BMC/Intel-BMC/linux.git/arch/arm64/boot/dts/broadcom, branch dev-5.2

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46+00:00

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

Merge tag 'arm-soc/for-5.1/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt

2019-02-15T14:28:45+00:00

This pull request contains Broadcom ARM64-based SoCs Device Tree updates for 5.1, please pull the following: - Stefan adds support for the Raspberry Pi 3 A+ by using the same mechanism of creating a symbolic reference to the ARM 32-bit DTS file * tag 'arm-soc/for-5.1/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: broadcom: Add reference to RPi 3 A+ ARM: dts: add Raspberry Pi 3 A+ Signed-off-by: Arnd Bergmann

arm64: dts: broadcom: Add reference to RPi 3 A+

2019-02-01T22:35:26+00:00

This adds a reference to the dts of the Raspberry Pi 3 A+, so we don't need to maintain the content in arm64. Signed-off-by: Stefan Wahren Reviewed-by: Eric Anholt

arm64: dts: Remove inconsistent use of 'arm,armv8' compatible string

2019-01-30T16:34:36+00:00

The 'arm,armv8' compatible string is only for software models. It adds little value otherwise and is inconsistently used as a fallback on some platforms. Remove it from those platforms. This fixes warnings generated by the DT schema. Reported-by: Michal Simek Cc: Mark Rutland Cc: Will Deacon Acked-by: Antoine Tenart Acked-by: Nishanth Menon Acked-by: Maxime Ripard Acked-by: Manivannan Sadhasivam Acked-by: Chanho Min Acked-by: Krzysztof Kozlowski Acked-by: Masahiro Yamada Acked-by: Gregory CLEMENT Acked-by: Thierry Reding Acked-by: Heiko Stuebner Acked-by: Simon Horman Acked-by: Tero Kristo Acked-by: Wei Xu Acked-by: Liviu Dudau Acked-by: Matthias Brugger Acked-by: Michal Simek Acked-by: Scott Branden Acked-by: Kevin Hilman Acked-by: Chunyan Zhang Acked-by: Robert Richter Acked-by: Jisheng Zhang Acked-by: Dinh Nguyen Signed-off-by: Rob Herring Signed-off-by: Arnd Bergmann

arm64: dts: broadcom: Use the .dtb name in the rule, rather than .dts

2018-09-25T18:49:51+00:00

Commit a7eb26392b893 ("arm64: dts: broadcom: Add reference to Compute Module IO Board V3") adds the bcm2837-rpi-cm3-io3.dts file as a target in the Makefile, rather than the .dtb name. This will skip the generation of the .dtb file at compile time and will fail the dtbs_install target. Fixes: a7eb26392b893 ("arm64: dts: broadcom: Add reference to Compute Module IO Board V3") Signed-off-by: Liviu Dudau Acked-by: Stefan Wahren Signed-off-by: Olof Johansson

arm64: dts: broadcom: Fix I2C and SPI bus warnings

2018-09-13T22:05:47+00:00

dtc has new checks for I2C and SPI buses. Fix the warnings in node names and unit-addresses. arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dtb: Warning (i2c_bus_reg): /hsls/i2c@e0000/pcf8574@20: I2C bus unit address format error, expected "27" arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dtb: Warning (i2c_bus_reg): /hsls/i2c@e0000/pcf8574@20: I2C bus unit address format error, expected "27" arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dtb: Warning (spi_bus_bridge): /hsls/ssp@180000: node name for SPI buses should be 'spi' arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dtb: Warning (spi_bus_bridge): /hsls/ssp@190000: node name for SPI buses should be 'spi' Cc: Ray Jui Cc: Scott Branden Cc: Jon Mason Cc: bcm-kernel-feedback-list@broadcom.com Signed-off-by: Rob Herring Acked-by: Scott Branden Signed-off-by: Florian Fainelli

arm64: dts: broadcom: Add reference to Compute Module IO Board V3

2018-08-31T05:01:34+00:00

This adds a reference to the dts of the Compute Module IO Board V3 in arm, so we don't need to maintain the content in arm64. Signed-off-by: Stefan Wahren

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2018-08-23T21:02:22+00:00

Pull ARM device-tree updates from Olof Johansson: "Business as usual -- the bulk of our changes are to devicetree files with new hardware support, new SoCs and platforms, and new board types. New SoCs/platforms: - Raspberry Pi Compute Module (CM1) and IO board - i.MX6SSL from NXP - Renesas RZ/N1D SoC (R9A06G032), Dual Cortex-A7 with Ethernet, CAN and PLC interfaces - TI AM654 SoC, Quad Cortex-A53, safety subsystem with Cortex-R5 controllers, communication and PRU subsystem and lots of other interfaces (PCIe, USB3, etc). New boards and systems: - Several Atmel at91-based boards from Laird - Marvell Armada388-based Helios4 board from SolidRun - Samsung Aires-based phones (s5pv210) - Allwinner A64-based Pinebook laptop In addition to the above, there's the usual amount of new devices described on existing platforms, fixes and tweaks and new minor variants of boards/platforms" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (478 commits) arm64: dts: sdm845: Add tsens nodes arm64: dts: msm8996: thermal: Initialise via DT and add second controller arm64: dts: sprd: Add one suspend timer arm64: dts: sprd: Add SC27XX ADC device arm64: dts: sprd: Add SC27XX eFuse device arm64: dts: sprd: Add SC27XX vibrator device arm64: dts: sprd: Add SC27XX breathing light controller device arm64: dts: meson-axg: add spdif-dit codec arm64: dts: meson-axg: add lineout codec arm64: dts: meson-axg: add linein codec arm64: dts: meson-axg: add tdm interfaces arm64: dts: meson-axg: add tdmout formatters arm64: dts: meson-axg: add tdmin formatters arm64: dts: meson-axg: add spdifout arm64: dts: rockchip: add led support for Firefly-RK3399 arm64: dts: rockchip: remove deprecated Type-C PHY properties on rk3399 arm64: dts: rockchip: add power button support for Firefly-RK3399 ARM: dts: aspeed: Add coprocessor interrupt controller arm64: dts: meson-axg: add audio arb reset controller arm64: dts: meson-axg: add usb power regulator ...

arm64: dts: Fix the base address of the Broadcom iProc mdio mux

2018-08-02T21:36:49+00:00

Modify the base address of the mdio mux driver to point to the start of the mdio mux block's register address space. Signed-off-by: Arun Parameswaran Reviewed-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller

Merge tag 'arm-soc/for-4.19/devicetree-arm64' of https://github.com/Broadcom/stblinux into next/dt

2018-07-14T21:11:41+00:00

This pull request contains Broadcom ARM64-based SoCs Device Tree changes for 4.19, please pull the following: - Scott does a bunch of updates to the Stingray DTS and DTS include files to better support the addition of new boards. Scott also adds the Stingray OTP Device Tree node - Pramod updates the Stingray clocks such that they match the latest revision of the ASIC and datasheets - Ray sets the Stingray initial watchdog timeout to 60 seconds to give sufficient time for the kernel to boot and then adds PAXC (internal PCIe) support to the Stingray base DTS files - Vladimir adds support for the Stingray smart NIC PS225 boards variants * tag 'arm-soc/for-4.19/devicetree-arm64' of https://github.com/Broadcom/stblinux: arm64: dts: stingray: add bcm958802a802x dts arm64: dts: stingray: add PAXC support arm64: dts: set initial SR watchdog timeout to 60 seconds arm64: dts: Update Stingray clock DT nodes arm64: dts: stingray: Add OTP device node arm64: dts: stingray: move common board components to stingray-board-base Signed-off-by: Olof Johansson