needs special treatment to replace a default devices if none is passed and tweak the gfp_flags. An optional arch hook is provided for that. [linux@roeck-us.net: fix build] [jcmvbkbc@gmail.com: fix xtensa] Signed-off-by: Christoph Hellwig Cc: Arnd Bergmann Cc: Russell King Cc: Catalin Marinas Cc: Will Deacon Cc: Yoshinori Sato Cc: Michal Simek Cc: Jonas Bonn Cc: Chris Metcalf Cc: Guan Xuetao Cc: Ralf Baechle Cc: Benjamin Herrenschmidt Cc: Ingo Molnar Cc: Thomas Gleixner Cc: "H. Peter Anvin" Cc: Andy Shevchenko Signed-off-by: Guenter Roeck Signed-off-by: Max Filippov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds