BMC/Intel-BMC/linux.git/arch/csky/Kconfig, branch dev-5.2

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge tag 'dma-mapping-5.2' of git://git.infradead.org/users/hch/dma-mapping

2019-05-09T15:40:55+00:00

Pull DMA mapping updates from Christoph Hellwig: - remove the already broken support for NULL dev arguments to the DMA API calls - Kconfig tidyups * tag 'dma-mapping-5.2' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: add a Kconfig symbol to indicate arch_dma_prep_coherent presence dma-mapping: remove an unnecessary NULL check x86/dma: Remove the x86_dma_fallback_dev hack dma-mapping: remove leftover NULL device support arm: use a dummy struct device for ISA DMA use of the DMA API pxa3xx-gcu: pass struct device to dma_mmap_coherent gbefb: switch to managed version of the DMA allocator da8xx-fb: pass struct device to DMA API functions parport_ip32: pass struct device to DMA API functions dma: select GENERIC_ALLOCATOR for DMA_REMAP

Merge tag 'csky-for-linus-5.2-rc1' of git://github.com/c-sky/csky-linux

2019-05-08T18:41:08+00:00

Pull arch/csky updates from Guo Ren: - Fixup vdsp&fpu issues in kernel - Add dynamic function tracer - Use in_syscall & forget_syscall instead of r11_sig - Reconstruct signal processing - Support dynamic start physical address - Fixup wrong update_mmu_cache implementation - Support vmlinux bootup with MMU off - Use va_pa_offset instead of phys_offset - Fixup syscall_trace return processing flow - Add perf callchain support - Add perf_arch_fetch_caller_regs support - Add page fault perf event support - Add support for perf registers sampling * tag 'csky-for-linus-5.2-rc1' of git://github.com/c-sky/csky-linux: csky/syscall_trace: Fixup return processing flow csky: Fixup compile warning csky: Add support for perf registers sampling csky: add page fault perf event support csky: Use va_pa_offset instead of phys_offset csky: Support vmlinux bootup with MMU off csky: Add perf_arch_fetch_caller_regs support csky: Fixup wrong update_mmu_cache implementation csky: Support dynamic start physical address csky: Reconstruct signal processing csky: Use in_syscall & forget_syscall instead of r11_sig csky: Add non-uapi asm/ptrace.h namespace csky: mm/fault.c: Remove duplicate header csky: remove redundant generic-y csky: Update syscall_trace_enter/exit implementation csky: Add perf callchain support csky/ftrace: Add dynamic function tracer (include graph tracer) csky: Fixup vdsp&fpu issues in kernel

dma-mapping: add a Kconfig symbol to indicate arch_dma_prep_coherent presence

2019-05-06T13:04:40+00:00

Add a Kconfig symbol that indicates an architecture provides a arch_dma_prep_coherent implementation, and provide a stub otherwise. This will allow the generic dma-iommu code to use it while still allowing to be built for cache coherent architectures. Signed-off-by: Christoph Hellwig Reviewed-by: Robin Murphy

csky: Add support for perf registers sampling

2019-04-22T05:44:57+00:00

This patch implements the perf registers sampling and validation API for csky arch. The valid registers and their register ID are defined in perf_regs.h. Perf tool can backtrace in userspace with unwind library and the registers/user stack dump support. Signed-off-by: Mao Han Signed-off-by: Guo Ren

csky: Update syscall_trace_enter/exit implementation

2019-04-22T05:44:57+00:00

Previous syscall_trace implementation couldn't support AUDITSYSCALL and SYSCALL_TRACEPOINTS. Now we redesign it to support audit_syscall and syscall_tracepoints just like other archs'. Signed-off-by: Guo Ren Cc: Dmitry V. Levin Cc: Arnd Bergmann

csky/ftrace: Add dynamic function tracer (include graph tracer)

2019-04-22T05:44:57+00:00

Support dynamic ftrace including dynamic graph tracer. Gcc-csky with -pg will produce call site in every function prologue and we can use these call site to hook trace function. gcc with -pg origin call site: push lr jbsr _mcount nop32 nop32 If the (callee - caller)'s offset is in range of bsr instruction, we'll modify code with: push lr bsr _mcount nop32 nop32 Else if the (callee - caller)'s offset is out of bsr instrunction, we'll modify code with: push lr movih r26, ... ori r26, ... jsr r26 (r26 is reserved for jsr link reg in csky abiv2 spec.) Signed-off-by: Guo Ren

locking/rwsem: Remove rwsem-spinlock.c & use rwsem-xadd.c for all archs

2019-04-03T12:50:52+00:00

Currently, we have two different implementation of rwsem: 1) CONFIG_RWSEM_GENERIC_SPINLOCK (rwsem-spinlock.c) 2) CONFIG_RWSEM_XCHGADD_ALGORITHM (rwsem-xadd.c) As we are going to use a single generic implementation for rwsem-xadd.c and no architecture-specific code will be needed, there is no point in keeping two different implementations of rwsem. In most cases, the performance of rwsem-spinlock.c will be worse. It also doesn't get all the performance tuning and optimizations that had been implemented in rwsem-xadd.c over the years. For simplication, we are going to remove rwsem-spinlock.c and make all architectures use a single implementation of rwsem - rwsem-xadd.c. All references to RWSEM_GENERIC_SPINLOCK and RWSEM_XCHGADD_ALGORITHM in the code are removed. Suggested-by: Peter Zijlstra Signed-off-by: Waiman Long Signed-off-by: Peter Zijlstra (Intel) Acked-by: Linus Torvalds Cc: Andrew Morton Cc: Arnd Bergmann Cc: Borislav Petkov Cc: Davidlohr Bueso Cc: H. Peter Anvin Cc: Paul E. McKenney Cc: Thomas Gleixner Cc: Tim Chen Cc: Will Deacon Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: linux-m68k@lists.linux-m68k.org Cc: linux-riscv@lists.infradead.org Cc: linux-um@lists.infradead.org Cc: linux-xtensa@linux-xtensa.org Cc: linuxppc-dev@lists.ozlabs.org Cc: nios2-dev@lists.rocketboards.org Cc: openrisc@lists.librecores.org Cc: uclinux-h8-devel@lists.sourceforge.jp Link: https://lkml.kernel.org/r/20190322143008.21313-3-longman@redhat.com Signed-off-by: Ingo Molnar

Merge tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping

2019-03-10T18:54:48+00:00

Pull DMA mapping updates from Christoph Hellwig: - add debugfs support for dumping dma-debug information (Corentin Labbe) - Kconfig cleanups (Andy Shevchenko and me) - debugfs cleanups (Greg Kroah-Hartman) - improve dma_map_resource and use it in the media code - arch_setup_dma_ops / arch_teardown_dma_ops cleanups - various small cleanups and improvements for the per-device coherent allocator - make the DMA mask an upper bound and don't fail "too large" dma mask in the remaning two architectures - this will allow big driver cleanups in the following merge windows * tag 'dma-mapping-5.1' of git://git.infradead.org/users/hch/dma-mapping: (21 commits) Documentation/DMA-API-HOWTO: update dma_mask sections sparc64/pci_sun4v: allow large DMA masks sparc64/iommu: allow large DMA masks sparc64: refactor the ali DMA quirk ccio: allow large DMA masks dma-mapping: remove the DMA_MEMORY_EXCLUSIVE flag dma-mapping: remove dma_mark_declared_memory_occupied dma-mapping: move CONFIG_DMA_CMA to kernel/dma/Kconfig dma-mapping: improve selection of dma_declare_coherent availability dma-mapping: remove an incorrect __iommem annotation of: select OF_RESERVED_MEM automatically device.h: dma_mem is only needed for HAVE_GENERIC_DMA_COHERENT mfd/sm501: depend on HAS_DMA dma-mapping: add a kconfig symbol for arch_teardown_dma_ops availability dma-mapping: add a kconfig symbol for arch_setup_dma_ops availability dma-mapping: move debug configuration options to kernel/dma dma-debug: add dumping facility via debugfs dma: debug: no need to check return value of debugfs_create functions videobuf2: replace a layering violation with dma_map_resource dma-mapping: don't BUG when calling dma_map_resource on RAM ...

dma-mapping: improve selection of dma_declare_coherent availability

2019-02-20T14:26:35+00:00

This API is primarily used through DT entries, but two architectures and two drivers call it directly. So instead of selecting the config symbol for random architectures pull it in implicitly for the actual users. Also rename the Kconfig option to describe the feature better. Signed-off-by: Christoph Hellwig Acked-by: Paul Burton # MIPS Acked-by: Lee Jones Reviewed-by: Greg Kroah-Hartman